I'm still using Indigo 2012.2 and have configured three (3) of these to match the RAW packets received, thanks for that Matt. I even went as far to test with some Smoke Detector Tester Spray, just to be 100% sure they were configured correctly.
As I read thru this thread again, the PDF shared suggested that CO Alarms can be distinguished from Fire Alarms with:
Command Class
Notification (0x71)
Notification Type
CO(0x02)
Notification Event
0x02
Would the following catch a CO Alarm based on that?
- Code: Select all
* 0x71 0x05 0x00 0x00 0x00 0xFF 0x02 0x02 *