- Code: Select all
Mar 25, 2018 at 4:48:35 PM
Disabling plugin "Pushover 1.4.0"
Stopping plugin "Pushover 1.4.0" (pid 88353)
Pushover Debug shutdown called
Stopped plugin "Pushover 1.4.0"
Disabling plugin "Pushsafer 1.1.2"
Stopping plugin "Pushsafer 1.1.2" (pid 88354)
Pushsafer Debug Pushsafer shutdown
Stopped plugin "Pushsafer 1.1.2"
Enabling interface "INSTEON Commands 2.0.10"
Starting interface "INSTEON Commands 2.0.10" (pid 88358)
Error Install Interface() caught exception: InvalidParameterError -- serial port name not specified
Interface Failure failed to establish connection with serial interface
Started interface "INSTEON Commands 2.0.10"
Disabling interface "INSTEON Commands 2.0.10"
Stopping interface "INSTEON Commands 2.0.10" (pid 88358)
Stopped interface "INSTEON Commands 2.0.10"
I did not try to enable the interface. It did it on it's own. I happened to be looking at the log at the time (working on the Pushsafer plugin), so I immediately turned it off.
Meanwhile on the production server (Mac mini), I see this:
- Code: Select all
2018-03-25 01:03:37.221 Received INSTEON "Leak Sensor - Washing Machine" on (heartbeat)
2018-03-25 03:27:07.340 Received INSTEON "Leak Sensor - Ice Maker" on (heartbeat)
2018-03-25 07:17:17.607 Received INSTEON "Pantry Door Sensor" on (heartbeat)
2018-03-25 08:11:48.663 Application Connected to PowerLinc 2413U interface on port usbserial-A6028NKV
2018-03-25 08:11:48.665 Application PowerLinc address 2A.01.3F, firmware version 9.11
So, the system is merrily chugging along, getting Insteon messages just fine, when all of a sudden the interface disables itself. I turned it back on at 8:11 when I checked the system.
WTF?