I've attached 3 pics from the thermostat manual to clarify this. There are 4 modes-- 5 if you count "off"
Off
Heat (1 set point)
Cool (1 set point)
Auto (1 heat and 1 cool set point ) indigo reports this as "auto mode"
Time of Day mode (1 heat and 1 cool set point for each of 4 time of day settings for when you wake/leave/return/sleep). When this mode is active, indigo reports it as "program auto mode")
My problem is that if you use a control page to modify the mode, it only cycles between off/heat/cool/auto mode. It does not address the last mode, time of day mode (or program auto whatever you want to call it). Additionally the indigo commands to set the mode directly to this mode do not seem to exist. This is my 'go to' mode that the thermostat runs in 95% of the time for me, the one I need to get back into after making a manual remote adjustment from a control page.
I need to be able to set to this mode remotely or via indigo commands as it serves as a redundant failsafe so my thermostat will know how I want the house temps set should indigo not be able to communicate with it at some point.
Additionally the thermostat has an "energy" button that moves the set points by 6 degrees when pressed and it would be nice to have this feature available from indigo as well.
Thank you for the quick replies by the way. Hope this clarifies my request.