I just upgraded from 2.1.2 which was working fine, to the new version which now leverages the "indigo.sensor" type and wanted the degree symbol so I don't have to manipulate temp strings. I thought it would add F or C - but it just adds degree. F/C would be awesome!
Unfortunately when I fired it up, I get two identical errors every time an Oregon Scientific sensor broadcasts.
What I'm not 100% sure of, is whether this is RFXCOM plugin or something Indigo related. I tried editing/refreshing sensors. Doesn't seem to help.
I rebuilt one of my many sensors, and it doesn't seem to complain anymore. It actually complained with a burst of 4, but once I finished creating it, it seems OK now.
Any idea? Hopefully the expectation is not to have to recreate all RFXCOM temp devices as that hoses all the triggers/actions etc. Does my RFXtrx need an update? I was going to soon, but now wonder. Thanks!
Here are some log snippets, hopefully this helps;
- Code: Select all
RFXCOM initializing communication on port /dev/cu.usbserial-03VHDCBN at speed 38400
RFXCOM connected to RFXtrx 433.92 MHz, firmware version 190
RFXCOM currently enabled receiver protocols: Oregon Scientific
Error device "OS Sensor - Front Bedroom" state key sensorValue not defined (ignoring update request)
Error device "OS Sensor - Front Bedroom" state key sensorValue not defined (ignoring update request)
Error device "OS Sensor - Master Bedroom" state key sensorValue not defined (ignoring update request)
Error device "OS Sensor - Master Bedroom" state key sensorValue not defined (ignoring update request)
And with DEBUG turned on, some samples;
- Code: Select all
RFXCOM Debug PIC INIT IS: none
RFXCOM Debug send init cmd: 13 0 0 1 2 0 0 0 0 0 0 0 0 0 (0D 00 00 01 02 00 00 00 00 00 00 00 00 00)
RFXCOM Debug rcvd init reply: 13 1 0 1 2 83 190 0 0 32 0 1 0 28 (0D 01 00 01 02 53 BE 00 00 20 00 01 00 1C)
RFXCOM connected to RFXtrx 433.92 MHz, firmware version 190
RFXCOM currently enabled receiver protocols: Oregon Scientific
RFXCOM Debug processing: 10 82 1 0 236 1 128 23 44 0 89 (0A 52 01 00 EC 01 80 17 2C 00 59)
RFXCOM Debug Temp sensor 492 now -2.30 degrees and 44 humidity.
RFXCOM Debug Temp sensor 492 in list
RFXCOM Debug UpdateMinMax state temperature value -2.3
RFXCOM Debug check if new day: last date 2018/02/06, new date 2018/02/06
RFXCOM Debug UpdateMinMax state humidity value 44
RFXCOM Debug check if new day: last date 2018/02/06, new date 2018/02/06
Error device "OS Sensor - Garage" state key sensorValue not defined (ignoring update request)
Error device "OS Sensor - Garage" state key sensorValue not defined (ignoring update request)
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 10 82 1 1 87 4 0 189 33 2 105 (0A 52 01 01 57 04 00 BD 21 02 69)
RFXCOM Debug Temp sensor 1111 now 18.90 degrees and 33 humidity.
RFXCOM Debug Temp sensor 1111 in list
RFXCOM Debug UpdateMinMax state temperature value 18.9
RFXCOM Debug check if new day: last date 2018/02/06, new date 2018/02/06
RFXCOM Debug UpdateMinMax state humidity value 33
RFXCOM Debug check if new day: last date 2018/02/06, new date 2018/02/06
Error device "OS Sensor - Office" state key sensorValue not defined (ignoring update request)
Error device "OS Sensor - Office" state key sensorValue not defined (ignoring update request)
RFXCOM Debug ++++++++++++++
- Code: Select all
RFXCOM Debug <<-- entering deviceStartComm: OS Sensor - Master Bedroom (1854670858 - Temperature)
RFXCOM Debug deviceStart called. Adding device OS Sensor - Master Bedroom, type: Temperature
RFXCOM Debug Adding sensor 288.
RFXCOM Debug Updating plugin props, Sensor 288
RFXCOM Debug <<-- entering deviceStartComm: OS Sensor - Office (1335542212 - Temperature)
RFXCOM Debug deviceStart called. Adding device OS Sensor - Office, type: Temperature
RFXCOM Debug Adding sensor 1111.
RFXCOM Debug Updating plugin props, Sensor 1111