Mostly works, but detected as an old one ( FGK101 ), therefore wrong parameters applied and no temperature readings available.
http://manuals.fibaro.com/content/manua ... T-v2.0.pdf
Much more reliable in terms of inclusion process. Working distance is much better as well.
Z-Wave Syncing - started for "Front Entrance Door Sensor"
Z-Wave Syncing - retrieved module neighbors list: 2, 3, 4, 5, 6, 10, 16, 17, 25, 27, 28, 29, 30, 36, 37, 38, 39, 47, 52, 54, 55, 56, 60, 61, 62, 63, 64, 65, 68, 70, 72, 80, 88, 91, 92, 94, 95, 98, 99, 108, 116, 119, 130, 141, 143, 144, 157, 163, 165, 166, 179, 182, 201, 218, 220, 221, 222, 223, 230
Z-Wave Syncing - assigning return route to "104 - Front Entrance Door Sensor"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Fibaro System - 010F, Door/Window Sensor (FGK101) - 07011001
Z-Wave Syncing - retrieved protocol version 4.05, app version 3.02
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : -- : -- (04 : 07 : 01, base 00)
Z-Wave Syncing - retrieved command classes: 20v1 80v1 22v1 84v2 85v1 86v1 71v1 70v1 2Bv1 8Ev1 30v1 31v5 72v1 73v1 56v1 98v1 59v1 5Av1 9Cv1 7Av1 5Ev1
Z-Wave Syncing - retrieved wake interval of 60 minutes
Z-Wave Syncing - device "104 - Front Entrance Door Sensor" wake interval changed to 60 minutes
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: [1]
Z-Wave Syncing - retrieved group 3 associations: [1]
Z-Wave Syncing - retrieved group 4 associations: []
Z-Wave Syncing - retrieved group 5 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - group 2 association to interface already exists (skipping)
Z-Wave Syncing - group 3 association to interface already exists (skipping)
Z-Wave Syncing - retrieved battery level of 100%
Z-Wave Syncing - complete
Z-Wave device "104 - Front Entrance Door Sensor" parameter 1 "Delay duration until door/window sensor turns off" changed to 0 seconds
Z-Wave device "104 - Front Entrance Door Sensor" parameter 2 "Enable LED flash on change" changed to false
Z-Wave device "104 - Front Entrance Door Sensor" parameter 3 "Main sensor switch type (0: normally closed, 1: normally open, 2: push button, 3: toggle)" changed to 0
Z-Wave device "104 - Front Entrance Door Sensor" parameter 12 "Temperature change sensitivity trigger (0: every 4 mins, 8: 0.5 °C, 16: 1.0 °C, 24: 1.5 °C, 32: 2.0 °C, 48: 3.0 °C, 64: 4.0 °C, 80: 5.0 °C)" changed to 255
Z-Wave received "Front Entrance Door Sensor Tamper Switch" status update is on
Z-Wave received "Front Entrance Door Sensor" status upd