- Posted on
Fri Apr 12, 2024 3:51 pm
-
Radjin
offline
-
- Posts: 151
- Joined: May 13, 2015
If I have a problematic Insteon switch, I usually have indigo send the command twice and it works. For my z-wave units, if it fails once, sending an extra command does no good; in that case the only fix seems to be to move the switch closer to the server or swap it out with an Insteon equivalent. Finding what causes interference is such a pain. I have four Insteon switches that work at my main gate some 600’ away, and then have a switch that will be flaky two rooms away. I have figured out that in all cases, dimmers are the most problematic with either z-wave or Insteon.
It's not rocket science...