Page 1 of 1
Q re DSC KeyFob not triggering on disarm
Posted:
Thu Feb 18, 2021 6:06 pm
by hwitten
The KeyFob triggers on Arm ok and I see it in the Indigo log but on disarm with KeyFob there is nothing in the log. Have tried a few of the disarm events but nothing shows up.
Am I missing a configuration or just not implemented in the plugin?
Here is what I see from Eyezon.
- IMG_5658.jpeg (82.69 KiB) Viewed 3191 times
Re: Q re DSC KeyFob not triggering on disarm
Posted:
Thu Feb 18, 2021 7:38 pm
by Monstergerm
Disarming with a key fob is implemented by the plugin but I cannot test it since I do not have one.
It should generate a log entry. What happens to the Indigo states of the alarm device when you disarm it with the key fob? Does the "LEDArmed" turn off and the "LEDReady" turn on? And the "ArmedState" becomes disarmed?
Also, if you can try to change the logging level to Debug and post the log here , this would help.
Re: Q re DSC KeyFob not triggering on disarm
Posted:
Thu Feb 18, 2021 8:48 pm
by hwitten
On disarm with key fob the state of Alarm_Keypad changes to disarmed immediately but no entry in log.
LED's on keypad operate normally when key fob used to arm/disarm.
Let me know what else you want me to try.
- Code: Select all
2021-02-18 17:52:22.478 DSC Alarm Log level preferences changed to "Debug".
2021-02-18 17:52:22.479 DSC Alarm Debug getConfiguration start
2021-02-18 17:52:22.480 DSC Alarm Debug Configuration read successfully
2021-02-18 17:52:23.793 DSC Alarm Initializing communication at address: 192.168.2.192:4025
2021-02-18 17:52:23.794 DSC Alarm Communication established
2021-02-18 17:52:24.800 DSC Alarm Debug Received login request
2021-02-18 17:52:24.801 DSC Alarm Debug ACK for cmd 005.
2021-02-18 17:52:24.802 DSC Alarm Connected to Envisalink.
2021-02-18 17:52:25.810 DSC Alarm Enabling Time Broadcast
2021-02-18 17:52:25.812 DSC Alarm Debug ACK for cmd 056.
2021-02-18 17:52:25.813 DSC Alarm Time Broadcast enabled.
2021-02-18 17:52:25.813 DSC Alarm Pinging the panel to test communication...
2021-02-18 17:52:25.815 DSC Alarm Debug ACK for cmd 000.
2021-02-18 17:52:25.815 DSC Alarm Ping was successful.
2021-02-18 17:52:25.815 DSC Alarm Requesting a full state update.
2021-02-18 17:52:25.824 DSC Alarm Debug ACK for cmd 001.
2021-02-18 17:52:25.825 DSC Alarm State update request successful, initialization complete, starting normal operation.
2021-02-18 17:52:25.825 DSC Alarm Debug Zone Number 1 Closed.
2021-02-18 17:52:25.827 DSC Alarm Debug Zone Number 2 Closed.
2021-02-18 17:52:25.828 DSC Alarm Debug Zone Number 3 Closed.
2021-02-18 17:52:25.830 DSC Alarm Debug Zone Number 4 Closed.
2021-02-18 17:52:25.832 DSC Alarm Debug Zone Number 5 Closed.
2021-02-18 17:52:25.833 DSC Alarm Debug Zone Number 6 Closed.
2021-02-18 17:52:25.835 DSC Alarm Debug Zone Number 7 Closed.
2021-02-18 17:52:25.837 DSC Alarm Debug Zone Number 8 Closed.
2021-02-18 17:52:25.838 DSC Alarm Debug Zone Number 9 Closed.
2021-02-18 17:52:25.840 DSC Alarm Debug Zone Number 10 Closed.
2021-02-18 17:52:25.843 DSC Alarm Debug Zone Number 11 Closed.
2021-02-18 17:52:25.845 DSC Alarm Debug Zone Number 12 Closed.
2021-02-18 17:52:25.847 DSC Alarm Debug Zone Number 13 Closed.
2021-02-18 17:52:25.849 DSC Alarm Debug Zone Number 14 Closed.
2021-02-18 17:52:25.850 DSC Alarm Debug Zone Number 15 Closed.
2021-02-18 17:52:25.852 DSC Alarm Debug Zone Number 16 Closed.
2021-02-18 17:52:25.853 DSC Alarm Debug Zone Number 17 Closed.
2021-02-18 17:52:25.855 DSC Alarm Debug Zone Number 18 Closed.
2021-02-18 17:52:25.860 DSC Alarm Debug Zone Number 19 Closed.
2021-02-18 17:52:25.862 DSC Alarm Debug Zone Number 20 Closed.
2021-02-18 17:52:25.865 DSC Alarm Debug Zone Number 21 Closed.
2021-02-18 17:52:25.867 DSC Alarm Debug Zone Number 22 Closed.
2021-02-18 17:52:25.869 DSC Alarm Debug Zone Number 23 Closed.
2021-02-18 17:52:26.478 DSC Alarm Debug Zone Number 24 Closed.
2021-02-18 17:52:26.479 DSC Alarm Debug Zone Number 25 Closed.
2021-02-18 17:52:26.481 DSC Alarm Debug Zone Number 26 Closed.
2021-02-18 17:52:26.485 DSC Alarm Debug Zone Number 27 Closed.
2021-02-18 17:52:26.488 DSC Alarm Debug Zone Number 28 Closed.
2021-02-18 17:52:26.488 DSC Alarm Debug Zone Number 29 Closed.
2021-02-18 17:52:26.493 DSC Alarm Debug Zone Number 30 Closed.
2021-02-18 17:52:26.493 DSC Alarm Debug Zone Number 31 Closed.
2021-02-18 17:52:26.494 DSC Alarm Debug Zone Number 32 Closed.
2021-02-18 17:52:26.494 DSC Alarm Debug Zone Number 33 Closed.
2021-02-18 17:52:26.494 DSC Alarm Debug Zone Number 34 Closed.
2021-02-18 17:52:26.494 DSC Alarm Debug Zone Number 35 Closed.
2021-02-18 17:52:26.496 DSC Alarm Debug Zone Number 36 Closed.
2021-02-18 17:52:26.496 DSC Alarm Debug Zone Number 37 Closed.
2021-02-18 17:52:26.497 DSC Alarm Debug Zone Number 38 Closed.
2021-02-18 17:52:26.497 DSC Alarm Debug Zone Number 39 Closed.
2021-02-18 17:52:26.497 DSC Alarm Debug Zone Number 40 Closed.
2021-02-18 17:52:26.497 DSC Alarm Debug Zone Number 41 Closed.
2021-02-18 17:52:26.498 DSC Alarm Debug Zone Number 42 Closed.
2021-02-18 17:52:26.498 DSC Alarm Debug Zone Number 43 Closed.
2021-02-18 17:52:26.498 DSC Alarm Debug Zone Number 44 Closed.
2021-02-18 17:52:26.499 DSC Alarm Debug Zone Number 45 Closed.
2021-02-18 17:52:26.499 DSC Alarm Debug Zone Number 46 Closed.
2021-02-18 17:52:26.499 DSC Alarm Debug Zone Number 47 Closed.
2021-02-18 17:52:27.228 DSC Alarm Debug Zone Number 48 Closed.
2021-02-18 17:52:27.229 DSC Alarm Debug Zone Number 49 Closed.
2021-02-18 17:52:27.230 DSC Alarm Debug Zone Number 50 Closed.
2021-02-18 17:52:27.230 DSC Alarm Debug Zone Number 51 Closed.
2021-02-18 17:52:27.231 DSC Alarm Debug Zone Number 52 Closed.
2021-02-18 17:52:27.231 DSC Alarm Debug Zone Number 53 Closed.
2021-02-18 17:52:27.232 DSC Alarm Debug Zone Number 54 Closed.
2021-02-18 17:52:27.233 DSC Alarm Debug Zone Number 55 Closed.
2021-02-18 17:52:27.233 DSC Alarm Debug Zone Number 56 Closed.
2021-02-18 17:52:27.234 DSC Alarm Debug Zone Number 57 Closed.
2021-02-18 17:52:27.234 DSC Alarm Debug Zone Number 58 Closed.
2021-02-18 17:52:27.235 DSC Alarm Debug Zone Number 59 Closed.
2021-02-18 17:52:27.235 DSC Alarm Debug Zone Number 60 Closed.
2021-02-18 17:52:27.236 DSC Alarm Debug Zone Number 61 Closed.
2021-02-18 17:52:27.240 DSC Alarm Debug Zone Number 62 Closed.
2021-02-18 17:52:27.240 DSC Alarm Debug Zone Number 63 Closed.
2021-02-18 17:52:27.240 DSC Alarm Debug Zone Number 64 Closed.
2021-02-18 17:52:27.241 DSC Alarm Debug Partition 1 Ready
2021-02-18 17:52:27.244 DSC Alarm Debug Partition 2 Busy.
2021-02-18 17:52:27.244 DSC Alarm Debug Partition 3 Busy.
2021-02-18 17:52:27.245 DSC Alarm Debug Partition 4 Busy.
2021-02-18 17:52:27.245 DSC Alarm Debug Partition 5 Busy.
2021-02-18 17:52:27.246 DSC Alarm Debug Partition 6 Busy.
2021-02-18 17:52:27.246 DSC Alarm Debug Partition 7 Busy.
2021-02-18 17:52:27.247 DSC Alarm Debug Partition 8 Busy.
2021-02-18 17:52:27.247 DSC Alarm Trouble Status Restore (LED OFF). (Partition 1)
2021-02-18 17:52:27.981 DSC Alarm Trouble Status Restore (LED OFF). (Partition 2)
2021-02-18 17:52:27.981 DSC Alarm Trouble Status Restore (LED OFF). (Partition 3)
2021-02-18 17:52:27.981 DSC Alarm Trouble Status Restore (LED OFF). (Partition 4)
2021-02-18 17:52:27.981 DSC Alarm Trouble Status Restore (LED OFF). (Partition 5)
2021-02-18 17:52:27.982 DSC Alarm Trouble Status Restore (LED OFF). (Partition 6)
2021-02-18 17:52:27.982 DSC Alarm Trouble Status Restore (LED OFF). (Partition 7)
2021-02-18 17:52:27.982 DSC Alarm Trouble Status Restore (LED OFF). (Partition 8)
2021-02-18 17:52:49.240 DSC Alarm Exit Delay. (Partition 1 'KeyPad')
2021-02-18 17:52:49.251 DSC Alarm Debug ID: speakTextArming
21-02-18 17:53:19.936 DSC Alarm Alarm Panel Specially Armed. (Partition 1 'KeyPad')
2021-02-18 17:53:19.950 DSC Alarm Debug ID: speakTextArmed
2021-02-18 17:53:20.093 DSC Alarm Alarm Panel Armed in Away Mode. (Partition 1 'KeyPad')
2021-02-18 17:53:20.100 Trigger Alarm Armed
2021-02-18 17:53:20.101 Action Group Alarm_Message 7783849311
2021-02-18 17:53:20.116 DSC Alarm Debug ID: speakTextArmed
[b]--->disarm occurred here with another arm following[/b]
2021-02-18 17:53:42.341 DSC Alarm Debug Partition 1 Ready
2021-02-18 17:55:13.341 DSC Alarm Exit Delay. (Partition 1 'KeyPad')
2021-02-18 17:55:13.349 DSC Alarm Debug ID: speakTextArming
2021-02-18 17:55:43.996 DSC Alarm Alarm Panel Specially Armed. (Partition 1 'KeyPad')
2021-02-18 17:55:44.018 DSC Alarm Debug ID: speakTextArmed
2021-02-18 17:55:44.133 DSC Alarm Alarm Panel Armed in Stay Mode. (Partition 1 'KeyPad')
2021-02-18 17:55:44.160 DSC Alarm Debug ID: speakTextArmed
2021-02-18 17:55:52.405 DSC Alarm Debug Partition 1 Ready
2021-02-18 17:56:08.372 DSC Alarm Debug Alarm panel time is within 1 minute of actual time, no update necessary.
2021-02-18 17:57:25.261 DSC Alarm Debug ACK for cmd 000.
2021-02-18 18:00:08.337 DSC Alarm Debug Alarm panel time is within 1 minute of actual time, no update necessary.
2021-02-18 18:00:09.206 DSC Alarm Debug Zone Number 17 Open.
Re: Q re DSC KeyFob not triggering on disarm
Posted:
Thu Feb 18, 2021 8:57 pm
by Monstergerm
Good, so plugin is responding properly to key fob by changing the states of the alarm device correctly.
I did not see the specific command I expected from the alarm panel when you disarmed. Can you go to intense debug and try again to send the log when you press the disarm on the key fob.
Re: Q re DSC KeyFob not triggering on disarm
Posted:
Thu Feb 18, 2021 9:11 pm
by hwitten
Hopefully getting you the right stuff
- Code: Select all
Feb 18, 2021 at 7:03:18 PM
DSC Alarm Log level preferences changed to "Intense Debug".
DSC Alarm Debug getConfiguration start
DSC Alarm Debug Configuration read successfully
DSC Alarm Initializing communication at address: 192.168.2.192:4025
DSC Alarm Communication established
DSC Alarm Debug RX: 5053CD
DSC Alarm Debug Received login request
DSC Alarm Debug TX: 005user54
DSC Alarm Debug RX: 5000052A
DSC Alarm Debug ACK for cmd 005.
DSC Alarm Debug RX: 5051CB
DSC Alarm Connected to Envisalink.
DSC Alarm Enabling Time Broadcast
DSC Alarm Debug TX: 0561CC
DSC Alarm Debug RX: 50005630
DSC Alarm Debug ACK for cmd 056.
DSC Alarm Time Broadcast enabled.
DSC Alarm Pinging the panel to test communication...
DSC Alarm Debug TX: 00090
DSC Alarm Debug RX: 50000025
DSC Alarm Debug ACK for cmd 000.
DSC Alarm Ping was successful.
DSC Alarm Requesting a full state update.
DSC Alarm Debug TX: 00191
DSC Alarm Debug RX: 50000126
DSC Alarm Debug ACK for cmd 001.
DSC Alarm State update request successful, initialization complete, starting normal operation.
DSC Alarm Debug RX: 61000128
DSC Alarm Debug Zone Number 1 Closed.
DSC Alarm Debug RX: 61000229
DSC Alarm Debug Zone Number 2 Closed.
DSC Alarm Debug RX: 6100032A
DSC Alarm Debug Zone Number 3 Closed.
DSC Alarm Debug RX: 6100042B
DSC Alarm Debug Zone Number 4 Closed.
DSC Alarm Debug RX: 6100052C
DSC Alarm Debug Zone Number 5 Closed.
DSC Alarm Debug RX: 6100062D
DSC Alarm Debug Zone Number 6 Closed.
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone Number 7 Closed.
DSC Alarm Debug RX: 6100082F
DSC Alarm Debug Zone Number 8 Closed.
DSC Alarm Debug RX: 61000930
DSC Alarm Debug Zone Number 9 Closed.
DSC Alarm Debug RX: 61001028
DSC Alarm Debug Zone Number 10 Closed.
DSC Alarm Debug RX: 61001129
DSC Alarm Debug Zone Number 11 Closed.
DSC Alarm Debug RX: 6100122A
DSC Alarm Debug Zone Number 12 Closed.
DSC Alarm Debug RX: 6100132B
DSC Alarm Debug Zone Number 13 Closed.
DSC Alarm Debug RX: 6100142C
DSC Alarm Debug Zone Number 14 Closed.
DSC Alarm Debug RX: 6100152D
DSC Alarm Debug Zone Number 15 Closed.
DSC Alarm Debug RX: 6100162E
DSC Alarm Debug Zone Number 16 Closed.
DSC Alarm Debug RX: 6100172F
DSC Alarm Debug Zone Number 17 Closed.
DSC Alarm Debug RX: 61001830
DSC Alarm Debug Zone Number 18 Closed.
DSC Alarm Debug RX: 61001931
DSC Alarm Debug Zone Number 19 Closed.
DSC Alarm Debug RX: 61002029
DSC Alarm Debug Zone Number 20 Closed.
DSC Alarm Debug RX: 6100212A
DSC Alarm Debug Zone Number 21 Closed.
DSC Alarm Debug RX: 6100222B
DSC Alarm Debug Zone Number 22 Closed.
DSC Alarm Debug RX: 6100232C
DSC Alarm Debug Zone Number 23 Closed.
DSC Alarm Debug RX: 6100242D
DSC Alarm Debug Zone Number 24 Closed.
DSC Alarm Debug RX: 6100252E
DSC Alarm Debug Zone Number 25 Closed.
DSC Alarm Debug RX: 6100262F
DSC Alarm Debug Zone Number 26 Closed.
DSC Alarm Debug RX: 61002730
DSC Alarm Debug Zone Number 27 Closed.
DSC Alarm Debug RX: 61002831
DSC Alarm Debug Zone Number 28 Closed.
DSC Alarm Debug RX: 61002932
DSC Alarm Debug Zone Number 29 Closed.
DSC Alarm Debug RX: 6100302A
DSC Alarm Debug Zone Number 30 Closed.
DSC Alarm Debug RX: 6100312B
DSC Alarm Debug Zone Number 31 Closed.
DSC Alarm Debug RX: 6100322C
DSC Alarm Debug Zone Number 32 Closed.
DSC Alarm Debug RX: 6100332D
DSC Alarm Debug Zone Number 33 Closed.
DSC Alarm Debug RX: 6100342E
DSC Alarm Debug Zone Number 34 Closed.
DSC Alarm Debug RX: 6100352F
DSC Alarm Debug Zone Number 35 Closed.
DSC Alarm Debug RX: 61003630
DSC Alarm Debug Zone Number 36 Closed.
DSC Alarm Debug RX: 61003731
DSC Alarm Debug Zone Number 37 Closed.
DSC Alarm Debug RX: 61003832
DSC Alarm Debug Zone Number 38 Closed.
DSC Alarm Debug RX: 61003933
DSC Alarm Debug Zone Number 39 Closed.
DSC Alarm Debug RX: 6100402B
DSC Alarm Debug Zone Number 40 Closed.
DSC Alarm Debug RX: 6100412C
DSC Alarm Debug Zone Number 41 Closed.
DSC Alarm Debug RX: 6100422D
DSC Alarm Debug Zone Number 42 Closed.
DSC Alarm Debug RX: 6100432E
DSC Alarm Debug Zone Number 43 Closed.
DSC Alarm Debug RX: 6100442F
DSC Alarm Debug Zone Number 44 Closed.
DSC Alarm Debug RX: 61004530
DSC Alarm Debug Zone Number 45 Closed.
DSC Alarm Debug RX: 61004631
DSC Alarm Debug Zone Number 46 Closed.
DSC Alarm Debug RX: 61004732
DSC Alarm Debug Zone Number 47 Closed.
DSC Alarm Debug RX: 61004833
DSC Alarm Debug Zone Number 48 Closed.
DSC Alarm Debug RX: 61004934
DSC Alarm Debug Zone Number 49 Closed.
DSC Alarm Debug RX: 6100502C
DSC Alarm Debug Zone Number 50 Closed.
DSC Alarm Debug RX: 6100512D
DSC Alarm Debug Zone Number 51 Closed.
DSC Alarm Debug RX: 6100522E
DSC Alarm Debug Zone Number 52 Closed.
DSC Alarm Debug RX: 6100532F
DSC Alarm Debug Zone Number 53 Closed.
DSC Alarm Debug RX: 61005430
DSC Alarm Debug Zone Number 54 Closed.
DSC Alarm Debug RX: 61005531
DSC Alarm Debug Zone Number 55 Closed.
DSC Alarm Debug RX: 61005632
DSC Alarm Debug Zone Number 56 Closed.
DSC Alarm Debug RX: 61005733
DSC Alarm Debug Zone Number 57 Closed.
DSC Alarm Debug RX: 61005834
DSC Alarm Debug Zone Number 58 Closed.
DSC Alarm Debug RX: 61005935
DSC Alarm Debug Zone Number 59 Closed.
DSC Alarm Debug RX: 6100602D
DSC Alarm Debug Zone Number 60 Closed.
DSC Alarm Debug RX: 6100612E
DSC Alarm Debug Zone Number 61 Closed.
DSC Alarm Debug RX: 6100622F
DSC Alarm Debug Zone Number 62 Closed.
DSC Alarm Debug RX: 61006330
DSC Alarm Debug Zone Number 63 Closed.
DSC Alarm Debug RX: 61006431
DSC Alarm Debug Zone Number 64 Closed.
DSC Alarm Debug RX: 6501CC
DSC Alarm Debug Partition 1 Ready
DSC Alarm Debug Updating state ReadyState for keypad on partition 1 to ready.
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to on.
DSC Alarm Debug RX: 6732D2
DSC Alarm Debug Partition 2 Busy.
DSC Alarm Debug RX: 6733D3
DSC Alarm Debug Partition 3 Busy.
DSC Alarm Debug RX: 6734D4
DSC Alarm Debug Partition 4 Busy.
DSC Alarm Debug RX: 6735D5
DSC Alarm Debug Partition 5 Busy.
DSC Alarm Debug RX: 6736D6
DSC Alarm Debug Partition 6 Busy.
DSC Alarm Debug RX: 6737D7
DSC Alarm Debug Partition 7 Busy.
DSC Alarm Debug RX: 6738D8
DSC Alarm Debug Partition 8 Busy.
DSC Alarm Debug RX: 8411CE
DSC Alarm Trouble Status Restore (LED OFF). (Partition 1)
DSC Alarm Debug Updating state LEDTrouble for keypad on partition 1 to off.
DSC Alarm Debug RX: 8412CF
DSC Alarm Trouble Status Restore (LED OFF). (Partition 2)
DSC Alarm Debug Updating state LEDTrouble for keypad on partition 2 to off.
DSC Alarm Debug RX: 8413D0
DSC Alarm Trouble Status Restore (LED OFF). (Partition 3)
DSC Alarm Debug Updating state LEDTrouble for keypad on partition 3 to off.
DSC Alarm Debug RX: 8414D1
DSC Alarm Trouble Status Restore (LED OFF). (Partition 4)
DSC Alarm Debug Updating state LEDTrouble for keypad on partition 4 to off.
DSC Alarm Debug RX: 8415D2
DSC Alarm Trouble Status Restore (LED OFF). (Partition 5)
DSC Alarm Debug Updating state LEDTrouble for keypad on partition 5 to off.
DSC Alarm Debug RX: 8416D3
DSC Alarm Trouble Status Restore (LED OFF). (Partition 6)
DSC Alarm Debug Updating state LEDTrouble for keypad on partition 6 to off.
DSC Alarm Debug RX: 8417D4
DSC Alarm Trouble Status Restore (LED OFF). (Partition 7)
DSC Alarm Debug Updating state LEDTrouble for keypad on partition 7 to off.
DSC Alarm Debug RX: 8418D5
DSC Alarm Trouble Status Restore (LED OFF). (Partition 8)
DSC Alarm Debug Updating state LEDTrouble for keypad on partition 8 to off.
DSC Alarm Debug RX: 51081FF
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to on.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDTrouble for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDMemory for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDBypass for keypad on partition 1 to off.
DSC Alarm Debug RX: 550190402182196
DSC Alarm Debug Alarm panel time is within 1 minute of actual time, no update necessary.
DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to Date Time .
DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to FEB 18/21 7:04p.
DSC Alarm Debug RX: 5108B10
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to on.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to on.
DSC Alarm Debug Updating state LEDTrouble for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDMemory for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDBypass for keypad on partition 1 to on.
DSC Alarm Debug RX: 6561D2
DSC Alarm Exit Delay. (Partition 1 'KeyPad')
DSC Alarm Debug Updating state state for keypad on partition 1 to exitDelay.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to on.
DSC Alarm Debug Updating state LEDMemory for keypad on partition 1 to off.
DSC Alarm Debug ID: speakTextArming
Feb 18, 2021 at 7:04:39 PM
DSC Alarm Debug RX: 5108A0F
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to on.
DSC Alarm Debug Updating state LEDTrouble for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDMemory for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDBypass for keypad on partition 1 to on.
DSC Alarm Debug RX: 7011C9
DSC Alarm Alarm Panel Specially Armed. (Partition 1 'KeyPad')
DSC Alarm Debug Updating state state for keypad on partition 1 to armed.
DSC Alarm Debug Updating state ReadyState for keypad on partition 1 to notready.
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to on.
DSC Alarm Debug ID: speakTextArmed
DSC Alarm Debug RX: 65211FF
DSC Alarm Alarm Panel Armed in Stay Mode. (Partition 1 'KeyPad')
DSC Alarm Debug Updating state ArmedState for keypad on partition 1 to stay.
DSC Alarm Debug Updating state LEDBypass for keypad on partition 1 to on.
DSC Alarm Debug <<-- entering triggerEvent: armedStay
DSC Alarm Debug Updating state state for keypad on partition 1 to armed.
DSC Alarm Debug Updating state ReadyState for keypad on partition 1 to notready.
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to on.
DSC Alarm Debug ID: speakTextArmed
DSC Alarm Debug RX: 51081FF
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to on.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDTrouble for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDMemory for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDBypass for keypad on partition 1 to off.
DSC Alarm Debug RX: 6551D1
DSC Alarm Debug Updating state state for keypad on partition 1 to disarmed.
DSC Alarm Debug Updating state ArmedState for keypad on partition 1 to disarmed.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to off.
DSC Alarm Debug Updating state PanicState for keypad on partition 0 to none.
DSC Alarm Debug Updating state ReadyState for keypad on partition 1 to ready.
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to on.
DSC Alarm Debug Updating state LEDBypass for keypad on partition 1 to off.
DSC Alarm Debug RX: 6501CC
DSC Alarm Debug Partition 1 Ready
DSC Alarm Debug Updating state ReadyState for keypad on partition 1 to ready.
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to on.
Re: Q re DSC KeyFob not triggering on disarm
Posted:
Fri Feb 19, 2021 12:57 pm
by Monstergerm
According to the Envisalink TPI a key fob opening should trigger command 751 "special opening by keyswitch". The problem is that the alarm panel did not send command 751, so the plugin is not reporting the disarm event. This appears to be a bug and has been reported on Envisalink and HomeSeer messaging boards as recently as last November.
So, there is not much we can do. However, I see that the alarm panel is sending command 655 when you disarm with the key fob (I assume you disarmed after the system was fully armed - not still in exit delay). If you are familiar with python programming we can add a line to the code to generate a log message for this event.
Re: Q re DSC KeyFob not triggering on disarm
Posted:
Fri Feb 19, 2021 1:09 pm
by hwitten
However, I see that the alarm panel is sending command 655 when you disarm with the key fob (I assume you disarmed after the system was fully armed - not still in exit delay). If you are familiar with python programming we can add a line to the code to generate a log message for this event.
Somewhat familiar with python but far from expert
Would I be able to build a trigger action on that 655?
I use the key fob to disarm from the car upon returning home and look for confirmation on Apple Watch before opening garage door. I get that via Envisalink but much nicer with an iMessage via Indigo.
Re: Q re DSC KeyFob not triggering on disarm
Posted:
Fri Feb 19, 2021 4:45 pm
by Monstergerm
Making the changes for the log entry is easy, but you will then get duplicate entries if you use the keypad to disarm your alarm.
However, the plugin has turned off DSC alarm event triggers after receiving command 655. Command 750 is the main disarm command that handles all these events. In your case with the key fob you don't get 750 but were supposed to get 751.
Anyway, if you want to setup a trigger, I suggest to use DSC device state changes instead of DSC alarm events. This should work in your case regardless of which disarm method you use.
Setup a trigger ...
Type: Device State Changed
Device: Your DSC alarm device
Trigger: Armed State Changed to Disarmed
Let me know if this solves your problem.
Re: Q re DSC KeyFob not triggering on disarm
Posted:
Fri Feb 19, 2021 5:43 pm
by hwitten
[quote]Let me know if this solves your problem./quote]
Duh... yes, that should work nicely. Thank you.
Re: Q re DSC KeyFob not triggering on disarm
Posted:
Sat Feb 20, 2021 11:42 am
by Monstergerm
I was thinking, another small problem in your case is that the state for bypassed zones will not be properly updated if you disarm your system with the key fob.
If you want you can replace code lines 1377-1383 in plugin.py file
- Code: Select all
if partition == 1 and keypstate == kAlarmStateExitDelay:
self.mylogger.log(1, u"Alarm Disarmed. (Partition %d '%s')" % (partition, keyp))
#Only request bypassed zone list if we are not using IT-100
if self.useSerial is False:
self.sleep(1) #add delay if keybus buffer overruns. Only send partition 1 cmd since other partitions don't work
self.txCmdList.append((kCmdNormal, '071' + str(partition) + '*1#')) #triggers cmd 616 only if partition was in exit delay and cmd 750 is not sent.
with these lines. This will create duplicate log entries for regular disarms but will take care of the bypassed zone states.
- Code: Select all
self.mylogger.log(1, u"Alarm Disarmed. (Partition %d '%s')" % (partition, keyp))
self.mylogger.log(2, u"Bypass Cancelled for all Zones by DSC")
for i in range(64):
self.updateZoneBypass(i, kZoneBypassNo)
Re: Q re DSC KeyFob not triggering on disarm
Posted:
Sat Feb 20, 2021 12:49 pm
by hwitten
For me it works as needed without the mods. We only arm when away and do that usually at the keypad. We usually don't bypass any zones so all is well.
Thank you very much. Had I realized earlier how much functionality the PlugIn added I would have upgraded the PC3000 long ago. The silver lining in having it fail