Hello,
I am looking at a Z-Wave GoControl bulb that allows configuration parameters to be set.
Parameter 1: Dim Level Memory
By default, the LB60Z-1 bulb will go to full brightness when turned on. To have the bulb turn on to the last dim level setting, set Parameter 1 to 1.
Parameter 9: Dim / Bright Step Level
When the brightness is adjusted by the controller/gateway, how much the bulb brightness will change is set by the programmed dimming step level.
Parameter 10: Dim / Bright Speed
When the brightness is adjusted by the controller/gateway, how fast the bulb brightness will change is set by the programmed dimming step speed.
Example: If Parameter 9 is set to the default value of 1, setting Parameter 10 from 1 to 10 will equal the number of seconds it takes to dim down the bulb when the bulb is turned off, i.e. 1 equals 1 second for the bulb to dim down and turn off, 10 equals 10 seconds for the bulb to dim down and turn OFF.
How does one set parameters?
I would image in Devices double click a device, press the Edit Device Settings button, but none of my current devices seem to have anything configurable.
Is it possible?
Thanks,
Barry.