Hi matt,
I have had this controller for a while now and have been using it with the ZWave Lock Manager plugin. It syncs but I do not get correct indication of the battery level or access to any other settings.
The manual is here https://www.digitalhomesystems.com.au/d ... n%20v1.pdf
Any chance of adding this to the list
The log output:
-Wave Syncing - started for "Alarm Keypad"
Z-Wave Syncing - retrieved module neighbors list: 3, 4, 5, 8, 28, 32, 45
Z-Wave Syncing - assigning return route to "052 - Alarm Keypad"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Digital Home Systems - 0097, Entry Control - 61315501
Z-Wave Syncing - retrieved protocol version 2.97, app version 0.28
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Entry Control : -- (04 : 40 : 00, base 00)
Z-Wave Syncing - retrieved command classes: 20v1 80v1 63v1 84v1 85v1 86v1 70v1 71v1 72v1 25v1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, battery, beaming, waking
Z-Wave Syncing - retrieved wake interval of 60 minutes
Z-Wave Syncing - device "052 - Alarm Keypad" wake interval changed to 60 minutes
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - retrieved battery level of 14%
Z-Wave Syncing - complete
Z-Wave Error device "Alarm Keypad" does not support status request command
Z-Wave received "052 - Alarm Keypad" status update battery level 5%