Basic zwave function including setting user codes and remote control works fine. I am however seeing some transposed and non-recognsed states.
The model is LS-8015-MM-Z-Wave
Zwave certification: ZC08-131000011
The process of unlocking and having auto relock a door via Indigo yields the following:
- Code: Select all
Z-Wave sent "mudroom front door" unlock
Z-Wave Lock/Code Manager Debug Node ID 54 (Hex 54) found in lockIDs
Z-Wave Lock/Code Manager Debug Node ID 54 (Hex 54) found in lockIDs
Z-Wave Lock/Code Manager Debug Door: 01 0D 00 04 00 36 07 62 03 01 00 02 FE FE FF
Z-Wave Lock/Code Manager Debug
Z-Wave Lock/Code Manager Debug Node: 54
Z-Wave Lock/Code Manager Debug Type: 1
Z-Wave Lock/Code Manager Debug User: 0
Z-Wave Lock/Code Manager Status: Door is unlocked: auto relock active [Node: 54]
Z-Wave Lock/Code Manager Debug Updating state: lockState
Z-Wave Lock/Code Manager Latch open, Bolt unlocked, Door open [Node: 54]
Z-Wave Lock/Code Manager Debug Updating state: handleState
Z-Wave Lock/Code Manager Debug Node ID 54 (Hex 54) found in lockIDs
Z-Wave Lock/Code Manager Debug Node ID 54 (Hex 54) found in lockIDs
Z-Wave received "mudroom front door" status update unlocked (manually)
Z-Wave Lock/Code Manager Debug Node ID 54 (Hex 54) found in lockIDs
Z-Wave Lock/Code Manager Debug Raw: 01 0F 00 04 00 36 09 71 05 06 02 00 FF 06 02 00 FF
Z-Wave Lock/Code Manager Unknown lock status received: 6 [Node: 54]
Z-Wave Lock/Code Manager Debug -----
Z-Wave Lock/Code Manager Debug Node ID 54 (Hex 54) found in lockIDs
Z-Wave Lock/Code Manager Debug Node ID 54 (Hex 54) found in lockIDs
Z-Wave received "mudroom front door" status update is locked
Z-Wave Lock/Code Manager Debug Node ID 54 (Hex 54) found in lockIDs
Z-Wave Lock/Code Manager Debug Door: 01 0D 00 04 00 36 07 62 03 FF 00 00 FE FE FF
Z-Wave Lock/Code Manager Debug
Z-Wave Lock/Code Manager Debug Node: 54
Z-Wave Lock/Code Manager Debug Type: 255
Z-Wave Lock/Code Manager Debug User: 0
Z-Wave Lock/Code Manager Status: Door is locked [Node: 54]
Z-Wave Lock/Code Manager Debug Updating state: lockState
Z-Wave Lock/Code Manager Latch open, Bolt locked, Door open [Node: 54]
Z-Wave Lock/Code Manager Debug Updating state: handleState
Z-Wave Lock/Code Manager Debug Node ID 54 (Hex 54) found in lockIDs
Z-Wave Lock/Code Manager Debug Node ID 54 (Hex 54) found in lockIDs
Z-Wave received "mudroom front door" status update locked (via timer)
Z-Wave Lock/Code Manager Debug Node ID 54 (Hex 54) found in lockIDs
Z-Wave Lock/Code Manager Debug Raw: 01 0F 00 04 00 36 09 71 05 06 09 00 FF 06 09 00 FF
Z-Wave Lock/Code Manager Unknown lock status received: 6 [Node: 54]
Z-Wave Lock/Code Manager Debug -----
Z-Wave Lock/Code Manager Debug Node ID 54 (Hex 54) found in lockIDs
I see it reports the the unlock as being manual rather than by RF. That doesn't really matter as i can transpose them. But i'm intrigued what the Unknown Lock Status would be...that seems to be the state reported whenever the door is remotely locked in a closed position. It is correctly reporting being the basic locked/unlocked status though, which is 99% of what is needed.
[I'm still working to confirm how it is responding to vacation/privacy modes - what is actually the intended difference between these?]