New Sensors not populating data

I had an older RFXSensor and got 2 new ones the other day to go with a new RFXtrx433. I've installed the transceiver and that part is working fine. I added my older RFXSensor, all good at this point. Temp and Humidity updating fine. I then added in the 2 additional sensors, one of which is showing 5C temp and 95% humidity, which its no where near as i'm in the bedroom, temp is approx 20C. The other sensor is blank and hasn't updated any values. I added the sensors by there id in the log and am just wondering if there is anything additional that needs to be done for having multiple sensors.
FW version is 46 on the RFXtrx433.

Can you send me some data from your event log, so I can see what happens....
Something like this:

RFXCOM Debug processing: 10 113 0 202 0 240 0 114 173 122 96 (0A 71 00 CA 00 F0 00 72 AD 7A 60)
RFXCOM Debug RFXMeter 240 with subtype 0
RFXCOM Debug Data: 0 114 173 122
RFXCOM Debug RFXMeter 240 in list
RFXCOM Debug check if new day: last date 2012/08/23, new date 2012/08/23
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 10 113 0 203 1 241 0 2 72 237 96 (0A 71 00 CB 01 F1 00 02 48 ED 60)
RFXCOM Debug RFXMeter 497 with subtype 0
RFXCOM Debug Data: 0 2 72 237
RFXCOM Debug RFXMeter 497 in list
RFXCOM Debug check if new day: last date 2012/08/23, new date 2012/08/23

Hi, please see sense data. Sensor id 0 is the old sensor that I have


23 Aug 2012 09:21:17
RFXCOM Debug getConfiguration start
RFXCOM initializing communication on port /dev/cu.usbserial-05VM7VS7 at speed 38400
RFXCOM Debug serial port opened
RFXCOM Debug send reset cmd: 13 0 0 0 0 0 0 0 0 0 0 0 0 0 (0D 00 00 00 00 00 00 00 00 00 00 00 00 00)
RFXCOM Debug send init cmd: 13 0 0 1 2 0 0 0 0 0 0 0 0 0 (0D 00 00 01 02 00 00 00 00 00 00 00 00 00)
RFXCOM Debug rcvd init reply: 13 1 0 1 2 83 46 0 0 1 1 0 0 0 (0D 01 00 01 02 53 2E 00 00 01 01 00 00 00)
RFXCOM connected to RFXtrx 433.92 MHz, firmware version 46
RFXCOM currently enabled receiver protocols: X10
RFXCOM enabling undecoded packet displaying
RFXCOM Debug send set mode cmd: 13 0 0 2 3 83 0 128 0 1 0 0 0 0 (0D 00 00 02 03 53 00 80 00 01 00 00 00 00)
RFXCOM Debug rcvd set mode reply: 13 1 0 2 3 83 46 128 0 1 1 0 0 0 (0D 01 00 02 03 53 2E 80 00 01 01 00 00 00)

23 Aug 2012 09:22:49
RFXCOM Debug processing: 7 112 0 0 0 8 52 80 (07 70 00 00 00 08 34 50)
RFXCOM Debug RFXSensor 0 with subtype 0 and value 2100
RFXCOM Debug Data1: 7 112 0 0 0 8 52 80
RFXCOM Debug RFXSensor 0 in list
RFXCOM Debug UpdateMinMax state temperature value 21.0
RFXCOM Debug check if new day: last date 2012/08/23, new date 2012/08/23
RFXCOM Debug Setting display value to TempHumid
RFXCOM Debug ++++++++++++++

Except that I don't expect a sensor 0 this looks good
I'm more curious to see data from one of the sensors that don't work.

That's the problem, they don't seem to be sending much data, they did an initial packet send and the plugin picked them up and gave me the new id's but since then, one has sent no data and one seems to have sent another packet with incorrect temp and humidity value

Any suggestions on where to go from here ? Is there anything else i can do to get the RFX Sensors to send data ? or any debugging i can enable in the RFXTRX ?

This is what i got when i powered on the second RFXSensor, seems to have the same ID


29 Aug 2012 20:25:58
RFXCOM Debug processing: 8 3 12 5 32 82 70 51 10 (08 03 0C 05 20 52 46 33 0A)
RFXCOM Error undecoded packet received: 08 03 0C 05 20 52 46 33 0A
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 8 3 12 6 32 82 70 51 10 (08 03 0C 06 20 52 46 33 0A)
RFXCOM Error undecoded packet received: 08 03 0C 06 20 52 46 33 0A
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 9 3 12 7 40 83 69 78 0 38 (09 03 0C 07 28 53 45 4E 00 26)
RFXCOM Error undecoded packet received: 09 03 0C 07 28 53 45 4E 00 26
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 10 3 12 8 48 158 37 90 1 0 0 (0A 03 0C 08 30 9E 25 5A 01 00 00)
RFXCOM Error undecoded packet received: 0A 03 0C 08 30 9E 25 5A 01 00 00
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 7 112 0 9 0 7 233 128 (07 70 00 09 00 07 E9 80)
RFXCOM Debug RFXSensor 0 with subtype 0 and value 2025
RFXCOM Debug Data1: 7 112 0 9 0 7 233 128
RFXCOM Debug RFXSensor 0 in list
RFXCOM Debug UpdateMinMax state temperature value 20.25
RFXCOM Debug check if new day: last date 2012/08/29, new date 2012/08/29
RFXCOM Debug Setting display value to TempHumid
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 7 112 2 10 0 1 247 128 (07 70 02 0A 00 01 F7 80)
RFXCOM Debug RFXSensor 0 with subtype 2 and value 503
RFXCOM Debug Data1: 7 112 2 10 0 1 247 128
RFXCOM Debug RFXSensor 0 in list
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 7 112 1 11 0 0 20 128 (07 70 01 0B 00 00 14 80)
RFXCOM Debug RFXSensor 0 with subtype 1 and value 20
RFXCOM Debug Data1: 7 112 1 11 0 0 20 128
RFXCOM Debug RFXSensor 0 in list
RFXCOM Debug RFXSensor read values: value=20 temperature=20 (C)
RFXCOM Debug Setting display value to TempHumid
RFXCOM Debug ++++++++++++++


And then when i powered the third, with one and two still powered at this stage


29 Aug 2012 20:28:37
RFXCOM Debug processing: 8 3 12 13 32 82 70 51 10 (08 03 0C 0D 20 52 46 33 0A)
RFXCOM Error undecoded packet received: 08 03 0C 0D 20 52 46 33 0A
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 9 3 12 14 40 83 69 78 0 38 (09 03 0C 0E 28 53 45 4E 00 26)
RFXCOM Error undecoded packet received: 09 03 0C 0E 28 53 45 4E 00 26
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 10 3 12 15 48 151 232 85 1 0 0 (0A 03 0C 0F 30 97 E8 55 01 00 00)
RFXCOM Error undecoded packet received: 0A 03 0C 0F 30 97 E8 55 01 00 00
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 7 112 0 16 0 7 170 128 (07 70 00 10 00 07 AA 80)
RFXCOM Debug RFXSensor 0 with subtype 0 and value 1962
RFXCOM Debug Data1: 7 112 0 16 0 7 170 128
RFXCOM Debug RFXSensor 0 in list
RFXCOM Debug UpdateMinMax state temperature value 19.62
RFXCOM Debug check if new day: last date 2012/08/29, new date 2012/08/29
RFXCOM Debug Setting display value to TempHumid
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 8 3 12 17 32 82 70 51 10 (08 03 0C 11 20 52 46 33 0A)
RFXCOM Error undecoded packet received: 08 03 0C 11 20 52 46 33 0A
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 9 3 12 18 40 83 69 78 0 38 (09 03 0C 12 28 53 45 4E 00 26)
RFXCOM Error undecoded packet received: 09 03 0C 12 28 53 45 4E 00 26
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 10 3 12 19 48 151 232 85 1 0 0 (0A 03 0C 13 30 97 E8 55 01 00 00)
RFXCOM Error undecoded packet received: 0A 03 0C 13 30 97 E8 55 01 00 00
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 7 112 0 20 0 7 145 128 (07 70 00 14 00 07 91 80)
RFXCOM Debug RFXSensor 0 with subtype 0 and value 1937
RFXCOM Debug Data1: 7 112 0 20 0 7 145 128
RFXCOM Debug RFXSensor 0 in list
RFXCOM Debug UpdateMinMax state temperature value 19.37
RFXCOM Debug check if new day: last date 2012/08/29, new date 2012/08/29
RFXCOM Debug Setting display value to TempHumid
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 7 112 2 21 0 1 247 128 (07 70 02 15 00 01 F7 80)
RFXCOM Debug RFXSensor 0 with subtype 2 and value 503
RFXCOM Debug Data1: 7 112 2 21 0 1 247 128
RFXCOM Debug RFXSensor 0 in list
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 7 112 1 22 0 0 22 128 (07 70 01 16 00 00 16 80)
RFXCOM Debug RFXSensor 0 with subtype 1 and value 22
RFXCOM Debug Data1: 7 112 1 22 0 0 22 128
RFXCOM Debug RFXSensor 0 in list
RFXCOM Debug RFXSensor read values: value=22 temperature=19 (C)
RFXCOM Debug Setting display value to TempHumid
RFXCOM Debug ++++++++++++++