wideglidejrp wrote:My first Neo Coolcam PIR did not work because it was a European frequency model. I got a new one clearly labeled on box as 908.4MHZ US. I was able to install it and sync it, but it does not work. A status request fails. It shows state as OFF and battery at 95%. I notice in other posts a model number of NAS-PD02Z. Mine does show a model number on the device, on the box, or in the instruction sheet. The box says Neo Coolcam Motion sensor. Any ideas on how to diagnose this device?
Compare your details to a UK version. ( and put the data here so Matt can compare if the US version needs tweaking)
UK Details
- Code: Select all
Indigo Z-Wave Version: 2.0.111
Node ID: 120
Model: Door/Window Sensor
Model ID: 00031082
Manufacturer: Neo
Manufacturer ID: 0258
Protocol Version: 4.05
Application Version: 3.80
Model Definition Version: 1
Library Type: 6
Class Name: Routing Slave
Class Hierarchy: 04 : 56 : 68
Command Class Base: 00
Command Versions: 80v1 01v1 84v2 85v1 86v1 1Dv1 30v1 40v1 47v1 D3v1 54v1 D5v1 D6v1 59v1 5Av1 5Ev1 5Fv1 70v1 71v1 72v1 73v1 79v1 7Dv1 55v1
Encryption Status: Not Supported
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: routing, battery, beaming, waking
Neighbors: 103, 150, 151, 157
Associations: 1:[1] 2:[] 3:[] 4:[]
Config Values: - none -
The Australian version (sold by Black Cat in Oz) needed it's own definition tweaked by Matt and possibly the US version needs the same.
Dont expect the Lux to work, out of 8 only 2 of mine work.
I dont think my box's mentioned model number either.