Heiman HS1MS-Z Smart Motion Sensor

Forum rules

Questions about hardware that can be controlled by Indigo (but not through the interfaces and plugins listed). If Indigo doesn't support some bit of hardware you're interested in, and you don't find a 3rd Party Plugin for it, add it to this forum. Be sure to include links to as much information as you can find about it.

Note: adding it here does not mean we're going to add it - in fact it's possible one of our 3rd party developers may decide to write a plugin for it. We add hardware/features based on a lot of different factors beyond just having a request for it.

Posted on
Sun Sep 10, 2017 6:21 am
bento offline
Posts: 15
Joined: Dec 31, 2014
Location: Paris - France

Heiman HS1MS-Z Smart Motion Sensor

Hello,

I have just received two Heiman HS1MS-Z Smart Motion Sensor modules bought through AliExpress.
Here is the manufacturer link : http://www.heimantech.com/product/101.html
ZWave Alliance description : https://products.z-wavealliance.org/products/1801
And the AliExpress link : https://www.aliexpress.com/item/Wireles ... 0.0.VEhPtE

This device is quite thin and easy to install, shipped with a CR123A battery (half loaded) and Zwave Plus powered

I have tried to get it into my Indigo system but it seems that integration with Indigo needs to be somehow adjusted.
Here are the logs regarding the inclusion/installation and properties :
Z-Wave started controller inclusion mode
Z-Wave controller included module: 027 - Notification Sensor
Z-Wave stopped controller inclusion mode
Z-Wave Syncing - started for "027 - Notification Sensor"
Z-Wave Syncing - retrieved module neighbors list: 11, 16, 21, 23
Z-Wave Syncing - assigning return route to "027 - Notification Sensor"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Unknown - 0260, Notification Sensor - 80011000
Z-Wave Syncing - retrieved protocol version 4.05, app version 1.02
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Notification Sensor : Notification Sensor (04 : 07 : 01, base 00)
Z-Wave Syncing - retrieved command classes: 20v1 80v1 84v2 85v1 86v1 30v1 71v1 72v1 73v1 59v1 5Av1 5Ev1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, battery, beaming, waking
Z-Wave Syncing - retrieved wake interval of 120 minutes
Z-Wave Syncing - device "027 - Notification Sensor" wake interval changed to 60 minutes
Z-Wave Syncing - retrieved group 1 associations: []
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - retrieved group 3 associations: []
Z-Wave Syncing - retrieved group 4 associations: []
Z-Wave Syncing - added group 1 association to interface
Z-Wave Syncing - retrieved battery level of 52%
Z-Wave Syncing - created device "027 - Notification Sensor"
SQL Logger creating table device_history_54252643 for "027 - Notification Sensor"
SQL Logger adding column "batterylevel" to table device_history_54252643 ("027 - Notification Sensor")
Z-Wave Syncing - complete
SQL Logger adding column "batterylevel_ui" to table device_history_54252643 ("027 - Notification Sensor")
Z-Wave sent "027 - Notification Sensor" status request
Z-Wave received "027 - Notification Sensor" status update battery level 52%

Indigo Z-Wave Version: 2.0.88
Node ID: 27
Model: Notification Sensor
Model ID: 80011000
Manufacturer: Unknown
Manufacturer ID: 0260
Protocol Version: 4.05
Application Version: 1.02
Model Definition Version: 0
Library Type: 6
Class Name: Notification Sensor
Class Hierarchy: 04 : 07 : 01
Command Class Base: 00
Command Versions: 20v1 80v1 84v2 85v1 86v1 30v1 71v1 72v1 73v1 59v1 5Av1 5Ev1
Encryption Status: Not Supported
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: routing, battery, beaming, waking
Neighbors: 11, 16, 21, 23
Associations: 1:[1] 2:[] 3:[] 4:[]
Config Values: - none -


It seems a good piece of hardware, I hope that it can work with Indigo.

Thanks,
Christophe

Image

Posted on
Sun Sep 10, 2017 11:52 am
matt (support) offline
Site Admin
User avatar
Posts: 21411
Joined: Jan 27, 2003
Location: Texas

Re: Heiman HS1MS-Z Smart Motion Sensor

Hi Christophe ,

Is the device in Indigo not showing up as an on/off sensor type of device (gray/green dot icon in the main window)?

Even without an Indigo device definition you can probably still create a Trigger to detect the raw packet being sent. If you enable the debug logging checkbox in Indigo (via the Interfaces->Z-Wave->Configure... menu item) then trip the motion sensor a couple of times I can give you instructions on how to create the trigger.

We'll also add to our list to create a proper device definition for it.

Image

Posted on
Sun Sep 10, 2017 12:32 pm
bento offline
Posts: 15
Joined: Dec 31, 2014
Location: Paris - France

Re: Heiman HS1MS-Z Smart Motion Sensor

Many thanks for your prompt feedback, here you will find the detailed log :

Z-Wave Debug RCVD requestBinarySensorStatus: 01 0A 00 04 00 1B 04 30 03 FF 08 2A
Z-Wave Debug . . requestBinarySensorStatus: node 027, endpoint None, type 8, value 255
Z-Wave Debug RCVD requestAlarmSensorStatus: 01 10 00 04 00 1B 0A 71 05 00 00 00 FF 07 03 00 00 75
Z-Wave Debug . . requestAlarmSensorStatus: node 027, endpoint None, cmdClass 71, type 0, value 0, classSubKey 710000
Z-Wave Debug . . requestAlarmSensorStatus: typeExt 7, valueExt 3, classSubKeyExt 7100000703
Z-Wave Debug RCVD nodeAwake: 01 08 00 04 00 1B 02 84 07 69
Z-Wave Debug . . nodeAwake: node 027
Z-Wave Debug . . . . . . . : skipping battery check (next check in 713 mins)
Z-Wave Debug SENT goToSleep: 01 09 00 13 1B 02 84 08 24 16 42
Z-Wave Debug RCVD packet: 01 07 00 13 16 00 00 02 FF (hex)
Z-Wave Debug RCVD requestBinarySensorStatus: 01 0A 00 04 00 1B 04 30 03 FF 08 2A
Z-Wave Debug . . requestBinarySensorStatus: node 027, endpoint None, type 8, value 255
Z-Wave Debug RCVD requestAlarmSensorStatus: 01 10 00 04 00 1B 0A 71 05 00 00 00 FF 07 03 00 00 75
Z-Wave Debug . . requestAlarmSensorStatus: node 027, endpoint None, cmdClass 71, type 0, value 0, classSubKey 710000
Z-Wave Debug . . requestAlarmSensorStatus: typeExt 7, valueExt 3, classSubKeyExt 7100000703
Z-Wave Debug RCVD nodeAwake: 01 08 00 04 00 1B 02 84 07 69
Z-Wave Debug . . nodeAwake: node 027
Z-Wave Debug . . . . . . . : skipping battery check (next check in 713 mins)
Z-Wave Debug SENT goToSleep: 01 09 00 13 1B 02 84 08 24 17 43
Z-Wave Debug RCVD packet: 01 07 00 13 17 00 00 01 FD (hex)

Z-Wave Debug RCVD requestBinarySensorStatus: 01 0A 00 04 00 1B 04 30 03 FF 0C 2E
Z-Wave Debug . . requestBinarySensorStatus: node 027, endpoint None, type 12, value 255
Z-Wave Debug RCVD requestAlarmSensorStatus: 01 10 00 04 00 1B 0A 71 05 00 00 00 FF 07 08 00 00 7E
Z-Wave Debug . . requestAlarmSensorStatus: node 027, endpoint None, cmdClass 71, type 0, value 0, classSubKey 710000
Z-Wave Debug . . requestAlarmSensorStatus: typeExt 7, valueExt 8, classSubKeyExt 7100000708
Z-Wave Debug RCVD nodeAwake: 01 08 00 04 00 1B 02 84 07 69
Z-Wave Debug . . nodeAwake: node 027
Z-Wave Debug . . . . . . . : skipping battery check (next check in 707 mins)
Z-Wave Debug SENT goToSleep: 01 09 00 13 1B 02 84 08 24 1E 4A
Z-Wave Debug RCVD packet: 01 07 00 13 1E 00 00 01 F4 (hex)


And yes it is seen as on/off sensor from Indigo, but on/off states are not updated

Posted on
Tue Oct 17, 2017 8:12 pm
matt (support) offline
Site Admin
User avatar
Posts: 21411
Joined: Jan 27, 2003
Location: Texas

Re: Heiman HS1MS-Z Smart Motion Sensor

The messages being sent aren't quite what I am expecting to see. Does this module have a tamper switch for when the battery or back cover is removed? If so, was the cover off when you performed the test above? If that is the case, then can you repeat the process but with the cover in place?

Image

Posted on
Thu Nov 09, 2017 7:33 pm
matt (support) offline
Site Admin
User avatar
Posts: 21411
Joined: Jan 27, 2003
Location: Texas

Re: Heiman HS1MS-Z Smart Motion Sensor

Indigo 7.1.1 is now available for download and includes support for the Heiman Motion Sensor (HS1MS-Z).

Image

Posted on
Fri Nov 10, 2017 2:25 am
bento offline
Posts: 15
Joined: Dec 31, 2014
Location: Paris - France

Re: Heiman HS1MS-Z Smart Motion Sensor

Great, thanks a lot!
Just installed last version of Indigo.
I will now try to get the device synced!

Page 1 of 1

Who is online

Users browsing this forum: No registered users and 5 guests