- Posted on
Fri Dec 16, 2016 3:15 pm
-
jalves
offline
-
- Posts: 745
- Joined: Jun 16, 2013
Not sure if this is the correct place to post this question. It may or may not relate to the lock manager plugin. Anyway, I just installed a Kwikset 912 lock and have attempted to set a pin using the lock manager plugin. When I do so, the Stick gets knocked off line, but seems to recover OK. Here's the log entries:
- Code: Select all
Dec 16, 2016, 4:15:06 PM
Action Group Set Lock Pin
Z-Wave Lock Manager Setting PIN for user 3 to: 1234
Z-Wave sent "020 - Entry Lock" raw command [63 01 03 01 31 32 33 34]
Z-Wave Error Error in plugin execution:
Traceback (most recent call last):
File "/Library/Application Support/Perceptive Automation/Indigo 7/IndigoPluginHost.app/Contents/PlugIns/serialinterface.py", line 501, in startCommThread
self.processCommThread()
File "/Library/Application Support/Perceptive Automation/Indigo 7/IndigoPluginHost.app/Contents/PlugIns/serialinterface.py", line 675, in processCommThread
self.processQueueInPacket(packet) # Subclass is required to define.
File "zwaveinterface.py", line 2223, in processQueueInPacket
File "zwaveinterface.py", line 2197, in _processFuncCall
File "zwaveinterface.py", line 2258, in _processCommandReply
File "zwaveinterface.py", line 2242, in _processFuncTriggersAndBroadcast
File "zwaveinterface.py", line 2195, in _processFuncCall
File "zwavecmd_security.py", line 241, in _processEncryptedPacket
File "zwaveinterface.py", line 2258, in _processCommandReply
File "zwaveinterface.py", line 2242, in _processFuncTriggersAndBroadcast
File "zwaveinterface.py", line 2195, in _processFuncCall
File "actionsensor.py", line 551, in _processAlarmSensorStatusReply
File "actionsensor.py", line 108, in _processSensorOnOffVal
File "actionlock.py", line 146, in _processLockSensorAlarmByte
TypeError: unsupported operand type(s) for &: 'NoneType' and 'int'
Z-Wave Error exc type is <type 'exceptions.TypeError'>
Z-Wave Error restarting serial connection in 5.0 seconds
Interface Failure lost connection with interface
Z-Wave connected to Z-Stick S2 interface on /dev/cu.SLAB_USBtoUART (firmware 3.07)
Last edited by
jalves on Sun Dec 18, 2016 12:57 pm, edited 1 time in total.
Running Indigo 2023.2 on a 24" iMac M1), OS X 14.4
Jeff