by Different Computers » Thu Nov 21, 2019 1:00 pm
raneil wrote:DHCP is not supported, so you must assign a static IP address suitable for your network. Factory defaults are:IP address: 192.168.1.167Netmask: 255.255.255.0Default Gateway: 192.168.1.1HTTP Port: 80TCP Port: 1234User name: "admin"Password: "12345678"
by Different Computers » Thu Nov 21, 2019 11:23 am
by howartp » Thu Nov 21, 2019 1:18 am
by Different Computers » Wed Nov 20, 2019 6:33 pm
by jens » Mon Nov 04, 2019 11:55 pm
http://admin:12345678@192.168.1.167/relay_en.cgi?saida=1&relayCommand=on
http://admin:12345678@192.168.1.167/relay_en.cgi?saida1relayCommand=on
by matt (support) » Sun Jan 06, 2019 1:49 pm
by TwitchCaptain » Thu Jan 03, 2019 1:58 am
by jens » Thu Dec 13, 2018 2:33 pm
by TwitchCaptain » Wed Dec 12, 2018 9:13 pm
by siclark » Sun Dec 09, 2018 4:24 am
by DomoPat » Sun Dec 09, 2018 2:42 am
siclark wrote:I'm not good with electrics but could the inputs be used to detect current from a PIR, one that is already powered by the alarm panel?
by siclark » Sat Dec 08, 2018 1:40 pm
by DomoPat » Wed Nov 28, 2018 9:36 am
by mundmc » Mon Nov 26, 2018 6:48 pm
TwitchCaptain wrote:Just for fun, you can see some photos of my setup here: https://imgur.com/a/UdJzcTp?
by siclark » Sun Nov 25, 2018 3:09 pm
Top