Hi
I've had my indigo/insteon system working fine for the past few years. Due to our little one growing up, we had to swap the office and baby room. Now my computer and the PLM are no longer in the 'center' of the house, but instead moved over to the very edge of the house, along the outside wall.
I'm having communication issues with different switches, mainly acknowledgement errors. When events are triggered with motion sensors, they don't always work, but when I manually turn something on, it always works... seems really strange. Is there a fix for this? I've tried the 0.02 minute delay and it works only slightly better.
I've tried isolating noise, but it's very random and hard to isolate. When just the computer and light breakers are ON, things work fine. But once other breakers to the house are turned on, the triggered lights only sometimes work. I've tries multiple times, on multiple days, at multiple hours turning OFF all the breakers , and slowly turning them back ON, one at a time. And the results are not consistent.
Can I use an oscilloscope to figure out what the line noise is. Or at what levels they start to interfere with communication. I don't have a scope, but can borrow one. Is there a specific frequency I'm looking for?
FYI, I have Filterlinc on all UPS's, and my large applicances (TV's, Computers, Home Theater Equipment) are all on those UPSes.
Thanks