Aeotec Garage Door Controller ZW062

Have you tried it? If not it might be helpful to them to test it and see what response you get.

No haven't tried it yet....posted since I didn't see it in the new modules available in 7. Will give it a shot although I'm not hopeful!

Indeed although my door lock wasn't listed and it does work, so don't give up all hope


Sent from my iPad using Tapatalk

thanks. Will report back.


Sent from my iPhone using Tapatalk

[matt (support)]

We did add a device definition for the ZW062, but I was unable to get it working correctly. It might have been that my particular module had old/beta firmware though. I'm still waiting for details on Aeotec on how I can update it. So please let us know if it works for you.

We did add a device definition for the ZW062, but I was unable to get it working correctly. It might have been that my particular module had old/beta firmware though. I'm still waiting for details on Aeotec on how I can update it. So please let us know if it works for you.

Hi Matt,

I added the controller and it's working.
Its got Turn On/Off command and in the device settings:

Screen Shot 2016-11-15 at 17.32.20.png (43.39 KiB) Viewed 3587 times

Still have to hook it up to test. Below is the sync log:

Z-Wave started controller inclusion mode with encryption
Z-Wave controller included module: 051 - Secure Barrier Add-On
Z-Wave querying module for encryption support
Z-Wave starting encryption key exchange with module
Z-Wave completed encryption key exchange with module
Z-Wave stopped controller inclusion mode
Z-Wave Syncing - started for "051 - Secure Barrier Add-On"
Z-Wave Syncing - retrieved module neighbors list: 2, 3, 4, 5, 6, 7, 8, 16, 23, 25, 26, 27, 28, 31, 32, 34, 37, 38, 39, 40, 45
Z-Wave Syncing - assigning return route to "051 - Secure Barrier Add-On"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Aeon Labs - 0086, Garage Door Controller (ZW062) - 0203003E
Schedule Time Update
Z-Wave Syncing - retrieved protocol version 3.99, app version 1.11
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Entry Control : Secure Barrier Add-On (04 : 40 : 07, base 00)
Z-Wave Syncing - retrieved command classes: 20v1 82v1 25v1 86v1 70v1 71v1 72v1 73v1 5Av1 98v1 59v1 7Av1 66v1 5Ev1 85v1
Z-Wave Syncing - retrieved encrypt commands: 82 25 86 70 71 72 73 59 5A 66 7A 85
Z-Wave Syncing - retrieved capabilities: routing, beaming, security
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - retrieved parameter 252 "Lock configuration" is false
Z-Wave Syncing - retrieved parameter 35 "Sensor calibration timeout" is 30 seconds
Z-Wave Syncing - retrieved parameter 37 "Alarm mode when opening" is 167905281
Z-Wave Syncing - retrieved parameter 38 "Alarm mode when closing" is 134416385
Z-Wave Syncing - retrieved parameter 39 "Alarm mode when unknown" is 100927488
Z-Wave Syncing - retrieved parameter 40 "Alarm mode when closed" is 33883392
Z-Wave Syncing - retrieved parameter 80 "State change report type" is 2
Z-Wave Syncing - changed device "050 - Door Controller" address from undefined to 051
Z-Wave Syncing - complete

The module did add on my previous version, which in my case was also a beta I presume which was v1.03 or some such. I managed to update it to v1.11 using the instructions provided here by Aeotec: https://aeotec.freshdesk.com/support/so ... ware-v1-11
You obviously need a windows machine and just a tip, make sure you have installed the drivers for the z stick otherwise it'll start the update and fail. Took me all of the afternoon to figure that one out and didn't realise since windows said it installed the drivers automatically which obviously it did not!!

P.S. Thanks durosity for the push to try it!!

Ok all hooked up and connected. The status request is greyed out.

[matt (support)]

So toggling it ON/OFF does cause the garage to open (or close)?

I'm not sure if we can poll the status of this module or not. Can you turn on debug Z-Wave logging and capture what the module sends when the door is both opened and closed? Do it a few times and annotate the log to describe which log data corresponds to which open/close state.

Yes ON/OFF opens/closes the garage door.

Here's the output:

ON

Z-Wave Debug SENT nonceRequest: 01 09 00 13 33 02 98 40 25 87 AE
Z-Wave Debug RCVD nonceReport: node 051, nonce CF 27 A7 47 51 9E A2 E9
Z-Wave Debug SENT setRelayValue: 25 01 FF (encrypted)
Z-Wave Debug RCVD nonceReport: node 051, nonce A7 D0 92 70 EB CA 8F 43 (saving)
Z-Wave sent "050 - Door Controller" on
Z-Wave Debug RCVD nonceFetch: node 051
Z-Wave Debug SENT nonceReport: 01 11 00 13 33 0A 98 80 7A 3D 65 16 04 3F C1 80 25 89 3E
Z-Wave Debug RCVD encryptedPacket: 00 66 03 FD (decrypted)
Z-Wave Debug RCVD requestReply1: 01 09 00 04 00 33 03 66 03 FD FF (hex)

OFF

Z-Wave Debug SENT nonceRequest: 01 09 00 13 33 02 98 40 25 8A A3
Z-Wave Debug RCVD nonceReport: node 051, nonce 70 24 D0 72 9C A6 F5 76
Z-Wave Debug SENT setRelayValue: 25 01 00 (encrypted)
Z-Wave Debug RCVD nonceReport: node 051, nonce C9 B4 29 9F 59 C6 5B B8 (saving)
Z-Wave sent "050 - Door Controller" off
Z-Wave Debug RCVD nonceFetch: node 051
Z-Wave Debug SENT nonceReport: 01 11 00 13 33 0A 98 80 54 8A 4B F4 99 A2 F6 FE 25 8C 27
Z-Wave Debug RCVD encryptedPacket: 00 66 03 FD (decrypted)
Z-Wave Debug RCVD requestReply1: 01 09 00 04 00 33 03 66 03 FD FF (hex)


ON

Z-Wave Debug SENT nonceRequest: 01 09 00 13 33 02 98 40 25 90 B9
Z-Wave Debug RCVD nonceReport: node 051, nonce 4E FB 98 F0 71 8F 47 2B
Z-Wave Debug SENT setRelayValue: 25 01 FF (encrypted)
Z-Wave Debug RCVD nonceReport: node 051, nonce EE D9 79 54 44 0C 0D 58 (saving)
Z-Wave sent "050 - Door Controller" on
Z-Wave Debug RCVD nonceFetch: node 051
Z-Wave Debug SENT nonceReport: 01 11 00 13 33 0A 98 80 3D 7C 7C E5 F3 C9 A2 8B 25 92 A0
Z-Wave Debug RCVD encryptedPacket: 00 66 03 FD (decrypted)
Z-Wave Debug RCVD requestReply1: 01 09 00 04 00 33 03 66 03 FD FF (hex)

OFF

Z-Wave Debug SENT nonceRequest: 01 09 00 13 33 02 98 40 25 93 BA
Z-Wave Debug RCVD nonceReport: node 051, nonce EB E5 70 61 E9 0F 65 06
Z-Wave Debug SENT setRelayValue: 25 01 00 (encrypted)
Z-Wave Debug RCVD nonceReport: node 051, nonce 2C 33 13 B5 D2 28 C9 3C (saving)
Z-Wave sent "050 - Door Controller" off
Z-Wave Debug RCVD nonceFetch: node 051
Z-Wave Debug SENT nonceReport: 01 11 00 13 33 0A 98 80 29 4E 4F 00 AC 21 BA D4 25 95 A7
Z-Wave Debug RCVD encryptedPacket: 00 66 03 FD (decrypted)
Z-Wave Debug RCVD requestReply1: 01 09 00 04 00 33 03 66 03 FD FF (hex)

[matt (support)]

So does the ON command always open the garage (and result in an ON status in Indigo's UI)? If it is already open and you press ON again, does it do nothing?

And likewise, does OFF always correspond to close?

Lastly, if you open/close the garage manually (not from Indigo but via the garage door button), does Indigo's UI update its ON/OFF status to reflect the correct state?

Seems like it acts as a toggle switch rather than ON always opening and OFF always closing.

If I select ON the garage door opens, indigo status changes to ON. If I press ON again the garage door closes, indigo status stays ON. Same with the OFF.

If I open/close manually Indigo's UI does not update at all.

[matt (support)]

Indigo 7.0.2 is now available for download. I've tweaked how it handles the Aeotec Garage door controller. Hopefully, the ON command will always open the door and OFF always close it. Please let me know how it works for you.

The OFF command closes the door but the ON command still toggles.

Edit: Just checked again today and it does not close the door with the OFF command. On still works but toggles.

[matt (support)]

So did the behavior change with v7.0.2 in regards to ON toggling the door open/closed? That is, before 7.0.2 was it the case that ON always opened and OFF always closed (and never toggled)?

Lastly, can you turn on debug logging and copy/paste into a reply what occurs with 2 ON presses (which it sounds like like will toggle open then close?) and then 2 OFF presses (which does nothing?).

Before 7.0.2, ON toggled and OFF toggled.
After 7.0.2, ON toggles and OFF does nothing.

Below are the results for 2 ON presses and 3 OFF presses with debug:

Z-Wave Debug SENT nonceRequest: 01 09 00 13 33 02 98 40 25 05 2C
Z-Wave Debug RCVD nonceReport: node 051, nonce 8A 97 2A E1 E9 86 B3 93
Z-Wave Debug SENT setBarrierValue: 66 01 FF (encrypted)
Z-Wave Debug RCVD nonceReport: node 051, nonce 3F 1B B6 AE 3A D5 EC FD (saving)
Z-Wave sent "Garage Door Controller" open
Z-Wave Debug RCVD nonceFetch: node 051
Z-Wave Debug SENT nonceReport: 01 11 00 13 33 0A 98 80 6B BF 41 BD 80 EA 9E 37 25 07 15
Z-Wave Debug RCVD encryptedPacket: 00 66 03 FD (decrypted)
Z-Wave Debug RCVD requestBarrierStatus: 01 09 00 04 00 33 03 66 03 FD FF
Z-Wave Debug . . requestBarrierStatus: node 051, endpoint None, value 253
Z-Wave Debug RCVD sensorSetLevel: 01 09 00 04 00 1E 03 20 01 FF 31
Z-Wave Debug . . sensorSetLevel: node 030, endpoint None, cmdClass 20, value 255
Z-Wave received "Garage Tilt Sensor" status update is on
Trigger Garage Tilt Door Timer
Z-Wave Debug RCVD requestAlarmSensorStatus: 01 10 00 04 00 1E 0A 71 05 07 FF 00 FF 07 02 00 00 89
Z-Wave Debug . . requestAlarmSensorStatus: node 030, endpoint None, cmdClass 71, type 7, value 255, classSubKey 7107FF
Z-Wave Debug . . requestAlarmSensorStatus: typeExt 7, valueExt 2, classSubKeyExt 7107FF0702
Z-Wave received "Garage Tilt Tamper Switch" status update is on
Z-Wave Lock Manager Unknown lock status received: 7 [Node: 30]
Z-Wave Debug SENT nonceRequest: 01 09 00 13 33 02 98 40 25 08 21
Z-Wave Debug RCVD nonceReport: node 051, nonce 3F A5 0E 5F C4 56 60 B7
Z-Wave Debug RCVD nonceReport: node 051, nonce 14 0C 79 EB E8 D2 6A AD (duplicate -- overriding previous)
Z-Wave Debug SENT setBarrierValue: 66 01 FF (encrypted)
Z-Wave Debug RCVD nonceReport: node 051, nonce E8 15 04 5E 20 AA 31 D7 (saving)
Z-Wave Debug . . setBarrierValue: requeuing 1 unsolicited packets
Z-Wave Debug RCVD nonceReport: node 051, nonce F1 2D BB E7 07 84 FC 8D (saving)
Z-Wave sent "Garage Door Controller" open
Z-Wave Debug RCVD nonceFetch: node 051
Z-Wave Debug SENT nonceReport: 01 11 00 13 33 0A 98 80 D6 16 AA 66 E5 26 C5 80 25 0A 79
Z-Wave Debug RCVD encryptedPacket: 00 66 03 FD (decrypted)
Z-Wave Debug RCVD requestBarrierStatus: 01 09 00 04 00 33 03 66 03 FD FF
Z-Wave Debug . . requestBarrierStatus: node 051, endpoint None, value 253
Z-Wave Debug RCVD nonceReport: node 051, nonce 29 CF 45 16 99 99 91 53 (saving)
Z-Wave Debug RCVD sensorSetLevel: 01 09 00 04 00 1E 03 20 01 00 CE
Z-Wave Debug . . sensorSetLevel: node 030, endpoint None, cmdClass 20, value 0
Z-Wave received "Garage Tilt Sensor" status update is off
Trigger Garage Light Off (Tilt Sensor)
Trigger Garage Tilt Door Closed Timer
Z-Wave Debug RCVD requestAlarmSensorStatus: 01 10 00 04 00 1E 0A 71 05 07 00 00 FF 07 02 00 00 76
Z-Wave Debug . . requestAlarmSensorStatus: node 030, endpoint None, cmdClass 71, type 7, value 0, classSubKey 710700
Z-Wave Debug . . requestAlarmSensorStatus: typeExt 7, valueExt 2, classSubKeyExt 7107000702
Z-Wave received "Garage Tilt Tamper Switch" status update is off
Z-Wave Lock Manager Unknown lock status received: 7 [Node: 30]
Z-Wave Debug SENT nonceRequest: 01 09 00 13 33 02 98 40 25 0B 22
Z-Wave Debug RCVD nonceReport: node 051, nonce 1F E7 E6 90 EA 6F F6 D4
Z-Wave Debug SENT setBarrierValue: 66 01 00 (encrypted)
Z-Wave Debug RCVD nonceReport: node 051, nonce F5 DB F5 D0 82 79 18 F6 (saving)
Z-Wave sent "Garage Door Controller" close
Z-Wave Debug RCVD nonceFetch: node 051
Z-Wave Debug SENT nonceReport: 01 11 00 13 33 0A 98 80 1E 14 1F D9 F0 97 37 2D 25 0D 45
Z-Wave Debug RCVD encryptedPacket: 00 22 01 02 05 (decrypted)
Z-Wave Debug RCVD requestReply1: 01 0A 00 04 00 33 04 22 01 02 05 FF (hex)
Z-Wave Debug SENT nonceRequest: 01 09 00 13 33 02 98 40 25 0E 27
Z-Wave Debug RCVD nonceReport: node 051, nonce D8 42 FF 57 BD 9E 7E 16
Z-Wave Debug SENT setBarrierValue: 66 01 00 (encrypted)
Z-Wave Debug RCVD nonceReport: node 051, nonce B0 AD 60 F5 ED 02 4A AC (saving)
Z-Wave sent "Garage Door Controller" close
Z-Wave Debug RCVD nonceFetch: node 051
Z-Wave Debug SENT nonceReport: 01 11 00 13 33 0A 98 80 99 8B 4A B4 D5 2C 35 CE 25 10 07
Z-Wave Debug RCVD encryptedPacket: 00 22 01 02 05 (decrypted)
Z-Wave Debug RCVD requestReply1: 01 0A 00 04 00 33 04 22 01 02 05 FF (hex)
Z-Wave Debug RCVD sensorSetLevel: 01 09 00 04 00 0C 03 20 01 00 DC
Z-Wave Debug . . sensorSetLevel: node 012, endpoint None, cmdClass 20, value 0
Z-Wave received "Living Sensor" status update is off
Z-Wave Debug RCVD requestAlarmSensorStatus: 01 10 00 04 00 0C 0A 71 05 07 00 00 FF 07 02 00 00 64
Z-Wave Debug . . requestAlarmSensorStatus: node 012, endpoint None, cmdClass 71, type 7, value 0, classSubKey 710700
Z-Wave Debug . . requestAlarmSensorStatus: typeExt 7, valueExt 2, classSubKeyExt 7107000702
Z-Wave Lock Manager Unknown lock status received: 7 [Node: 12]
Schedule Garage Light Off (Tilt Sensor) (delayed action)
Sent Hue Lights "Garage Light" off at ramp rate 0.0 sec.
Z-Wave Debug SENT nonceRequest: 01 09 00 13 33 02 98 40 25 11 38
Z-Wave Debug RCVD nonceReport: node 051, nonce 91 53 90 A8 E8 BC 2F 7E
Z-Wave Debug SENT setBarrierValue: 66 01 00 (encrypted)
Z-Wave Debug RCVD nonceReport: node 051, nonce 16 1A 9D F4 23 0F 22 C2 (saving)
Z-Wave sent "Garage Door Controller" close
Z-Wave Debug RCVD nonceFetch: node 051
Z-Wave Debug SENT nonceReport: 01 11 00 13 33 0A 98 80 00 3E 6A 17 A7 F9 DA B0 25 13 9D
Z-Wave Debug RCVD encryptedPacket: 00 22 01 02 05 (decrypted)
Z-Wave Debug RCVD requestReply1: 01 0A 00 04 00 33 04 22 01 02 05 FF (hex)


Z-Wave Debug SENT nonceRequest: 01 09 00 13 33 02 98 40 25 17 3E
Z-Wave Debug RCVD nonceReport: node 051, nonce C3 56 B7 36 A4 B7 9E 00
Z-Wave Debug SENT setBarrierValue: 66 01 00 (encrypted)
Z-Wave Debug RCVD nonceReport: node 051, nonce FD 69 6D CA DA 49 59 20 (saving)
Z-Wave sent "Garage Door Controller" close
Z-Wave Debug RCVD nonceFetch: node 051
Z-Wave Debug SENT nonceReport: 01 11 00 13 33 0A 98 80 DD 82 0A 73 89 0E EB 1D 25 19 B7
Z-Wave Debug RCVD encryptedPacket: 00 22 01 02 05 (decrypted)
Z-Wave Debug RCVD requestReply1: 01 0A 00 04 00 33 04 22 01 02 05 FF (hex)