Going through a remodel and using Zooz dimmer switches in 3 and 4-way configurations. I would like to use 2 or more Zooz dimmers to control a single set of lights, so all switches look and behave the same. Zooz has documentation for doing this, but I cannot figure out how to configure this setup in Indigo. Ideally, I could configure “direct association”, where the dimmers communicate outside of Indigo, but Indigo is aware of what’s going on.
https://www.support.getzooz.com/kb/arti ... lar-bulbs/
Any advise on how to do this would be much appreciated. Thanks!