An example of the chart is:
I wanted the the x-axis ticks to appear beneath the line. So as an experiment, I added a 'direction': 'out' to the k_major_x dictionary. This seems to work but it would be nice to specify it as a config option. If the ticks are inside, they tend to get lost/overwritten by the data columns.
I would also like the minor ticks (every 15 minutes) to display.
The CSV data (sample) is like this:
- Code: Select all
Timestamp,Motion Detected
"2017-03-20 00:00:00.000000","0"
"2017-03-20 00:15:00.000000","0"
"2017-03-20 00:30:00.000000","0"
<SNIP>
"2017-03-20 08:30:00.000000","0"
"2017-03-20 08:45:00.000000","0"
"2017-03-20 09:00:00.000000","0.9"
"2017-03-20 09:15:00.000000","0.9"
"2017-03-20 09:30:00.000000","0"
"2017-03-20 09:45:00.000000","0.9"
"2017-03-20 10:00:00.000000","0"
"2017-03-20 10:15:00.000000","0"
"2017-03-20 10:30:00.000000","0.9"
"2017-03-20 10:45:00.000000","0.9"
"2017-03-20 11:00:00.000000","0"
"2017-03-20 11:15:00.000000","0"
"2017-03-20 11:30:00.000000","0"
<SNIP>
"2017-03-20 22:00:00.000000","0"
"2017-03-20 22:15:00.000000","0"
"2017-03-20 22:30:00.000000","0"
"2017-03-20 22:45:00.000000","0"
"2017-03-20 23:00:00.000000","0"
"2017-03-20 23:15:00.000000","0"
"2017-03-20 23:30:00.000000","0"
"2017-03-20 23:45:00.000000","0"
Ideally the chart would start at 00:00 and end at 24:00 with major ticks every 4 hours and minor ticks every 15 minutes. At the moment the chart area seems to start at 23:00 and end at 01:00. Is this possible to modify?
This plugin is a great way to get an instant visualisation of when motion is detected.