DSC Alarm Debug RX: 90400330
DSC Alarm Debug Beep Status
DSC Alarm Debug RX: 6561D2
DSC Alarm Exit Delay. (Partition 1 'House')
DSC Alarm Debug Updating state state for keypad on partition 1 to exitDelay.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to on.
DSC Alarm Debug Updating state LEDMemory for keypad on partition 1 to off.
DSC Alarm Debug ID: speakTextArming
DSC Alarm Debug RX: 90321FF
DSC Alarm Debug LED 'Armed' is 'on'.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to on.
DSC Alarm Debug RX: 9034101
DSC Alarm Debug LED 'Bypass' is 'on'.
DSC Alarm Debug Updating state LEDBypass for keypad on partition 1 to on.
DSC Alarm Debug RX: 90100032Exit Delay in Progress E4
DSC Alarm Debug LCD Update, Line 1:'Exit Delay in ' Line 2:'Progress '
DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to Exit Delay in .
DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to Progress .
DSC Alarm Debug RX: 6100032A
DSC Alarm Debug Zone number 3 Closed.
DSC Alarm Debug RX: 905010160
DSC Alarm Debug Tone Status
DSC Alarm Debug RX: 9034000
DSC Alarm Debug LED 'Bypass' is 'off'.
DSC Alarm Debug Updating state LEDBypass for keypad on partition 1 to off.
DSC Alarm Debug RX: 61000128
DSC Alarm Debug Zone number 1 Closed.
Trigger Motion: Hall - Front Door Closed
DSC Alarm Alarm Zone 'Hall - Front Door Sensor' Closed.
DSC Alarm Debug RX: 905030162
DSC Alarm Debug Tone Status
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
DSC Alarm Debug RX: 65210FE
DSC Alarm Alarm Panel Armed in Away Mode. (Partition 1 'House')
DSC Alarm Debug Updating state ArmedState for keypad on partition 1 to away.
Trigger Alarm: State Changes
DSC Alarm Debug <<-- entering triggerEvent: armedAway
Trigger Alarm: Armed in Away Mode
Action Group Lighting: Mockupancy On
Action Group Lighting: All Off
Action Group Lounge - Turn All Off (Inc Media)
Action Group Lounge - Turn All Off (Ex Media)
Action Group Lounge - Switch To None (All Off)
Action Group Cameras: Make All Active
Ignored device "Lounge - Camera" action request (communication is disabled)
Action Group Heating: Set All Away
DSC Alarm Debug Updating state state for keypad on partition 1 to armed.
DSC Alarm Debug Updating state ReadyState for keypad on partition 1 to notready.
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to on.
DSC Alarm Debug ID: speakTextArmed
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
Z-Wave sent "Lounge - Main Light" off
Z-Wave sent "Lounge - Side Lights" off
Z-Wave sent "Lounge - Ambient Lights" off
DSC Alarm Debug RX: 90310FD
DSC Alarm Debug LED 'Ready' is 'off'.
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to off.
DSC Alarm Debug RX: 90100032System Armed in Away Mode <>85
DSC Alarm Debug LCD Update, Line 1:'System Armed ' Line 2:' in Away Mode '
DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to System Armed .
DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to in Away Mode .
DSC Alarm Debug RX: 55014480902169D
DSC Alarm Debug Alarm panel time is within 1 minute of actual time, no update necessary.
DSC Alarm Debug RX: 90500005E
DSC Alarm Debug Tone Status
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
Autolog Stella-Z Heat setpoint altered to 19.0 for 'Lounge - Heating Control'
Schedule Alarm: Armed in Away Mode (delayed action)
Autolog Stella-Z Heat setpoint altered to 18.0 for 'Dining - Heating Control'
Schedule Alarm: Armed in Away Mode (delayed action)
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
Autolog Stella-Z Heat setpoint altered to 14.0 for 'Utility - Heating Control'
Schedule Alarm: Armed in Away Mode (delayed action)
Action Group Bedroom 1 - Mood: All Lights Off (Inc Media)
Schedule Alarm: Armed in Away Mode (delayed action)
Script Error embedded script: expected an indented block
Script Error around line 1 - "#turn off tv"
Z-Wave sent "Bedroom 1 - Mike's Light" off
Z-Wave sent "Bedroom 1 - Claire's Light" off
Z-Wave sent "Bedroom 1 - Main Light" off
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
DSC Alarm Debug RX: 55014480902169D
DSC Alarm Debug Alarm panel time is within 1 minute of actual time, no update necessary.
DSC Alarm Debug RX: 7011C9
DSC Alarm Alarm Panel Specially Armed. (Partition 1 'House')
DSC Alarm Debug Updating state state for keypad on partition 1 to armed.
DSC Alarm Debug Updating state ReadyState for keypad on partition 1 to notready.
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to off.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to on.
DSC Alarm Debug ID: speakTextArmed
Schedule Alarm: Armed in Away Mode (delayed action)
DSC Alarm Debug RX: 55014480902169D
DSC Alarm Debug Alarm panel time is within 1 minute of actual time, no update necessary.
Autolog Stella-Z Heat setpoint altered to 14.0 for 'Bathroom - Heating Control'
Schedule Alarm: Armed in Away Mode (delayed action)
Autolog Stella-Z Heat setpoint altered to 14.0 for 'Bedroom 2 - Heating Control'
Autolog Stella-Z Heat setpoint altered to 14.0 for 'Study - Heating Control'
Schedule Alarm: Armed in Away Mode (delayed action)
Action Group Kitchen Diner - Mood - Turn Off All Lights
Schedule Alarm: Armed in Away Mode (delayed action)
Schedule Alarm: Armed in Away Mode (delayed action)
Z-Wave sent "Kitchen - Worktop Counter Lights" off
Z-Wave sent "Kitchen - Main Light" off
Autolog Stella-Z Heat setpoint altered to 10.0 for 'Gym - Heating Control'
Autolog Stella-Z Heat setpoint altered to 10.0 for 'WC - Heating Control'
Schedule Alarm: Armed in Away Mode (delayed action)
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
Z-Wave sent "Dining - Main Light" off
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
Schedule Alarm: Armed in Away Mode (delayed action)
Action Group Landing - Turn Off All Lights
Z-Wave sent "Landing - Light" off
DSC Alarm Debug RX: 90100032 Date Time SEP 02/16 2:48p24
DSC Alarm Debug LCD Update, Line 1:' Date Time ' Line 2:'SEP 02/16 2:48p'
DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to Date Time .
DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to SEP 02/16 2:48p.
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
Schedule Alarm: Armed in Away Mode (delayed action)
Action Group Loft - Turn Off All Lights
Z-Wave sent "Loft - Lighting" off
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
Ignored device "Bedroom 1 - Heating Control" action request (communication is disabled)
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
2 Sep 2016, 14:49:19
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
DSC Alarm Debug RX: 90100032 Date Time SEP 02/16 2:49p25
DSC Alarm Debug LCD Update, Line 1:' Date Time ' Line 2:'SEP 02/16 2:49p'
DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to Date Time .
DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to SEP 02/16 2:49p.
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
Schedule _delayed_action_2926
Schedule _delayed_action_2928
Z-Wave sent "Kitchen - Worktop Counter Lights" off
Z-Wave sent "Kitchen - Main Light" off
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
DSC Alarm Debug RX: 60900736
DSC Alarm Debug Zone number 7 Open.
Z-Wave sent "Garage - Light" on
DSC Alarm Debug RX: 6100072E
DSC Alarm Debug Zone number 7 Closed.
DSC Alarm Debug RX: 60900130
DSC Alarm Debug Zone number 1 Open.
DSC Alarm Alarm Zone 'Hall - Front Door Sensor' Opened.
DSC Alarm Debug RX: 6571D3
DSC Alarm Entry Delay. (Partition 1 'House')
DSC Alarm Debug Updating state state for keypad on partition 1 to entryDelay.
DSC Alarm Debug ID: speakTextEntryDelay
DSC Alarm Debug RX: 90100032Entry is Active Disarm System 9E
DSC Alarm Debug LCD Update, Line 1:'Entry is Active ' Line 2:'Disarm System '
DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to Entry is Active .
DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to Disarm System .
DSC Alarm Debug RX: 90510005F
DSC Alarm Debug Tone Status
DSC Alarm Debug RX: 60900332
DSC Alarm Debug Zone number 3 Open.
DSC Alarm Debug RX: 6100032A
DSC Alarm Debug Zone number 3 Closed.
DSC Alarm Debug RX: 60900332
DSC Alarm Debug Zone number 3 Open.
DSC Alarm Debug RX: 90400330
DSC Alarm Debug Beep Status
DSC Alarm Debug RX: 6551D1
DSC Alarm Debug Updating state state for keypad on partition 1 to disarmed.
Trigger Alarm: Disarmed
Action Group Lighting: Mockupancy Off
Action Group Heating: Set All General
DSC Alarm Debug Updating state ArmedState for keypad on partition 1 to disarmed.
Ignored device "Gym - Main Light" action request (communication is disabled)
Trigger Alarm: State Changes
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to off.
DSC Alarm Debug Updating state PanicState for keypad on partition 0 to none.
DSC Alarm Debug Updating state ReadyState for keypad on partition 1 to ready.
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to on.
DSC Alarm Debug Updating state LEDBypass for keypad on partition 1 to off.
DSC Alarm Debug RX: 90311FE
DSC Alarm Debug LED 'Ready' is 'on'.
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to on.
DSC Alarm Debug RX: 90320FE
DSC Alarm Debug LED 'Armed' is 'off'.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to off.
Z-Wave sent "Bedroom 1 - Claire's Light" off
DSC Alarm Debug RX: 90100032System Disarmed No Alarm Memory 00
DSC Alarm Debug LCD Update, Line 1:'System Disarmed ' Line 2:'No Alarm Memory '
DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to System Disarmed .
DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to No Alarm Memory .
Z-Wave sent "Ensuite - Light" off
Z-Wave sent "Study - Desk Light" off
Z-Wave sent "Landing - Light" off
Z-Wave sent "Bathroom - Light" off
DSC Alarm Debug RX: 55014490902169E
DSC Alarm Debug Alarm panel time is within 1 minute of actual time, no update necessary.
DSC Alarm Debug RX: 90500005E
DSC Alarm Debug Tone Status
Autolog Stella-Z Heat setpoint altered to 20.0 for 'Lounge - Heating Control'
DSC Alarm Debug RX: 55014490902169E
DSC Alarm Debug Alarm panel time is within 1 minute of actual time, no update necessary.
Schedule Alarm: Disarmed (delayed action)
DSC Alarm Debug RX: 7511CE
DSC Alarm Alarm Disarmed by Special Opening (Partition 1 'House')
Autolog Stella-Z Heat setpoint altered to 18.5 for 'Dining - Heating Control'
Schedule Alarm: Disarmed (delayed action)
Autolog Stella-Z Heat setpoint altered to 14.0 for 'Utility - Heating Control'
Schedule Alarm: Disarmed (delayed action)
Autolog Stella-Z Heat setpoint altered to 14.0 for 'Bathroom - Heating Control'
Schedule Alarm: Disarmed (delayed action)
DSC Alarm Debug RX: 6531CF
DSC Alarm Debug RX: 90100032Secure or Arm System <>96
DSC Alarm Debug LCD Update, Line 1:'Secure or ' Line 2:' Arm System '
DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to Secure or .
DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to Arm System .
DSC Alarm Debug RX: 60902536
DSC Alarm Debug Zone number 25 Open.
Autolog Stella-Z Heat setpoint altered to 14.0 for 'Bedroom 2 - Heating Control'
Schedule Alarm: Disarmed (delayed action)
DSC Alarm Debug RX: 6100032A
DSC Alarm Debug Zone number 3 Closed.
Autolog Stella-Z Heat setpoint altered to 14.0 for 'Study - Heating Control'
Schedule Alarm: Disarmed (delayed action)
DSC Alarm Debug RX: 60903739
DSC Alarm Debug Zone number 37 Open.
Schedule Alarm: Disarmed (delayed action)
Autolog Stella-Z Heat setpoint altered to 10.0 for 'Gym - Heating Control'
Autolog Stella-Z Heat setpoint altered to 14.0 for 'WC - Heating Control'
DSC Alarm Debug RX: 6100252E
DSC Alarm Debug Zone number 25 Closed.
DSC Alarm Debug RX: 90100032 Date Time SEP 02/16 2:50p1D
DSC Alarm Debug LCD Update, Line 1:' Date Time ' Line 2:'SEP 02/16 2:50p'
DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to Date Time .
DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to SEP 02/16 2:50p.
DSC Alarm Debug RX: 61003731
DSC Alarm Debug Zone number 37 Closed.
Monstergerm wrote:Have you tried restarting the Indigo Server?
I once had a problem with a plugin causing xml errors and it went away after a restart. Also you can try fresh install of plugin and restart of computer.
Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)
Error (client) timeout waiting for plugin response from com.frightideas.indigoplugin.dscAlarm for request CalcDeviceFunc
Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)
Error (client) timeout waiting for plugin response from com.frightideas.indigoplugin.dscAlarm for request UiGetValues2
Sep 10, 2016, 5:52:01 PM
DSC Alarm Debug RX: 55017520910169A
DSC Alarm Debug Alarm panel time is within 1 minute of actual time, no update necessary.
DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to Date Time .
DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to SEP 10/16 5:52p.
DSC Alarm Debug validating Device Config called
Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)
Error (client) timeout waiting for plugin response from com.frightideas.indigoplugin.dscAlarm for request CalcDeviceFunc
Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)
Users browsing this forum: No registered users and 5 guests