LED Simple Effects Plugin (for Fibaro RGBW)

Posted on
Wed Dec 28, 2016 8:39 pm
GlennNZ offline
Posts: 139
Joined: Dec 07, 2014

LED Simple Effects Plugin (for Fibaro RGBW)

Hi all,

Announcing a very simple new Plugin -
LED Simple Effects

For Indigo 7

https://github.com/Ghawken/Indigo-SimpleLED

Enables the Fibaro RGBW pre-programmed color cycles to be selected as an Action Group.
(yes, yes - you can do this already with Z-wave modify config action command - once you know the parameters and the settings - however this simplifies the process)
(I did mention it was a simple plugin - didn't I?)

The Plugin - essentially doesn't run unless a action command/group is executed.

The image below are the current options - essentially for the Fibaro RGB only currently (awaiting some fixes to enable the Aeon Labs RGB bulbs in addition.)

Image

Image


These are the pre-programmed Fibaro modes - so there is no Z-wave communication during the light changes - simply this command to start and/or end the process. In my mind the various default modes cover most basic usages and limits any Z-wave traffic issues that might occur with other solutions.


Glenn
Last edited by GlennNZ on Thu Dec 29, 2016 2:52 pm, edited 1 time in total.

Posted on
Thu Dec 29, 2016 11:16 am
yassi offline
Posts: 337
Joined: Sep 06, 2015
Location: Germany

Re: LED Simple Effects Plugin (for Fibaro RGBW)

HI Glenn,

this is cool.

I wanted to give it a try, but when I create an action group I can't select the device, no device available.
I have my Fibaro RGBW running with the "LED Light Manager" plugin, have the devices (as separate colors, composite and white already in Indigo).
Am I missing something?

Thanks,
Yassi
Attachments
Bildschirmfoto 2016-12-29 um 18.08.21.png
Bildschirmfoto 2016-12-29 um 18.08.21.png (241.16 KiB) Viewed 520 times
Bildschirmfoto 2016-12-29 um 18.13.01.png
Bildschirmfoto 2016-12-29 um 18.13.01.png (66.23 KiB) Viewed 520 times

Posted on
Thu Dec 29, 2016 1:58 pm
GlennNZ offline
Posts: 139
Joined: Dec 07, 2014

Re: LED Simple Effects Plugin (for Fibaro RGBW)

yassi wrote:
HI Glenn,

this is cool.

I wanted to give it a try, but when I create an action group I can't select the device, no device available.
I have my Fibaro RGBW running with the "LED Light Manager" plugin, have the devices (as separate colors, composite and white already in Indigo).
Am I missing something?

Thanks,
Yassi


I guess you are on Indigo6 - given the write device info to Log button?

Sorry - Indigo 7 only as uses the new device filtering - which is why unfortunately you don't see any devices!
:D

Glenn

Posted on
Fri Dec 30, 2016 12:28 am
yassi offline
Posts: 337
Joined: Sep 06, 2015
Location: Germany

Re: LED Simple Effects Plugin (for Fibaro RGBW)

Glenn, sorry, didn't saw it's for Indigo 7 only.
Ok, I've bought the upgrade yesterday, will upgrade today.

Thx,
Yassi

Posted on
Fri Dec 30, 2016 5:35 am
yassi offline
Posts: 337
Joined: Sep 06, 2015
Location: Germany

Re: LED Simple Effects Plugin (for Fibaro RGBW)

Glenn, it's working, cool stuff!
Thanks!

Yassi

Posted on
Fri Dec 30, 2016 5:50 am
GlennNZ offline
Posts: 139
Joined: Dec 07, 2014

Re: LED Simple Effects Plugin (for Fibaro RGBW)

Thanks!
Good to hear.
Will add support for AeonLab LED bulbs predefined modes soon.
Glenn

Posted on
Fri Dec 30, 2016 9:36 am
yassi offline
Posts: 337
Joined: Sep 06, 2015
Location: Germany

Re: LED Simple Effects Plugin (for Fibaro RGBW)

Cool.
I don't own them (only Hue's), but I appreciate this!
Yassi

Page 1 of 1

Who is online

Users browsing this forum: No registered users and 0 guests