I live in US so I bought mine from AVoutlet here:
http://www.avoutlet.com/index.php?dispa ... ct_id=4476I made two attempts at setting it up in Indigo. It did not work for me.
First you are supposed to set the upper and lower limits of the motors using a Somfy RTS remote. Next you have to associate the ZRTSI RTS signals with the motors' RTS signals. One can either associate all motors to the same channel or alternatively associate each motor with its own ZRTSI RTS channel. There is a way to check how well this part of the association works, meaning you can use the ZRTSI setup button to determine whether your motors respond directly to the commands sent by ZRTSI. Next is the Z-wave integration between ZRTSI and the Indigo. First you have to add the ZRTSI to your serial controller. In my case it is an Aeon Labs USB stick. That seems to work fine for me. After I do that and make an attempt at adding a new device in Indigo, the ZRTSI is assigned a node and synchronizes but as a "static controller" without any controls being available for the device.
I would be also very interested to know how others integrated the ZRTSI in Indigo since it may be something that I am doing wrong.