Neo Coolcam SOS Key Fob

I recently decided to purchase another of the Neo Z-wave devices, http://www.szneo.com/en/products/show.php?id=195. I've submitted the device details in the normal way. Below is the log entry:

Code: Select all

   Z-Wave                          Indigo Device "094 - Notification Sensor" Z-Wave Properties:
Indigo Z-Wave Version: 2.0.111
Node ID: 94
Model: Notification Sensor
Model ID: 0003108A
Manufacturer: Neo
Manufacturer ID: 0258
Protocol Version: 4.38
Application Version: 3.11
Model Definition Version: 0
Library Type: 6
Class Name: Notification Sensor
Class Hierarchy: 04 : 07 : 01
Command Class Base: 00
Command Versions: 20v1 80v1 84v2 85v1 86v1 70v1 30v1 71v1 72v1 73v1 59v1 5Av1 5Bv1 5Ev1
Encryption Status: Not Supported
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: routing, battery, beaming, waking
Neighbors: 43, 45, 46, 82
Associations: 1:[1] 2:[] 3:[] 4:[] 5:[]
Config Values: - none -


I've managed to get the buttons to trigger from a raw command as an interim measure until a new device definition is created - no panic .

[matt (support)]

Can you turn on Indigo's Z-Wave debug logging checkbox (via the Interfaces->Z-Wave->Configure... menu item) and capture the Event Log results of all the different button presses for us?

Button 1

Code: Select all

   Z-Wave Debug                    RCVD sceneActivateCmd2: 01 0B 00 04 00 5E 05 5B 03 00 00 01 F2
   Z-Wave Debug                    . .  sceneActivateCmd2: node 094, type: 0, scene: 1
   Z-Wave                          received "094 - Notification Sensor" scene 1


Button 2

Code: Select all

   Z-Wave Debug                    RCVD sceneActivateCmd2: 01 0B 00 04 00 5E 05 5B 03 00 00 02 F1
   Z-Wave Debug                    . .  sceneActivateCmd2: node 094, type: 0, scene: 2
   Z-Wave                          received "094 - Notification Sensor" scene 2


Button 3

Code: Select all

   Z-Wave Debug                    RCVD sceneActivateCmd2: 01 0B 00 04 00 5E 05 5B 03 00 00 03 F0
   Z-Wave Debug                    . .  sceneActivateCmd2: node 094, type: 0, scene: 3
   Z-Wave                          received "094 - Notification Sensor" scene 3


SOS

Code: Select all

   Z-Wave Debug                    RCVD requestAlarmSensorStatus: 01 0F 00 04 00 5E 09 71 05 00 00 00 FF 0A 01 00 23
   Z-Wave Debug                    . .  requestAlarmSensorStatus: node 094, endpoint None, cmdClass 71, type 0, value 0, classSubKey 710000
   Z-Wave Debug                    . .  requestAlarmSensorStatus: typeExt 10, valueExt 1, classSubKeyExt 7100000A01
   Z-Wave Debug                    RCVD requestBinarySensorStatus: 01 0A 00 04 00 5E 04 30 03 FF 01 66
   Z-Wave Debug                    . .  requestBinarySensorStatus: node 094, endpoint None, type 1, value 255


That should work out of the box with the Zwave Scene Controller Plugin if anyone else buys one before the device definition is published.

Peter


Sent from my iPhone using Tapatalk Pro

Will give that a try later.


Sent from my iPhone using Tapatalk

[matt (support)]

Indigo 7.5 is now available and includes support for scene Triggers from the Neo Coolcam SOS Key Fob (RC01Z).