1132CU

I am using the PowerLinc 1132CU with Mac OS 10.3.4. Some Time/Date and manual triggers work with Indigo and other do not. The Indigo program and log shows manual on/off triggers, but the X-10 modules do not activate. However, all X-10 modues activate when a remote X-10 handheld is used. I have tried changing the X-10 modules but that did not help. Any suggestions? Thanks. Sonny

[matt (support)]

Hello Sonny,

This is a X10 signal problem. The remote handheld is probably working because the RF transceiver is plugged into a different outlet, meaning the signal path from the transceiver to the modules is different than when the PowerLinc is used. In this case, the signal path from the Transceiver->modules is better or cleaner than the signal path from the PowerLinc->modules. Try plugging the PowerLinc into a different outlet. You might need a X10 filter or repeater if this does not help.

Here is a similar forum post:

http://www.perceptiveautomation.com/php ... .php?t=233

Regards,
Matt