Hi
I have two Aeonlabs Energy Monitor (Three clamp Zwave) And they are working perfectly.
So i bought a third, but i can't get it to sync properly. It starts but it do not finish?
Anyone know why this happens?
Z-Wave Syncing - started for "033 - Simple Meter"
Z-Wave Syncing - retrieved module neighbors list: 5, 7, 8, 12, 20, 29
Z-Wave Syncing - assigning return route to "033 - Simple Meter"
Z-Wave Syncing - assigned return route
Z-Wave received "Garderob" power load to 36.6 W
Z-Wave Syncing - retrieved manufacture and model names: Aeon Labs - 0086, Home Energy Monitor (ZW095) - 0002005F
Z-Wave Syncing - retrieved protocol version 4.34, app version 1.00
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Meter : Simple Meter (04 : 31 : 01, base 32)
Z-Wave Syncing - retrieved command classes: 20v1 60v3 85v1 86v1 72v1 8Ev1 70v1 32v4 73v1 56v1 59v1 7Av1 5Av1 5Ev1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, beaming
Z-Wave Syncing - retrieved multi-endpoint types: 1:(31 : 01), 2:(31 : 01), 3:(31 : 01)
Z-Wave Syncing - retrieved multi-endpoint classes: 1:[32 59 5E], 2:[32 59 5E], 3:[32 59 5E]
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Error Syncing - failed
Z-Wave Error Timeout waiting for "033 - Simple Meter". Module might be asleep, or is unreachable.
I tried several times, i have removed it and included it again, i have Switch off the power and on again, but always same results?
Thankful for any tips
/Martin