Hi, Would you be willing to add support and parameters for these DIN Dimmers please ? The dimmer standard function is working but the additional temperature sensor is not recognised. I guess they are the same as the Flush dimmers except they don't have the additional I2 & I3 Inputs. Sync results below.
Thanks.
2 Dec 2016, 09:47:04
Z-Wave Syncing - started for "_Lounge Pelmet & Wall Lights"
Z-Wave Syncing - retrieved module neighbors list: 1, 3, 5, 11, 25, 30, 33, 43, 57, 68, 74, 75, 77, 78, 79, 82, 83, 85, 86, 87
Z-Wave Syncing - assigning return route to "076 - _Lounge Pelmet & Wall Lights"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Qubino - 0159, Din Dimmer (ZMNHSD) - 00010052
Z-Wave Syncing - retrieved protocol version 4.05, app version 1.01
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Mulitlevel Switch : Dimmable Power Switch (04 : 11 : 01, base 26)
Z-Wave Syncing - retrieved command classes: 20v1 25v1 86v1 27v1 72v1 8Ev1 70v1 32v4 73v1 59v1 5Av1 26v3 5Ev1 85v1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, beaming
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - retrieved group 3 associations: []
Z-Wave Syncing - retrieved group 4 associations: []
Z-Wave Syncing - retrieved group 5 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - complete
Z-Wave sent "_Lounge Pelmet & Wall Lights" status request
Z-Wave sent "_Lounge Pelmet & Wall Lights" energy status request