Indigo Domotics

Hi,

I get errors and no data seems to be loaded from Weather Underground.
Below I have gathered the Log produced in Indigo. I have also attached the settings I have.
I am using the free plan from Weather Underground. I have updated and are running Indigo 7.0.2.
Any comment of what I am doing incorrect would be appreciated.

When I try to refresh the data I get the following errors in the Indigo Log window:

Code: Select all

 WUnderground Error              Unable to reach Weather Underground. URLError - <urlopen error no host given> (Line 817)
 WUnderground Error              Sleeping until next scheduled poll.


Using the debug output from Underground I see that the following URL is used:

Code: Select all

http://api.wunderground.com/api/XXXXXXXXXX
813671da849e7e02/geolookup/alerts_v11/almanac_v11/astronomy_v11/conditions_v11/forecast_v11/forecast10day_v11/hourly_v11/lang:EN/history_v11_20161126/tide_v11/q/SFO.json

(I have replaced my private key with XXXX'es.)

Using the URL in a normal browser gives:

Code: Select all

{
  "response": {
  "version":"0.1",
  "termsofService":"http://www.wunderground.com/weather/api/d/terms.html",
  "features": {
  }
      ,
   "error": {
      "type": "keynotfound"
      ,"description": "this key does not exist"
   }
   }
}


I am quite certain that I am using the correct key. ( I even re-generated the key and switched in the settings panel). This has also worked in the past.


Best regards
Anders

Hi,

Playing around a bit in a web browser it seems that there is a "/" missing in the URL.

Using:

Code: Select all

http://api.wunderground.com/api/XXXXXXXXXX813671da849e7e02/geolookup/alerts_v11/almanac_v11/astronomy_v11/conditions_v11/forecast_v11/forecast10day_v11/hourly_v11/lang:EN/history_v11_20161126/tide_v11/q/SFO.json

Will give the strange output as seen in my previous post. (My key replaced with XXX'es)


If I a "/" is inserted in the URL:

Code: Select all

http://api.wunderground.com/api/XXXX/813671da849e7e02/geolookup/alerts_v11/almanac_v11/astronomy_v11/conditions_v11/forecast_v11/forecast10day_v11/hourly_v11/lang:EN/history_v11_20161126/tide_v11/q/SFO.json

I get a more complete result:

Code: Select all

{
  "response": {
  "version":"0.1",
  "termsofService":"http://www.wunderground.com/weather/api/d/terms.html",
  "features": {
  "geolookup": 1
  ,
  "alerts": 1
  ,
  "almanac": 1
  ,
  "astronomy": 1
  ,
  "conditions": 1
  ,
  "forecast": 1
  ,
  "forecast10day": 1
  ,
  "hourly": 1
  ,
  "history": 1
  ,
  "tide": 1
  }
      ,
   "error": {
      "type": "unknownfeature"
   }
   }
      ,   "location": {
      "type":"CITY",
      "country":"US",
      "country_iso3166":"US",
      "country_name":"USA",
      "state":"CA",
      "city":"San Francisco International",
      "tz_short":"PST",
      "tz_long":"America/Los_Angeles",
      "lat":"37.61888885",
      "lon":"-122.37472534",
      "zip":"94128",

(I have only posted first few lines of output).
Thus it would seem that something is not correct with the URL.

I tried to add a "/" in the setting, but this did not help.


Best regards
Anders

Hi Anders - I'm not sure what's going on with your key. When I copy your original URL and insert my key in its place, the data downloads just fine (the original URL you posted is broken over two lines, which I corrected.)

This URL works for me:

Code: Select all

http://api.wunderground.com/api/XXXXXXXXXXX/geolookup/alerts_v11/almanac_v11/astronomy_v11/conditions_v11/forecast_v11/forecast10day_v11/hourly_v11/lang:EN/history_v11_20161126/tide_v11/q/SFO.json

I also tested the URL generated by the plugin and that works too.