DHS Motion Sensor Error (onOffState not defined)

Hi, I am having trouble getting a DHS Motion Sensor to work ... see log file below ... any ideas?


9 Dec 2015 4:44:01 am
Z-Wave Indigo Device "Entry - Sensor" Z-Wave Properties:
Indigo Z-Wave Version: 1.0.355
Node ID: 12
Model: Binary Sensor
Model ID: 11805501
Manufacturer: Digital Home Systems
Manufacturer ID: 0097
Protocol Version: 2.97
Application Version: 0.64
Model Definition Version: 0
Library Type: 6
Class Name: Binary Sensor
Class Hierarchy: 04 : 20 : 00
Command Class Base: 31
Command Versions: 20v1 80v1 84v1 85v1 86v1 71v1 70v1 60v2 30v1 31v1 72v1
Multi-Endpoint Types: 1:(21 : 00), 2:(21 : 00)
Multi-Endpoint Classes: 1:[31], 2:[31]
Multi-Instance Counts: - none -
Features: routing, battery, beaming, waking
Neighbors: 3
Associations: 1:[1]
Config Values: - none -
Z-Wave received "Entry - Sensor" status update is on
Error device "Entry - Sensor" state key onOffState not defined (ignoring update request)
Error device "Entry - Sensor" state key onOffState not defined (ignoring update request)
Z-Wave received "Entry - Sensor" status update is on
Error device "Entry - Sensor" state key onOffState not defined (ignoring update request)
Error device "Entry - Sensor" state key onOffState not defined (ignoring update request)

9 Dec 2015 4:44:36 am
Z-Wave received "Entry - Sensor" status update is off
Error device "Entry - Sensor" state key onOffState not defined (ignoring update request)
Error device "Entry - Sensor" state key onOffState not defined (ignoring update request)
Z-Wave received "Entry - Sensor" status update is off
Error device "Entry - Sensor" state key onOffState not defined (ignoring update request)
Error device "Entry - Sensor" state key onOffState not defined (ignoring update request)

[jay (support)]

Did you just recently create the device in Indigo or is this one you've had for a while? Try deleting the device in Indigo then recreating it.

Hi Jay ... This sensor is a new addition.

I deleted the device, then created/synced it again for same result ... what am I doing wrong?

11 Dec 2015 6:30:15 am
Z-Wave Syncing - started for device "012 - Binary Sensor"
Z-Wave Syncing - retrieved module neighbors list: 3
Z-Wave Syncing - requesting neighbor list update of "012 - Binary Sensor"
Z-Wave Syncing - neighbor list update complete (no change)
Z-Wave Syncing - assigning return route to "012 - Binary Sensor"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Digital Home Systems - 0097, Binary Sensor - 11805501
Z-Wave Syncing - retrieved protocol version 2.97, app version 0.64
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Binary Sensor : -- (04 : 20 : 00, base 30)
Z-Wave Syncing - retrieved command classes: 20v1 80v1 84v1 85v1 86v1 71v1 70v1 60v2 30v1 31v1 72v1
Z-Wave Syncing - retrieved wake interval of 60 minutes
Z-Wave Syncing - device "012 - Binary Sensor" wake interval changed to 60 minutes
Z-Wave Syncing - retrieved multi-endpoint types: 1:(21 : 00), 2:(21 : 00)
Z-Wave Syncing - retrieved multi-endpoint classes: 1:[31], 2:[31]
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - retrieved battery level of 100%
Z-Wave Syncing - created device "012 - Multilevel Sensor"
Z-Wave Syncing - created device "012 - Multilevel Sensor 2"
Z-Wave Syncing - complete
Z-Wave sent "012 - Multilevel Sensor" status request
Z-Wave sent "012 - Multilevel Sensor 2" status request
Z-Wave received "012 - Multilevel Sensor" status update battery level 100%
Z-Wave received "012 - Multilevel Sensor 2" sensor update to 57%
Z-Wave received "012 - Multilevel Sensor 2" units changed to %

11 Dec 2015 6:31:18 am
Z-Wave received "012 - Multilevel Sensor" status update battery level 100%

11 Dec 2015 6:31:35 am
Z-Wave received "012 - Multilevel Sensor" status update is on
Error device "012 - Multilevel Sensor" state key onOffState not defined (ignoring update request)
Error device "012 - Multilevel Sensor" state key onOffState not defined (ignoring update request)
Z-Wave received "012 - Multilevel Sensor" status update is on
Error device "012 - Multilevel Sensor" state key onOffState not defined (ignoring update request)
Error device "012 - Multilevel Sensor" state key onOffState not defined (ignoring update request)

[matt (support)]

Indigo doesn't have a device definition for that sensor yet, but does support the DHS MultiSensor model DHS-ZW-SNMT-01.

What is the model number of the particular sensor you have, and what capabilities does it have? The one Indigo supports has motion, temperature, and luminance sensors.

Device info below:


Cat No. DHS-SNS-MS-DHS

The DHS Z-Wave Multi-Sensor is a smart, battery-powered Motion/Temperature/Luminosity sensor. This device is capable of sending Z-Wave commands to any associated Z-Wave devices within its Z-Wave network when someone moves inside a room or the Temperature/Luminosity changes.

[matt (support)]

It looks like this one matches the existing device profile we have so we will add support for it to the next Indigo 6.1 dot release.

Thanks Matt, much appreciated.

[matt (support)]

I've added the new device definition for this multi sensor to v6.1.5 (now available).

[matt (support)]

Please get the just-released Indigo 6.1.6 installer. There was an issue in 6.1.5 which might effect this change.

Working great now ... thank you very much!