camera URL image errors

I've got two generic MJPG cameras from different manufacturers.

Both can and do serve a raw image in a web page.

Trying to add them to a control page, I get these errors:

WebServer http://192.168.0.34/live returned type multipart/x-mixed-replace; boundary=myboundary (image required)
WebServer http://192.168.0.35/mjpg/video.mjpg returned type multipart/x-mixed-replace; boundary=--myboundary (image required)

Neither camera has authentication turned on. I supplied the control page with same url that works in a browser window.

I have a Foscam C1 that properly displays in the same control page.

Searched the forums, but I couldn't find general requirements for this, just lots of help for specific cameras. I'm particularly puzzled by the second one, as that's a very high end AMX camera that is rock solid.

WebServer http://192.168.0.34/live returned type multipart/x-mixed-replace; boundary=myboundary (image required)
WebServer http://192.168.0.35/mjpg/video.mjpg returned type multipart/x-mixed-replace; boundary=--myboundary (image required)

I know nothing about those particular cameras, but those URLs look like a live MPEG stream which is basically a continuous stream of MPEG images IIRC. My cameras can do that, but I don't believe that Indigo will understand that as they are expecting a static image returned. What you want to do is find the URL for a snapshot from your cameras and use that instead... I found my camera's URLs pretty easily on the web.

Adam

Hi

I use the http://www.ispyconnect.com/sources.aspx to find the URL of different cameras

Search for your brand and model mayby they have the URL ypu need to get jpg still image

(Use the one where type = JPG)

/Martin