- Code: Select all
Jul 17, 2017, 10:23:15 AM
Received INSTEON 14.8E.97 on (button 1)
I tried several factory reset on the 2421 without success !
How I can flush it from the powerlinc ?
Any clue?
Jul 17, 2017, 10:23:15 AM
Received INSTEON 14.8E.97 on (button 1)
Jul 17, 2017, 12:08:35 PM
PowerLinc Linking - entered discovery linking mode (240 seconds)
Jul 17, 2017, 12:09:17 PM
PowerLinc Linking - syncing PowerLinc links (address 20.F4.B4)
PowerLinc Linking - . . adding: INSTEON plc link to controller 14.8E.97, flags 03, group 01, data 00 00 FF
PowerLinc Linking - . . adding: (not added -- probably already exists)
PowerLinc Linking - sync complete
PowerLinc Linking - PowerLinc links updated
PowerLinc Linking - sending engine version request to 14.8E.97
PowerLinc Linking - no response from device
PowerLinc Linking - sending engine version request to 14.8E.97
PowerLinc Linking - no response from device
PowerLinc Linking - sending engine version request to 14.8E.97
PowerLinc Linking - no response from device
PowerLinc Linking - sending engine version request to 14.8E.97
PowerLinc Linking - no response from device
PowerLinc Linking - sending engine version request to 14.8E.97
PowerLinc Linking - no response from device
PowerLinc Linking - sending engine version request to 14.8E.97
PowerLinc Linking - received engine version 01 from 14.8E.97
PowerLinc Linking - sending id request for device information to 14.8E.97
PowerLinc Linking - no response from device
PowerLinc Linking - sending id request for device information to 14.8E.97
PowerLinc Linking - no response from device
PowerLinc Linking - sending id request for device information to 14.8E.97
PowerLinc Linking - no response from device
PowerLinc Linking - sending id request for device information to 14.8E.97
PowerLinc Linking - no response from device
PowerLinc Linking - sending id request for device information to 14.8E.97
PowerLinc Linking - no response from device
PowerLinc Linking - sending id request for device information to 14.8E.97
Received INSTEON 14.8E.97 on (button 2)
PowerLinc Linking - received id request response from 14.8E.97
PowerLinc Linking - no response from device
PowerLinc Linking - initializing remote device "new device 2" (address 14.8E.97, firmware version 28)
Jul 17, 2017, 12:11:12 PM
Received INSTEON 14.8E.97 off (button 2)
Jul 17, 2017, 12:11:29 PM
Received INSTEON 14.8E.97 on (button 2)
Jul 17, 2017, 12:12:23 PM
PowerLinc Linking - initialize complete
PowerLinc Linking - syncing remote device "new device 2" (address 14.8E.97, firmware version 28)
Jul 17, 2017, 12:12:57 PM
Received INSTEON 14.8E.97 on (button 2)
Received INSTEON "Motion Garage Ouside" on (button 1)
Jul 17, 2017, 12:13:45 PM
PowerLinc Linking - syncing all links
Jul 17, 2017, 12:14:03 PM
Received INSTEON "Motion Garage Ouside" off (button 1)
Jul 17, 2017, 12:14:44 PM
Error failed to fetch data from remote module
Error Linking - syncing failed; remote device might be asleep
Error linking failed
PowerLinc Linking - entered discovery linking mode (240 seconds)
Jul 17, 2017, 12:15:48 PM
Received INSTEON 14.8E.97 on (button 1)
Jul 17, 2017, 12:16:08 PM
PowerLinc Linking - exited linking mode
Users browsing this forum: No registered users and 7 guests