Variable Images for Nest on control pages

Posted on
Mon Jan 11, 2016 6:42 am
bosstdh offline
Posts: 12
Joined: Jan 10, 2016

Variable Images for Nest on control pages

I am looking to have an image represent the current temperature and heat set point. As the current temperature changes and the set point the image should change - Is this possible?
Please let me know how to name the files if so.

heat set point = 18 degrees celcius
Current temperature = 16 degrees celcius

how would i name the file so that the image would appear on the Control Page? nest+heatsetpoint18.png?

Posted on
Tue Jan 12, 2016 1:11 am
marketability offline
User avatar
Posts: 198
Joined: Dec 08, 2015
Location: UK

Re: Variable Images for Nest on control pages

you would name the images something like...
assuming the value is an integer

nest_heatsetpoint+.png
nest_heatsetpoint+0.png
nest_heatsetpoint+1.png

... etc

copy the image files to the "/Library/Application Support/Perceptive Automation/Indigo 6/IndigoWebServer/images/controls/devices" folder if the value is a device state

or "/Library/Application Support/Perceptive Automation/Indigo 6/IndigoWebServer/images/controls/variables" if the value is stored in a variable

Posted on
Thu Jan 14, 2016 9:58 pm
bosstdh offline
Posts: 12
Joined: Jan 10, 2016

Re: Variable Images for Nest on control pages

thank you for your reply yes i tested that and it worked.
How would i display an image for the current temperature?

Could i display an image with a combination of the heat point and the current temperature at the same time?
how would i display that on the control page as i can select only one variable at a time?

Page 1 of 1

Who is online

Users browsing this forum: No registered users and 1 guest