Moving on and up from 2413U, X10

Posted on
Mon Apr 24, 2017 8:23 am
steve-j offline
Posts: 1
Joined: Apr 23, 2017

Moving on and up from 2413U, X10

I've had an X10 setup for years and it's probably time to move on (spurred in part by another 2413U dying on m e). I don't envision swapping every X10 module for something new, so ideally I'd like to switch to a hub that will handle X10 as well as... something. And it's that "something" that I would very much like to get advice on (well, that and which hub, of course). What would be a good upgrade path, what devices/protocols would make sense to move on to?

All advice welcome. Thanks in advance!

Posted on
Wed Apr 26, 2017 9:46 am
jay (support) offline
Site Admin
User avatar
Posts: 18200
Joined: Mar 19, 2008
Location: Austin, Texas

Re: Moving on and up from 2413U, X10

Lots of options. Keep the 2413U and you can use both X10 and Insteon so the transition can be slower. We have seen some 2413Us that for whatever reason the X10 functionality fails, so that's a potential risk. You can get a CM15A to handle your X10 stuff and then use Z-Wave as your "new" technology if you don't want to do Insteon. Or you can use any of the almost 200 plugins that add support for a bunch of other things depending on what you want to replace.

Jay (Indigo Support)
Twitter | Facebook | LinkedIn

Page 1 of 1

Who is online

Users browsing this forum: No registered users and 3 guests