Hide energy status updates

Would it be possible to have the checkbox for hiding energy status updates in the log for all devices reporting consumption? Now this can only be done for some devices.

Thanks!

[matt (support)]

Can you list the specific models (as shown in the edit settings dialog) that need the checkbox? It is easier at this point to add them individually than globally.

Right now I have these that would need the checkbox:

"Flush Micro Dimmer (ZMNHDD)"
"Relay Power Switch" (from Everspring, maybe this is a generic device?)

I am about to install Qubino Flush Relay's too which I guess behaves like the Qubino dimmer above. I can't see the device model in Indigo before I have included it, but they should be named something like ZMNHAD1 and ZMNHBD1 I guess.

Thanks!

[matt (support)]

For the Everspring module define/sync it and copy/paste the results. And let me know what specific model it is.

It is a Everspring mini Plug AN181

Z-Wave Syncing - started for "Diskmaskin"
Z-Wave Syncing - retrieved module neighbors list: 5, 12, 14, 18, 52, 54, 58, 65, 66, 67, 68, 69, 70, 71, 74, 75, 76, 79
Z-Wave Syncing - assigning return route to "059 - Diskmaskin"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Everspring - 0060, Relay Power Switch - 00040006
Z-Wave Syncing - retrieved protocol version 3.95, app version 1.00
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Relay Switch : Relay Power Switch (04 : 10 : 01, base 25)
Z-Wave Syncing - retrieved command classes: 20v1 22v1 85v1 86v1 27v1 72v1 70v1 71v1 32v3 73v1 59v1 5Av1 7Av1 5Ev1 25v1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, beaming
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - complete

@lochnesz:

If you don't need to log energy data for those devices then for the ZMNHDDx (and other Qubino devices as well) just disable power reporting by setting device params 40 and 42 to zero.

If you don't need to log energy data for those devices then for the ZMNHDDx (and other Qubino devices as well) just disable power reporting by setting device params 40 and 42 to zero.

I do want the energy reporting, just not in the log.