Thanks Jay.
I do have another question, not sure if it is related or not.
I have the insteon fanlinc. However until now, I have only been able to turn the fan and light on/off using Indigo, because I don't have any physical switch associated with it.
So I bought the 6-key insteon keypad. I am trying to set it up to control the fanlinc. But no matter what I do, I cannot find a "clean" way of connecting them so that when I use the switch, indigo will know.
I did find a way to update the switch when I use indigo to control the fanlinc. I just made some triggers to turn on/off the appropriate buttons.
However, when using the switch, sometimes it works, but there is a very long delay. I am also seeing errors in the indigo log:
Here is an example of the errors. Also, I should point out that lately (past month or so), I have been getting alerts the the "insteon interface" connection has been restored. I have alerts set up to tell me when an interface goes down/up. Seems like it is crashing a lot. Happens about once or twice per day.
- Code: Select all
Received INSTEON "Veranda Switch" on (button 4)
Trigger Veranda Fan Medium via Switch
Z-Wave received "Motion - Upstairs" status update is off
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
Sent INSTEON "Veranda - Fan" status request (received: medium)
Trigger Veranda Fan Medium via Fan
Error resending previous command (reply mismatch)
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
Error resending previous command (busy or unexpected command)
PowerLinc Unexpected command 02 62 (flushing)
Error "Veranda Switch" raw insteon command; send failed (no acknowledgment)
INSTEON Commands Error Failed to get current LED states for device 1796299582 - aborting