Indigo Domotics

Ive got a tv lift installed in a big cabinet which ahs a rf controller to let the lift go up and down.
I was wondering if i can intercept and use my vfxcom as controller so i can integrate the lift into indigo.

as far as i can see the tech sheet says its: "RF signal operated (Radio frequency – 433,92Hz)"
So i assume that vfxcom could control that.

if anyone has a clue on how to continue please let me know.
ps, I've installed the rfxcmanager but i don't seem to get how you could see rf signals

Is there anyone who could help me out. I dont know how to intercept the rf signal.

Might be worth dropping rfxcom an email directly to see if the device is supported.

Ive got it working now.

I cut the wires of the wired controls, attached it to a fibaro 2x 1.5w module and now its zwave ready.
Happy to say it works like a charm

https://youtu.be/r5UmyQdZsBc

Video comes up as not available, but glad you got it working in the end

strange, ive had that a couple of times. Its seems to work for me.

Anyway, yes happy!