Fibaro "The Button"

Posted on
Sun Nov 05, 2017 4:40 pm
howartp offline
Posts: 4559
Joined: Jan 09, 2014
Location: West Yorkshire, UK

Re: Fibaro "The Button"

You could trigger on Battery Update or indeed “Any communication” :-)


Sent from my iPhone using Tapatalk Pro

Posted on
Sun Nov 05, 2017 4:41 pm
howartp offline
Posts: 4559
Joined: Jan 09, 2014
Location: West Yorkshire, UK

Re: Fibaro "The Button"

Have you turned on Zwave debugging or a ZWave Watcher to check what’s being received?


Sent from my iPhone using Tapatalk Pro

Posted on
Tue Nov 07, 2017 10:18 am
petematheson offline
Posts: 847
Joined: Sep 14, 2014
Location: Southampton, UK

Re: Fibaro "The Button"

I get this with Z-Wave debugging on (single press of the button)

Z-Wave Debug RCVD requestBatteryLevel: 01 09 00 04 00 2C 03 80 03 64 3A
Z-Wave Debug . . requestBatteryLevel: node 044, level 100
Z-Wave received "044 - Button - Erica" status update battery level 100%
Z-Wave Debug RCVD nodeAwake: 01 08 00 04 00 2C 02 84 07 5E
Z-Wave Debug . . nodeAwake: node 044
Z-Wave Debug . . nodeAwake: delaying processing for 4.0 seconds
Z-Wave Debug . . . . . . . : skipping battery check (next check in 716 mins)
Z-Wave Debug SENT goToSleep: 01 09 00 13 2C 02 84 08 24 37 54
Z-Wave Debug RCVD packet: 01 07 00 13 37 00 00 04 D8 (hex)

Posted on
Tue Nov 07, 2017 10:40 am
autolog offline
Posts: 3988
Joined: Sep 10, 2013
Location: West Sussex, UK [GMT aka UTC]

Re: Fibaro "The Button"

If you listen (with your ear :wink: ) can you hear a distinct click as you press the button. If not then it may be defective. I had one that behaved like this (see an my earlier post in this thread) and I got it replaced. The new one has a very definite click. :)

Posted on
Tue Nov 07, 2017 11:17 am
petematheson offline
Posts: 847
Joined: Sep 14, 2014
Location: Southampton, UK

Re: Fibaro "The Button"

I definitely have a very definitive click on all of my buttons !

Posted on
Tue Nov 07, 2017 2:32 pm
Gusten offline
Posts: 171
Joined: Dec 30, 2015
Location: Sweden, Gothenburg

Re: Fibaro "The Button"

I had the same error, it start working again after a reesync for a while, then the error started again. I got them replaced and now it’s working.

Posted on
Tue Sep 18, 2018 11:40 am
nathanw offline
Posts: 152
Joined: Sep 05, 2011
Location: Boston, MA

Re: Fibaro "The Button"

Similar issue - all I see in Indigo when I press the button (any number of times) is the battery level. With Z-Wave debugging enabled, four presses:

Code: Select all
2018-09-12 07:41:23.458 Z-Wave Debug    RCVD nonceFetch: node 010
2018-09-12 07:41:23.459 Z-Wave Debug    SENT nonceReport: 01 11 00 13 0A 0A 98 80 F6 F2 2C FC E1 BC 74 DD 25 CD 2D
2018-09-12 07:41:23.459 Z-Wave Debug    starting node status polling thread
2018-09-12 07:41:23.494 Z-Wave Debug    RCVD encryptedPacket: 00 80 03 64 (decrypted)
2018-09-12 07:41:23.495 Z-Wave Debug    RCVD requestBatteryLevel: 01 09 00 04 00 0A 03 80 03 64 FF
2018-09-12 07:41:23.496 Z-Wave Debug    . .  requestBatteryLevel: node 010, level 100
2018-09-12 07:41:23.496 Z-Wave  received "010 - Blue Button" status update battery level 100%
2018-09-12 07:41:23.515 Z-Wave Debug    RCVD nonceFetch: node 010
2018-09-12 07:41:23.517 Z-Wave Debug    SENT nonceReport: 01 11 00 13 0A 0A 98 80 F6 F2 2C FC E1 BC 74 DD 25 CE 2E
2018-09-12 07:41:23.564 Z-Wave Debug    RCVD encryptedPacket: 00 84 07 (decrypted)
2018-09-12 07:41:23.570 Z-Wave Debug    RCVD nodeAwake: 01 08 00 04 00 0A 02 84 07 FF
2018-09-12 07:41:23.570 Z-Wave Debug    . .  nodeAwake: node 010
2018-09-12 07:41:23.571 Z-Wave Debug    . .  nodeAwake: delaying processing for 4.0 seconds
2018-09-12 07:41:27.584 Z-Wave Debug    SENT requestBatteryLevel: 01 09 00 13 0A 02 80 02 25 CF 85
2018-09-12 07:41:27.861 Z-Wave Debug    . .  nodeAwake: inhibit count++ to 1
2018-09-12 07:41:27.867 Z-Wave Debug    . .  nodeAwake: started inhibit sleep timer
2018-09-12 07:41:27.868 Z-Wave Debug    RCVD requestBatteryLevel: 01 09 00 04 00 0A 03 80 03 64 1C
2018-09-12 07:41:27.869 Z-Wave Debug    . .  requestBatteryLevel: node 010, level 100
2018-09-12 07:41:27.869 Z-Wave  received "010 - Blue Button" status update battery level 100%
2018-09-12 07:41:27.870 Z-Wave Debug    . .  nodeAwake: inhibit count-- to 0
2018-09-12 07:41:27.871 Z-Wave Debug    . .  nodeAwake: stopping inhibit sleep timer
2018-09-12 07:41:27.871 Z-Wave Debug    SENT nonceRequest: 01 09 00 13 0A 02 98 40 25 D0 C0
2018-09-12 07:41:27.914 Z-Wave Debug    RCVD nonceReport: node 010, nonce 99 99 3B 53 FF 30 66 48
2018-09-12 07:41:28.167 Z-Wave Debug    SENT goToSleep: 84 08 (encrypted)
2018-09-12 07:41:28.188 Z-Wave Debug    RCVD packet: 01 07 00 13 D1 00 00 01 3B (hex)
2018-09-12 07:41:28.390 Z-Wave Debug    RCVD nonceFetch: node 010
2018-09-12 07:41:28.391 Z-Wave Debug    SENT nonceReport: 01 11 00 13 0A 0A 98 80 43 A4 D7 F0 CF A2 0A B1 25 D2 04
2018-09-12 07:41:28.403 Z-Wave Debug    RCVD encryptedPacket: 00 80 03 64 (decrypted)
2018-09-12 07:41:28.405 Z-Wave Debug    RCVD requestBatteryLevel: 01 09 00 04 00 0A 03 80 03 64 FF
2018-09-12 07:41:28.406 Z-Wave Debug    . .  requestBatteryLevel: node 010, level 100
2018-09-12 07:41:28.406 Z-Wave  received "010 - Blue Button" status update battery level 100%
2018-09-12 07:41:28.407 Z-Wave Debug    RCVD nonceFetch: node 010
2018-09-12 07:41:28.408 Z-Wave Debug    SENT nonceReport: 01 11 00 13 0A 0A 98 80 43 A4 D7 F0 CF A2 0A B1 25 D3 05
2018-09-12 07:41:28.685 Z-Wave Debug    . .  nonceReport: requeuing 1 unsolicited packets
2018-09-12 07:41:28.687 Z-Wave Debug    RCVD nonceFetch: node 010
2018-09-12 07:41:28.687 Z-Wave Debug    RCVD encryptedPacket: 00 80 03 64 (decrypted)
2018-09-12 07:41:28.688 Z-Wave Debug    RCVD requestBatteryLevel: 01 09 00 04 00 0A 03 80 03 64 FF
2018-09-12 07:41:28.688 Z-Wave Debug    . .  requestBatteryLevel: node 010, level 100
2018-09-12 07:41:28.689 Z-Wave  received "010 - Blue Button" status update battery level 100%

Posted on
Tue Sep 18, 2018 12:26 pm
matt (support) offline
Site Admin
User avatar
Posts: 21411
Joined: Jan 27, 2003
Location: Texas

Re: Fibaro "The Button"

Was it working and then it stopped, or has it never worked?

Also, it looks like you included it with encryption. I'd suggest excluding it and re-including it without encryption to see if that makes a difference. If not then it sounds like it might be defective.

Image

Posted on
Tue Sep 18, 2018 2:48 pm
nathanw offline
Posts: 152
Joined: Sep 05, 2011
Location: Boston, MA

Re: Fibaro "The Button"

It did work, when I first set it up, just about a year ago. See earlier in this thread where I updated from 7.0.2 to 7.0.4 to get proper tap recognition.

I'll try excluding and re-including it without encryption and see what happens.

Posted on
Tue Sep 18, 2018 3:01 pm
petematheson offline
Posts: 847
Joined: Sep 14, 2014
Location: Southampton, UK

Re: Fibaro "The Button"

I had the exact same issue with all of my buttons.
I ended up sending them back to vesternet and replaced them with the Aeotec Dual or Quad buttons which work great!


Sent from my iPhone using Tapatalk

Posted on
Tue Sep 25, 2018 9:33 am
nathanw offline
Posts: 152
Joined: Sep 05, 2011
Location: Boston, MA

Re: Fibaro "The Button"

I was able to exclude it and re-include it without encryption. I'll be curious to see if this happens again.

(So far the button is just a toy; I haven't figured out a good application for it yet).

Posted on
Thu Feb 07, 2019 7:50 pm
nathanw offline
Posts: 152
Joined: Sep 05, 2011
Location: Boston, MA

Re: Fibaro "The Button"

Follow-up: It did it again. I left it unused for several months and then went to use it, and all I got was battery level.

Posted on
Mon Mar 04, 2019 11:01 pm
howartp offline
Posts: 4559
Joined: Jan 09, 2014
Location: West Yorkshire, UK

Re: Fibaro "The Button"

Ditto


Sent from my iPhone using Tapatalk Pro

Posted on
Thu Dec 19, 2019 11:26 am
MR_ROBOT_ offline
Posts: 28
Joined: Feb 11, 2019
Location: Lancashire, UK

Re: Fibaro "The Button"

nathanw wrote:
Follow-up: It did it again. I left it unused for several months and then went to use it, and all I got was battery level.


same issue, used to work and now all I get is battery percentage on pressing it. hmmmmmmm

Posted on
Fri Aug 28, 2020 5:54 pm
peszko offline
Posts: 311
Joined: Mar 07, 2012

Re: Fibaro "The Button"

I finally reached the pinnacle of home automation with "The Button". When you press it, it plays a fart sound in the house! I rest my case.

Who is online

Users browsing this forum: No registered users and 1 guest