Aeon Labs Doorbell Gen5

Posted on
Wed Nov 15, 2017 4:17 am
rodb offline
Posts: 3
Joined: Nov 10, 2017

Aeon Labs Doorbell Gen5

I would like to use this device to respond with different sounds to different triggers.

Parameter #2 Set the repetitions for playing doorbell ringtone. Value=1 to 255.
Parameter #6 Select a ringtone to play. Value=1‐100, play the specified ringtone.
Parameter #8 Set the volume of ringtone. Value=0‐10.

Is this ever going to be supported in the GUI? If not, how can I use this device's features with Indigo?

Posted on
Wed Nov 15, 2017 6:38 am
matt (support) offline
Site Admin
User avatar
Posts: 18070
Joined: Jan 27, 2003
Location: Texas

Re: Aeon Labs Doorbell Gen5

Indigo has had the UI settings for those parameters over a year now (7.0.0). You can access them via an Action by choose the Z-Wave action type Modify Configuration Parameter.

If you aren't seeing them (in that action type or the device settings dialog) then resync the module and copy/paste the Event Log results into a forum reply.

Image

Posted on
Wed Nov 15, 2017 2:33 pm
rodb offline
Posts: 3
Joined: Nov 10, 2017

Re: Aeon Labs Doorbell Gen5

Works perfect when you know what you are doing. They were there. I just didn't know where to look. Thanks.

Page 1 of 1

Who is online

Users browsing this forum: Different Computers and 1 guest