- Posted on
Fri Apr 02, 2021 4:15 pm
-
Gman34798
offline
-
- Posts: 73
- Joined: Jun 10, 2018
Thanks for your reply Joe,
Yes, that is correct, functionality is there, but the status never changes and shows Locked status.
Here is the MyQ logging, I opened the door via Indigo at 06:06:25.
It appears that it is unable to get the status code for some odd reason.
It also appears that the last status update was back in December??
Apr 2, 2021 at 6:04:24 PM
Z-Wave received "Outdoor Motion Sensor" status update is on
Z-Wave received "HVAC Exit Air Temperature" temperature update to 76.6 °F
MyQ Warning getDevices failure, status_code = 400
Apr 2, 2021 at 6:05:53 PM
MyQ Debug logLevel = 10
MyQ Debug myqLogin response = {"SecurityToken":"ac862af4-6fc1-4a63-8e0d-82804af18809"}
MyQ Debug myqLogin successful
MyQ Debug logLevel = 10
MyQ Debug statusFrequency = 600.0
MyQ Debug myqLogin response = {"SecurityToken":"a80afef3-3959-4425-9644-c83d069b7046"}
MyQ Debug myqLogin successful
MyQ Warning getDevices failure, status_code = 400
Apr 2, 2021 at 6:06:25 PM
MyQ Debug actionControlDevice: Unlock Garage Door
MyQ Debug myqLogin response = {"SecurityToken":"35980adc-1267-4cfd-a663-ec0cb966d55f"}
MyQ Debug myqLogin successful
MyQ Debug Garage Door: changeDevice: new state = open
MyQ Debug myqLogin response = {"SecurityToken":"f9636ad0-0a80-43c5-a733-a4ea89cc280e"}
MyQ Debug myqLogin successful
MyQ Warning getDevices failure, status_code = 400
- Attachments
-
- Screen Shot 2021-04-02 at 6.08.36 PM.png (55.04 KiB) Viewed 4551 times
-
- Screen Shot 2021-04-02 at 6.08.29 PM.png (49.79 KiB) Viewed 4551 times