Qubino DIN Dimmers (ZMNHSD)

Hi, Would you be willing to add support and parameters for these DIN Dimmers please ? The dimmer standard function is working but the additional temperature sensor is not recognised. I guess they are the same as the Flush dimmers except they don't have the additional I2 & I3 Inputs. Sync results below.

Thanks.

2 Dec 2016, 09:47:04
Z-Wave Syncing - started for "_Lounge Pelmet & Wall Lights"
Z-Wave Syncing - retrieved module neighbors list: 1, 3, 5, 11, 25, 30, 33, 43, 57, 68, 74, 75, 77, 78, 79, 82, 83, 85, 86, 87
Z-Wave Syncing - assigning return route to "076 - _Lounge Pelmet & Wall Lights"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Qubino - 0159, Din Dimmer (ZMNHSD) - 00010052
Z-Wave Syncing - retrieved protocol version 4.05, app version 1.01
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Mulitlevel Switch : Dimmable Power Switch (04 : 11 : 01, base 26)
Z-Wave Syncing - retrieved command classes: 20v1 25v1 86v1 27v1 72v1 8Ev1 70v1 32v4 73v1 59v1 5Av1 26v3 5Ev1 85v1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, beaming
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - retrieved group 3 associations: []
Z-Wave Syncing - retrieved group 4 associations: []
Z-Wave Syncing - retrieved group 5 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - complete
Z-Wave sent "_Lounge Pelmet & Wall Lights" status request
Z-Wave sent "_Lounge Pelmet & Wall Lights" energy status request

[matt (support)]

Yes, I've now added this one to the feature request list. It'll require a new definition so it likely won't make it into a bug fix release but hopefully we'll be able to get to it pretty quickly.

Believe an update is due on this one ? Any plans to integrate support please ? Thanks.

[matt (support)]

This one is definitely still on the list but hasn't been implemented yet.

[matt (support)]

Indigo 7.2.0 is now available for download and now supports the Qubino Din Dimmer (ZMNHSD).

Thank you ! Temperature fields are all now showing. Unfortunately the firmware on these devices needs updated to be able to report temperature properly but Qubino have offered to do this FOC. Should be good once they are all on the new firmware.