First off, thanks for the new 7.0.2 software. Overall things are stable, except for my locks.
-- Mac OS 10.12.1, Indigo 7.0.2, Cheese grater Mac Pro (2010)
I have 6 Kwikset locks in my home that were successfully controlled via the Vera Bridge plugin before Indigo 7. It took a while, but I moved all of the locks to my Z-wave controller and included them in Indigo. Each device synced properly and each lock has the new fancy locked/unlocked icons in the Device section.
Here are some specifics:
Model: SmartCode Lock, firmware 2.0.6
Manufacturer: Kwikset
Neighbors: 1, 8, 9, 17, 19, 20, 25, 26, 32, 40, 42, 46, 49, 52, 53, 54, 55, 57, 58, 62, 63, 65, 67, 68, 78, 80, 81, 82, 83, 84, 86, 87, 88, 97, 99, 100, 101, 105,
Associations: 1:[1]
Encryption: Enabled for Commands 80 85 86 8B 4C 4E 98 20 62 63 70 71 72 75
Here's the problem-- More often than not, and inconsistently, with each lock, the reported state is incorrect, with a Last Update time appropriate for the situation.
Example-- I'll command the locks to lock. Some will actuate, some will not, but all will report "locked" with a Last Update correct. When I moved them over to Indigo, they were all actuating properly for the first couple weeks. Now the lock behavior is very intermittent. I replaced all the batteries when I moved them over to Indigo.
Here is an example entry from the Event Log:
Z-Wave sent "Office Door Lock" lock
It showed no errors, and the State turned Green (locked) the "last update" is correct, but the lock did not actuate.
It looks like Indigo is not telling me the truth-- or maybe the locks are not telling Indigo the truth. Any suggestions?