Change Philio PST02-1A to report in Centigrade

How do I change the temperature measurement unit in this sensor? Anyone know? I can't see anything in the instruction sheet that accompanied it.

(PS I bought this while I wait for the guys to add a definition for the Zipato multisensor. I can confirm that the Zipato and the Philio appear to be exactly the same units.)

[matt (support)]

Inside the device settings for the module try changing the Operation Flags edit field to 16. Set to 0 to go back to °F.

Thanks Matt but I can't see any parameter called Opertation Flags. Here's what I can see when choosing "Edit Device Settings..."

Am I missing something?

[matt (support)]

Try scrolling that view in the window up a bit. The Operation Flags should be immediately after the Battery Interval.

If all else fails, you can always use the Adapters Plugin (http://forums.indigodomo.com/viewtopic.php?f=134&t=15793) to convert it yourself and then display the variable.

Inside the device settings for the module try changing the Operation Flags edit field to 16. Set to 0 to go back to °F.

On my 2 x PST02's I have them set to 8 for Centigrade, 16 gives me Farenheight.

30 Nov 2017, 12:26:21
Z-Wave device "113 - Kitchen PST02 Motion Sensor" parameter 5 "Operation flags" changed to 16

30 Nov 2017, 12:26:47
Z-Wave received ".Kitchen PST02 - NOT USED - Temperature" units changed to °F

30 Nov 2017, 13:27:40
Z-Wave device "113 - Kitchen PST02 Motion Sensor" parameter 5 "Operation flags" changed to 8

30 Nov 2017, 13:36:22
Z-Wave received ".Kitchen PST02 - NOT USED - Temperature" units changed to °C

Thanks folks. Just confirming that Clive's parameter is the one that did the trick. Reporting nicely in centigrade now.