Recently I had an awning fitted which uses a Dooya remote control compatible with RFXCOM. I created an Indigo device with the appropriate config using HouseCode 5188D5. All worked well, but then I started getting error messages:
RFXCOM Error Unknown device detected (type = 25). Select a BlindsT1234 Device from the list of devices
RFXCOM Error HouseCode (hex)=E37B7D ,subtype (int)=6 ,unitCode (int)=193
In an effort to stop the error messages I tried creating another Indigo device with the config specified in the error message, but the error messages persist.
Here are the relevant log entries:
2023-07-30 12:37:41.730 DEBUG Plugin.debugLog: ++++++++++++++
2023-07-30 12:38:05.727 DEBUG Plugin.debugLog: b'\t\x19\x06\x1a\xe3{}\xc1\x00\x80' (processing)
2023-07-30 12:38:05.729 DEBUG Plugin.debugLog: processPacket: Data: b'\t\x19\x06\x1a\xe3{}\xc1\x00\x80' and type <class 'bytes'>
2023-07-30 12:38:05.729 DEBUG Plugin.debugLog: Blinds Remote with id1-3 2282425 and unitcode 193 command 0 received
2023-07-30 12:38:05.729 DEBUG Plugin.debugLog: Blinds Remote with subtype 6 and sensor 228242693 received
2023-07-30 12:38:05.729 DEBUG Plugin.debugLog: Enter the below into Device Details: HouseCode (hex):E37B7D, Subtype (int):6& UnitCode (int):193
2023-07-30 12:38:05.729 DEBUG Plugin.debugLog: b'\t\x19\x06\x1a\xe3{}\xc1\x00\x80' SensorId2: 6, and sensorid type: <class 'bytes'>
2023-07-30 12:38:05.730 ERROR Plugin.errorLog: Unknown device detected (type = 25). Select a BlindsT1234 Device from the list of devices
2023-07-30 12:38:05.730 ERROR Plugin.errorLog: HouseCode (hex)=E37B7D ,subtype (int)=6 ,unitCode (int)=193
2023-07-30 12:38:05.730 DEBUG Plugin.debugLog: ++++++++++++++
2023-07-30 12:38:09.803 DEBUG Plugin.debugLog: b'\t\x19\x06\x1b\xe3{}\xc1\x00\x80' (processing)
2023-07-30 12:38:09.803 DEBUG Plugin.debugLog: processPacket: Data: b'\t\x19\x06\x1b\xe3{}\xc1\x00\x80' and type <class 'bytes'>
2023-07-30 12:38:09.803 DEBUG Plugin.debugLog: Blinds Remote with id1-3 2282425 and unitcode 193 command 0 received
2023-07-30 12:38:09.804 DEBUG Plugin.debugLog: Blinds Remote with subtype 6 and sensor 228242693 received
2023-07-30 12:38:09.804 DEBUG Plugin.debugLog: Enter the below into Device Details: HouseCode (hex):E37B7D, Subtype (int):6& UnitCode (int):193
2023-07-30 12:38:09.804 DEBUG Plugin.debugLog: b'\t\x19\x06\x1b\xe3{}\xc1\x00\x80' SensorId2: 6, and sensorid type: <class 'bytes'>
2023-07-30 12:38:09.804 ERROR Plugin.errorLog: Unknown device detected (type = 25). Select a BlindsT1234 Device from the list of devices
2023-07-30 12:38:09.804 ERROR Plugin.errorLog: HouseCode (hex)=E37B7D ,subtype (int)=6 ,unitCode (int)=193
2023-07-30 12:38:09.804 DEBUG Plugin.debugLog: ++++++++++++++
I suspect the problem is coming from the awning wind sensor, which is separate from the awning and presumably simulates a remote control device to retract the awning when it's windy, but I can't see how to stop the error messages.
Any suggestions would be appreciated!