Aeon Labs MultiSensor 6 ZW100 (Indigo7)

Posted on
Sun Mar 26, 2017 9:30 pm
Vig offline
Posts: 111
Joined: Oct 06, 2015

Re: Aeon Labs MultiSensor 6 ZW100 (Indigo7)

Bought several of these sensors (firmware 1.07) to "pair" with my thermostat from different rooms to kick off the AC accordingly. Little did I know that the temperature is not a "push" based but only retrieved by polling. To make things worse it doesn't mater what I configure in my Indigo (see the screen attached) which is currently set to poll every 5 minutes (see the Log output showing 300seconds poll), but the stubborn ZW100 only reports the values every 30 minutes. Does anyone have an idea as why I can't make the devices report the values the way it gets set in Indigo? The sensors are USB powered.

Screen Shot 2017-03-26 at 11.07.05 PM.png
Screen Shot 2017-03-26 at 11.07.05 PM.png (270.41 KiB) Viewed 2924 times


...... Indigo is set to poll every 300seconds:
Z-Wave Debug started polling of "046 - Motion Sensor" approx every 300 seconds
Z-Wave Debug started polling of "047 - Motion Sensor" approx every 300 seconds
.....

.... Indigo is polling every 300 seconds:
Mar 26, 2017, 12:15:12 AM
Z-Wave Debug polling status of node "046 - Motion Sensor"
Z-Wave Debug polling status of node "047 - Motion Sensor" (defer list)
Mar 26, 2017, 12:20:14 AM
Z-Wave Debug polling status of node "046 - Motion Sensor"
Z-Wave Debug polling status of node "047 - Motion Sensor" (defer list)
Mar 26, 2017, 12:25:16 AM
Z-Wave Debug polling status of node "046 - Motion Sensor"
Z-Wave Debug polling status of node "047 - Motion Sensor" (defer list)

.... The sensors only reports every 30minutes:
Mar 26, 2017, 10:39:47 PM
Z-Wave received "047 - Temperature" sensor update to 71.0 °F
Z-Wave received "047 - Temperature" sensor update to 71.0 °F
Z-Wave received "047 - Humidity" sensor update to 27%
Z-Wave received "047 - Luminance" sensor update to 45 lux
Z-Wave received "047 - Ultraviolet" sensor update to 0
Mar 26, 2017, 10:53:53 PM
Z-Wave received "046 - Temperature" sensor update to 71.1 °F
Z-Wave received "046 - Humidity" sensor update to 25%
Z-Wave received "046 - Luminance" sensor update to 0 lux
Z-Wave received "046 - Ultraviolet" sensor update to 0
Mar 26, 2017, 11:09:48 PM
Z-Wave received "047 - Temperature" sensor update to 71.0 °F
Z-Wave received "047 - Humidity" sensor update to 25%
Z-Wave received "047 - Luminance" sensor update to 45 lux
Z-Wave received "047 - Ultraviolet" sensor update to 0
Mar 26, 2017, 11:23:54 PM
Z-Wave received "046 - Temperature" sensor update to 70.8 °F
Z-Wave received "046 - Humidity" sensor update to 25%
Z-Wave received "046 - Luminance" sensor update to 0 lux
Z-Wave received "046 - Ultraviolet" sensor update to 0

Posted on
Sun Mar 26, 2017 10:03 pm
srkinard offline
Posts: 320
Joined: Apr 10, 2016
Location: Austin, Texas

Re: Aeon Labs MultiSensor 6 ZW100 (Indigo7)

Did you add them to your Z-wave network on battery? Or powered by USB? If you add them on battery then they will only return data periodically on the non-motion sensors...even if you plug them into power afterwards they retain the battery-saver settings from joining.

I always add mine on AC power and even on battery they transmit quickly...they just use up batteries faster.

Hope this helps
Ross

Posted on
Sun Mar 26, 2017 10:09 pm
Vig offline
Posts: 111
Joined: Oct 06, 2015

Re: Aeon Labs MultiSensor 6 ZW100 (Indigo7)

srkinard wrote:
Did you add them to your Z-wave network on battery? Or powered by USB? If you add them on battery then they will only return data periodically on the non-motion sensors...even if you plug them into power afterwards they retain the battery-saver settings from joining.

I always add mine on AC power and even on battery they transmit quickly...they just use up batteries faster.

Hope this helps
Ross


thanks srkinard, never had them on batteries though, they've always been on USB from the get go.

Posted on
Mon Mar 27, 2017 11:16 am
matt (support) offline
Site Admin
User avatar
Posts: 21411
Joined: Jan 27, 2003
Location: Texas

Re: Aeon Labs MultiSensor 6 ZW100 (Indigo7)

You have the reporting interval set to 1800 seconds (30 minutes). This particular module has both a wake interval which can be used for Indigo to push settings changes to it and read the battery level, and a sensor reporting interval. You want to modify the latter in this case.

Image

Posted on
Fri Apr 28, 2017 2:26 pm
farberm offline
Posts: 393
Joined: Feb 24, 2008

Re: Aeon Labs MultiSensor 6 ZW100 (Indigo7)

Well I just installed one of these and my temp is off by about 3 degrees. How do I adjust the temp setting. Does it have to be done with windows software or can it be done thru indigo?

Posted on
Sat Apr 29, 2017 1:19 am
howartp offline
Posts: 4559
Joined: Jan 09, 2014
Location: West Yorkshire, UK

Re: Aeon Labs MultiSensor 6 ZW100 (Indigo7)

You don't need Windows to just set config parameters - Indigo can do that via Interfaces > Zwave > Set config parameters.

The parameter you need is 201, BUT it depends what firmware your sensor is running, and whether this parameter existed in the older 1.04 firmware if you're on it.

The manual isn't particularly clear on values; it's a two bit value with the first being the increase/decrease you require, and the second being 'C/'F.

Follow the latest link to the manual above, scroll to bottom, and click link to More Advanced Configuration and the 1.07 link.


Sent from my iPhone using Tapatalk

Posted on
Mon May 01, 2017 6:35 am
johnpolasek offline
Posts: 911
Joined: Aug 05, 2011
Location: Aggieland, Texas

Re: Aeon Labs MultiSensor 6 ZW100 (Indigo7)

howartp wrote:
You don't need Windows to just set config parameters - Indigo can do that via Interfaces > Zwave > Set config parameters.


Sent from my iPhone using Tapatalk


But you do to update the firmware, correct? Mine are still running out of date firmware because I don't want to go through the exclude/include in windows/exclude in windows/include hassles for them.

Posted on
Mon May 01, 2017 6:36 am
howartp offline
Posts: 4559
Joined: Jan 09, 2014
Location: West Yorkshire, UK

Re: Aeon Labs MultiSensor 6 ZW100 (Indigo7)

Correct.


Sent from my iPhone using Tapatalk

Posted on
Tue Jun 12, 2018 7:22 pm
pbaperez offline
User avatar
Posts: 35
Joined: Jun 08, 2011
Location: Austin, TX

Re: Aeon Labs MultiSensor 6 ZW100 (Indigo7)

This is an old thread but I just ran into the problem and found the parameters to use when configuring the gateway. Thought it would be useful.

Configure the Multisensor 6 using your gateway.

Not all gateways have the ability to configure its devices, this step will require a gateway that can make changes to parameter configuration settings. Ask your gateway support team if your gateway supports manual configuration to Z-Wave devices.

Battery Powered
Set these parameter settings:

    Parameter 101 [4 byte] = 241 // report all sensors
    Parameter 111 [4 byte] = 240 // set report of sensors to report every 240 seconds or 4 minutes
    Wakeup Interval = 240 // This sets the minimum of the report set on Parameter 111-113, if this is higher than parameter 111, this will set the report interval time of your sensors.


Now wait 4 minutes and see if the values start updating. Once you are able to see any readings at all, I would suggest that you change the configuration settings. The setting above will greatly eat up battery power, where you may see around 2-3 weeks worth of battery life. I would recommend the following settings at a very minimum to achieve around a 8 - 12 month battery life (set it higher if you will);

    Parameter 101 [4 byte] = 241 // report all sensors
    Parameter 111 [4 byte] = 1200 // set report interval of all sensors to every 1200 seconds.
    Wakeup Interval = 1200 // This sets the minimum of the report set on Parameter 111-113, if this is higher than parameter 111, this will set the report interval time of your sensors.

USB Power
On USB power, you have limitless use of configurations, you can easily ignore the wakeup interval, and ignore the amount of battery power you need to save. I would suggest these settings:
    Parameter 101 [4 byte] = 241 // report all sensors
    Parameter 111 [4 byte] = 30 // set report interval of all sensors to every 30 seconds.

https://aeotec.freshdesk.com/support/solutions/articles/6000156717-troubleshoot-multisensor-6-sensors-light-humidity-temperature-uv-

Who is online

Users browsing this forum: No registered users and 2 guests

cron