[ANSWERED]: Home Energy Meter DSB09104-ZWEU

i try to switch from Fibaro to Indigo
I want use Home Energy Meter DSB09104-ZWEU with 2 Clamp
I think that the parametrer 101=16131 is not the correct value.
I receive Clamp1 and Clamp 2 watt and kWh value correct, but for the Meter total ,receive only battery status (but i do not use because are powered) and watt , but no kWh value.
I try to change the 101 parameter to 6926 (but i try also other values) with Z-Wave->Modify Configuration Parameter, but i think not work.
I never see anything in the Event log,but the read current from devace work.
Now i use this workaround: i schedule for the device a request update every 15 min. and with this command receive the Total kWh values.

[matt (support)]

I'm afraid I don't know why it is failing to send kWh for the entire meter. The value Indigo is setting (16131 which in hex is 3F03) is correct – I just double checked. That should enable both W and kWh reporting for clamp 1, clamp 2, and the entire meter. You might want to ask Aeotec about the problem. It might be a firmware bug or limitation.