I moved my install to a new mac and followed the guide posted here: http://wiki.indigodomo.com/doku.php?id=indigo_6_documentation:getting_started#moving_an_indigo_6_installation_to_another_mac
The only difference is I was running 10.8.5 and now I'm running 10.9.3.
The PowerLinc 2413U is working fine but the Aeon Labs Z-Stick... not so much (I didn't install a separate driver for either device BTW).
I can post the whole log bit but to sum it up:
Jun 5, 2014, 4:18:49 PM
Enabling interface "Z-Wave 1.0.232"
Starting interface "Z-Wave 1.0.232" (pid 918)
Started interface "Z-Wave 1.0.232"
Z-Wave Error rcvd unexpected bytes (sent ACK): 5B 31 30
30 30 30 30 30 31 31 30 30 30 30 30 30 30 2D 2D 2D 2D 5D 2C 30 30 38 2C 5B 66
37 30 32 30 30 66 66 31 30 30 38 30 30 31 63 32 38 30 32 30 30 30 30 30 30 30
30 30 30 5D 2C 22 20 44 49 53 41 52 4D 45 44 20 43 48 49 4D 45 20 20 20 52 65
61 64 79 20 74 6F 20 41 72 6D 20 20 22 0D 0A
Z-Wave Error rcvd unexpected bytes (sent ACK): 5B 31 30
30 30 30 30 30 31 31 30 30 30 30 30 30 30 2D 2D 2D 2D 5D 2C 30 30 38 2C 5B 66
37 30 32 30 30 66 66 31 30 30 38 30 30 31 63 32 38 30 32 30 30 30 30 30 30 30
30 30 30 5D 2C 22 20 44 49 53 41 52 4D 45 44 20 43 48 49 4D 45 20 20 20 52 65
61 64 79 20 74 6F 20 41 72 6D 20 20 22 0D 0A
Z-Wave Error rcvd unexpected bytes (sent ACK): 5B 31 30
30 30 30 30 30 31 31 30 30 30 30 30 30 30 2D 2D 2D 2D 5D 2C 30 30 38 2C 5B 66
37 30 32 30 30 66 66 31 30 30 38 30 30 31 63 32 38 30 32 30 30 30 30 30 30 30
30 30 30 5D 2C 22 20 44 49 53 41 52 4D 45 44 20 43 48 49 4D 45 20 20 20 52 65
61 64 79 20 74 6F 20 41 72 6D 20 20 22 0D 0A
Z-Wave Debug stopped zwave packet parser thread
Z-Wave connection reset requested
Z-Wave Debug starting serial connection loop
Z-Wave Debug starting zwave packet parser thread
Z-Wave Debug SENT getVersion: 01 03 00 15 E9
Z-Wave Error rcvd unexpected bytes (sent ACK): 5B 31 30
Thanks for any help!