Monstergerm wrote:I checked the code and it is fairly simple to incorporate the feature that a disarm code is sent when required.
However, it is puzzling to me why you do not see the bypass state correctly for zones in partition 1. When you issue the command on theDSC keypad (and enter the disarm code), does the plugin report back "Alarm Zone XYZ Bypassed?
Can you turn debugging on and send me the debug log after a bypass command has been issued.
With intense debugging on, there is no reporting of what Zone has been bypassed. This is an edited version from when the LEDBypass was off and changed to on. (I deleted non DSC debugging and in this case, I bypassed zone 7).
(The trouble led is because the antitheft contact behind the DSC panel moves because the wall is weak. It is on the list of jobs)
DSC Alarm Debug Partition 1 Ready
DSC Alarm Debug Updating state ReadyState for keypad on partition 1 to ready.
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to on.
DSC Alarm Debug RX: 60900433
DSC Alarm Debug Zone Number 4 Open.
DSC Alarm Alarm Zone 'M-L1 Entertainment' Opened.
DSC Alarm Debug RX: 51090FF
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDTrouble for keypad on partition 1 to on.
DSC Alarm Debug Updating state LEDMemory for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDBypass for keypad on partition 1 to off.
DSC Alarm Debug RX: 6511CD
DSC Alarm Debug Partition 1 Not Ready
DSC Alarm Debug Updating state ReadyState for keypad on partition 1 to notready.
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to off.
DSC Alarm Debug RX: 51080FE
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDTrouble for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDMemory for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDBypass for keypad on partition 1 to off.
DSC Alarm Debug RX: 51108FF
DSC Alarm Debug RX: 6100042B
DSC Alarm Debug Zone Number 4 Closed.
DSC Alarm Alarm Zone 'M-L1 Entertainment' Closed.
DSC Alarm Debug RX: 51100F7
DSC Alarm Debug RX: 5109908
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to on.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDTrouble for keypad on partition 1 to on.
DSC Alarm Debug Updating state LEDMemory for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDBypass for keypad on partition 1 to on.
DSC Alarm Debug RX: 6501CC
DSC Alarm Debug Partition 1 Ready
DSC Alarm Debug Updating state ReadyState for keypad on partition 1 to ready.