- Posted on
Thu Dec 10, 2015 8:52 pm
-
P15-D24
offline
-
- Posts: 108
- Joined: Jun 25, 2005
- Location: Santa Barbara, CA
-
Event log:
//Control page on, then off. LED button not set to off//
Dec 10, 2015, 6:43:09 PM
WebServer request to execute "Tester1" control #3 from 10.0.1.195
Sent INSTEON "PowerLinc Interface" on (scene 1 - Test Scene)
WebServer request to execute "Tester1" control #1 from 10.0.1.195
Sent INSTEON "PowerLinc Interface" off (scene 2)
//Control page on, then off from Action Group page via Execute All of selected Action Group Name (tester to scene off) LED button correctly set to off.//
Dec 10, 2015, 6:44:34 PM
WebServer request to execute "Tester1" control #3 from 10.0.1.195
Sent INSTEON "PowerLinc Interface" on (scene 1 - Test Scene)
Action Group Tester to scene off
Sent INSTEON "PowerLinc Interface" off (scene 2)
Sent INSTEON "Family Room Controller" raw insteon command (2E 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00; ack: 00)
Sent INSTEON "Family Room Controller" raw insteon command (2E 00 00 09 C0 00 00 00 00 00 00 00 00 00 00 00; ack: 00)
Run it 5-6 time, behavior consistently repeats.
Running OS X 12.2.1 on 2018 Mac Mini, Indigo 2022.2
http://www.p15-d24.com