Warning plugin "RFXCOM 1.4.0" may not be compatible with next Indigo release without an update
RFXCOM Error 'key isUS not found in dict'
2023-07-30 12:38:05.727 DEBUG Plugin.debugLog: b'\t\x19\x06\x1a\xe3{}\xc1\x00\x80' (processing)
2023-07-30 12:38:05.729 DEBUG Plugin.debugLog: processPacket: Data: b'\t\x19\x06\x1a\xe3{}\xc1\x00\x80' and type <class 'bytes'>
2023-07-30 12:38:05.729 DEBUG Plugin.debugLog: Blinds Remote with id1-3 2282425 and unitcode 193 command 0 received
2023-07-30 12:38:05.729 DEBUG Plugin.debugLog: Blinds Remote with subtype 6 and sensor 228242693 received
2023-07-30 12:38:05.729 DEBUG Plugin.debugLog: Enter the below into Device Details: HouseCode (hex):E37B7D, Subtype (int):6& UnitCode (int):193
2023-07-30 12:38:05.729 DEBUG Plugin.debugLog: b'\t\x19\x06\x1a\xe3{}\xc1\x00\x80' SensorId2: 6, and sensorid type: <class 'bytes'>
2023-07-30 12:38:05.730 ERROR Plugin.errorLog: Unknown device detected (type = 25). Select a BlindsT1234 Device from the list of devices
2023-07-30 12:38:05.730 ERROR Plugin.errorLog: HouseCode (hex)=E37B7D ,subtype (int)=6 ,unitCode (int)=193
adres1 = int(dev.pluginProps['address'][0:2], 16)
adres2 = int(dev.pluginProps['address'][2:4], 16)
adres3 = int(dev.pluginProps['address'][4:6], 16)
int((adres1 * 1000000) + (adres2 * 10000) + (adres3 * 100) + housecode)
2023-07-30 12:38:05.729 DEBUG Plugin.debugLog: Blinds Remote with subtype 6 and sensor [b]228242693 [/b]received
racarter wrote:
Yes - I’ve unchecked it.
.
cdt:/Users/cdt/Downloads/rfxcmd-v03-alpha1>./rfxcmd.py -d /dev/tty.usbserial-A1YJB0KQ -a LISTEN
RFXCMD Version 0.3 (515)
------------------------------------------------
Received = 0D 01 00 00 02 53 EB 00 00 20 01 02 00 00
Date/Time = 2022-02-13 18:11:26
Packet Length = 0D
Packettype = Interface Message
Subtype = Interface response
Sequence nbr = 00
Response on cmnd = Get Status, return firmware versions and configuration of the interface.
Transceiver type = 433.92MHz (Transceiver)
Firmware version = 235
Display undecoded = Off
Protocols:
Disabled AE (433.92)
Disabled Rubicson (433.92)
Disabled FineOffset / Viking (433.92)
Disabled RFU3
Disabled RFU4
Disabled RFU5
Disabled RFU6
Disabled Mertik (433.92)
Disabled AD (433.92)
Disabled Hideki/UPM (433.92)
Disabled La Crosse (433.92/868.30)
Disabled FS20 (868.35)
Disabled ProGuard (868.35 FSK)
Disabled BlindsT0 (433.92)
Disabled BlindsT1/T2/T3 (433.92)
Disabled X10 (310/433.92)
Disabled ARC (433.92)
Disabled AC (433.92)
Disabled HomeEasy EU (433.92)
Disabled Meiantech (433.92)
Enabled Oregon Scientific (433.92)
Disabled ATI (433.92)
Disabled Visonic (315/868.95)
------------------------------------------------
Received = 0D 54 02 00 84 00 00 C1 29 00 03 DD 04 50
Date/Time = 2022-02-13 18:11:38
Packet Length = 0D
Packettype = Temperature, humidity and barometric sensors
Subtype = BTHR918N, BTHR968
Seqnbr = 00
Id = 8400
Temperature = 19.3 C
Humidity = 41
Humidity Status = Dry
Barometric pressure = 989
Forecast Status = Rainy
Battery = 0
Signal level = 5
------------------------------------------------
Received = 11 5A 02 01 82 E2 00 00 00 0A 90 00 00 AF D5 B8 28 79
Date/Time = 2022-02-13 18:12:14
Packet Length = 11
Packettype = Energy usage sensors
Subtype = CM180
Seqnbr = 01
Id = 82E2
Instant usage = 2704 Watt
Total usage = 13189394 Wh
Battery = 9
Signal level = 7
------------------------------------------------
Received = 0D 54 02 02 84 00 00 C1 29 00 03 DD 04 50
Date/Time = 2022-02-13 18:12:16
Packet Length = 0D
Packettype = Temperature, humidity and barometric sensors
Subtype = BTHR918N, BTHR968
Seqnbr = 02
Id = 8400
Temperature = 19.3 C
Humidity = 41
Humidity Status = Dry
Barometric pressure = 989
Forecast Status = Rainy
Battery = 0
Signal level = 5
Stopped plugin "RFXCOM 2.1.16"
Starting plugin "RFXCOM 2.1.16" (pid 2535)
Started plugin "RFXCOM 2.1.16"
RFXCOM Debug RFXCOM startup called
RFXCOM Debug startup called
RFXCOM Debug <<-- entering deviceStartComm: Power Monitor House Mains (99275676 - ELEC2EnergyUsageSensor)
RFXCOM Debug <<-- entering deviceStartComm: Temperature Inside (257613241 - Barometer)
RFXCOM Debug <<-- entering deviceStartComm: Temperature Outside Back (1107983630 - Temperature)
RFXCOM Debug Updating plugin props, Sensor 507
RFXCOM Debug <<-- entering deviceStartComm: Temperature Outside Front (1427491408 - Temperature)
RFXCOM Debug Updating plugin props, Sensor 419
RFXCOM Debug runConcurrentThread called
RFXCOM Debug startComm called
RFXCOM Debug getConfiguration start
RFXCOM initializing communication on port /dev/cu.usbserial-A1YJB0KQ at speed 38400
RFXCOM Debug serial port opened
RFXCOM Debug send reset cmd: 13 0 0 0 0 0 0 0 0 0 0 0 0 0 (0D 00 00 00 00 00 00 00 00 00 00 00 00 00)
RFXCOM Debug PIC INIT IS: none
RFXCOM Debug send init cmd: 13 0 0 1 2 0 0 0 0 0 0 0 0 0 (0D 00 00 01 02 00 00 00 00 00 00 00 00 00)
RFXCOM Debug incomplete packet: 13 1 (0D 01)
RFXCOM Error incomplete packet received
RFXCOM Debug rcvd init reply: none
RFXCOM Error initialization failed (retrying in 10 seconds)
RFXCOM Error Error in plugin execution runConcurrentThread:
Traceback (most recent call last):
File "plugin.py", line 309, in runConcurrentThread
File "/Library/Application Support/Perceptive Automation/Indigo 2021.2/Plugins/RFXCOM.indigoPlugin/Contents/Server Plugin/RFXTRX.py", line 2285, in startComm
AttributeError: 'NoneType' object has no attribute 'close'
RFXCOM Error plugin runConcurrentThread function returned or failed (will attempt again in 10 seconds)
RFXCOM Debug runConcurrentThread called
RFXCOM Debug startComm called
RFXCOM Debug getConfiguration start
RFXCOM initializing communication on port /dev/cu.usbserial-A1YJB0KQ at speed 38400
RFXCOM Debug serial port opened
RFXCOM Debug send reset cmd: 13 0 0 0 0 0 0 0 0 0 0 0 0 0 (0D 00 00 00 00 00 00 00 00 00 00 00 00 00)
RFXCOM Debug PIC INIT IS: none
RFXCOM Debug send init cmd: 13 0 0 1 2 0 0 0 0 0 0 0 0 0 (0D 00 00 01 02 00 00 00 00 00 00 00 00 00)
RFXCOM Error communication error occured
RFXCOM Debug Traceback (most recent call last):
File "/Library/Application Support/Perceptive Automation/Indigo 2021.2/Plugins/RFXCOM.indigoPlugin/Contents/Server Plugin/RFXTRX.py", line 703, in readPacket
data = self.port.read()
File "/Library/Application Support/Perceptive Automation/Indigo 2021.2/IndigoPluginHost.app/Contents/Resources/PlugIns/serial/serialposix.py", line 474, in read
'device reports readiness to read but returned no data '
SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?)
RFXCOM Debug rcvd init reply: none
RFXCOM Error initialization failed (retrying in 10 seconds)
RFXCOM Error Error in plugin execution runConcurrentThread:
Traceback (most recent call last):
File "plugin.py", line 309, in runConcurrentThread
File "/Library/Application Support/Perceptive Automation/Indigo 2021.2/Plugins/RFXCOM.indigoPlugin/Contents/Server Plugin/RFXTRX.py", line 2285, in startComm
AttributeError: 'NoneType' object has no attribute 'close'
RFXCOM Error plugin runConcurrentThread function returned or failed (will attempt again in 10 seconds)
RFXCOM Debug runConcurrentThread called
RFXCOM Debug startComm called
RFXCOM Debug getConfiguration start
RFXCOM Error "RFXCOM serial port" serial port open error: [Errno 35] could not open port /dev/cu.usbserial-A1YJB0KQ: [Errno 35] Resource temporarily unavailable: '/dev/cu.usbserial-A1YJB0KQ'
RFXCOM Error the specified serial port is used by another interface or device
RFXCOM Error serial port could not be opened
RFXCOM connected to RFXtrx 433.92 MHz, firmware version 235
RFXCOM currently enabled receiver protocols: Oregon Scientific
Connected to W800 interface on port usbserial-A1YJB0KQ
RFXCOM Error incomplete packet received
RFXCOM initializing communication on port /dev/cu.usbserial-A1YJB0KQ at speed 38400
RFXCOM Error communication error occured
RFXCOM Error initialization failed (retrying in 10 seconds)
RFXCOM Error Error in plugin execution runConcurrentThread:
Traceback (most recent call last):
File "plugin.py", line 309, in runConcurrentThread
File "/Library/Application Support/Perceptive Automation/Indigo 2021.2/Plugins/RFXCOM.indigoPlugin/Contents/Server Plugin/RFXTRX.py", line 2285, in startComm
AttributeError: 'NoneType' object has no attribute 'close'
RFXCOM Error plugin runConcurrentThread function returned or failed (will attempt again in 10 seconds)
RFXCOM Error "RFXCOM serial port" serial port open error: [Errno 35] could not open port /dev/cu.usbserial-A1YJB0KQ: [Errno 35] Resource temporarily unavailable: '/dev/cu.usbserial-A1YJB0KQ'
RFXCOM Error the specified serial port is used by another interface or device
RFXCOM Error serial port could not be opened
cdt:/Users/cdt>systemextensionsctl list
4 extension(s)
--- com.apple.system_extension.driver_extension
enabled active teamID bundleID (version) name [state]
* * N3S6676K3E com.dymo.dymo-connect.usb (1.0/1) com.dymo.dymo-connect.usb [activated enabled]
* * 52444FG85C com.silabs.cp210x (6.0.2/1) com.silabs.cp210x [activated enabled]
* * G43BCU2T37 org.pqrs.Karabiner-DriverKit-VirtualHIDDevice (1.6.0/1.6.0) org.pqrs.Karabiner-DriverKit-VirtualHIDDevice [activated enabled]
* * 658CPPCMJJ com.ftdi.vcp.dext (1.0/089) NullDriver [activated enabled]
cdt:/Users/cdt>ll /System/Library/Extensions/AppleUSBFTDI*
ls: /System/Library/Extensions/AppleUSBFTDI*: No such file or directory
#include <ArduinoJson.h>
/*
Based on the SendDemo example from the RC Switch library
https://github.com/sui77/rc-switch/
*/
#include <RCSwitch.h>
#include <ESP8266WiFi.h>
#include <PubSubClient.h>
#define wifi_ssid "MyWiFiSSID"
#define wifi_password "MyWiFiPassword"
#define MQTTServer "MyMQTTServerIPAddress"
RCSwitch mySwitch = RCSwitch();
WiFiClient espClient;
PubSubClient MQTTclient(espClient);
void setup() {
Serial.begin(9600);
setup_wifi();
MQTTclient.setServer(MQTTServer, 1883);
MQTTclient.setCallback(callback);
/*
* RF 433 set up
*/
mySwitch.enableTransmit(14); // Transmitter is connected to Arduino Pin #10 on Uno, #14 on Feather Huzzah
mySwitch.setPulseLength(392); // Optional set pulse length. 392 for LED lights, 352 for extractor
mySwitch.setProtocol(1); //Set protocol (default is 1, will work for most outlets); 1 for water feature lights,11 for extractor fan
mySwitch.setRepeatTransmit(5); // Optional set number of transmission repetitions.
}
void setup_wifi() {
delay(10);
// We start by connecting to a WiFi network
Serial.println();
Serial.print("Connecting to ");
Serial.println(wifi_ssid);
WiFi.begin(wifi_ssid, wifi_password);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected");
Serial.println("IP address: ");
Serial.println(WiFi.localIP());
}
void callback(char* topic, byte* payload, unsigned int length) {
Serial.print("Message arrived on topic: ");
Serial.print(topic);
Serial.print(". Message: ");
String messageTemp;
for (int i=0;i<length;i++) {
Serial.print((char)payload[i]);
messageTemp += (char)payload[i];
}
Serial.println();
//Allocate the JSON document
StaticJsonDocument<192> doc;
// Deserialize the JSON received document
DeserializationError error = deserializeJson(doc, messageTemp);
// Test if parsing succeeds.
if (error) {
Serial.print(F("deserializeJson() failed: "));
Serial.println(error.f_str());
return;
}
// Fetch values.
//
// Most of the time, you can rely on the implicit casts.
// In other case, you can do doc["time"].as<long>();
const char* ControlMessage = doc["ControlMessage"];
long Protocol = doc["Protocol"];
long PulseLength = doc["PulseLength"];
long RepeatTransmit = doc["RepeatTransmit"];
// Print values.
Serial.println(ControlMessage);
Serial.println(Protocol);
Serial.println(PulseLength);
Serial.println(RepeatTransmit);
mySwitch.setPulseLength(PulseLength);
mySwitch.setProtocol(Protocol);
mySwitch.setRepeatTransmit(RepeatTransmit);
mySwitch.send(ControlMessage);
}
void reconnect() {
// Loop until we're reconnected
while (!MQTTclient.connected()) {
Serial.print("Attempting MQTT connection...");
// Attempt to connect
if (MQTTclient.connect("RFTxRx")) { //* See //NOTE below
Serial.println("connected");
MQTTclient.subscribe("rftxrx");
} else {
Serial.print("failed, rc=");
Serial.print(MQTTclient.state());
Serial.println(" try again in 5 seconds");
// Wait 5 seconds before retrying
delay(5000);
}
}
}
//NOTE: if a user/password is used for MQTT connection use:
//if(client.connect("TestMQTT", mqtt_user, mqtt_password)) {
void pubMQTT(String topic,float topic_val){
Serial.print("Newest topic " + topic + " value:");
Serial.println(String(topic_val).c_str());
MQTTclient.publish(topic.c_str(), String(topic_val).c_str(), true);
}
void loop() {
if (!MQTTclient.connected()) {
reconnect();
delay(1000);
}
MQTTclient.loop();
}
Started plugin "RFXCOM 2.1.16"
RFXCOM initializing communication on port /dev/cu.usbserial-A12HRLXR at speed 38400
RFXCOM connected to RFXtrx 433.92 MHz, firmware version 24
RFXCOM currently enabled receiver protocols: RFU, Byron, RSL, Lightning4, Viking, Rubicson, AE Blyss, Blinds T1234, Blinds T0, La Crosse, Hideki, LightwaveRF, Mertik, ATI, Oregon Scientific, HomeEasy EU, AC, ARC, X10
RFXCOM enabling receiver protocols: Undecoded
RFXCOM stored changed settings into non-volatile memory
Reloading plugin "RFXCOM 2.1.16"
Stopping plugin "RFXCOM 2.1.16" (pid 9338)
Stopped plugin "RFXCOM 2.1.16"
Starting plugin "RFXCOM 2.1.16" (pid 9348)
Started plugin "RFXCOM 2.1.16"
RFXCOM Debug RFXCOM startup called
RFXCOM Debug startup called
RFXCOM Debug runConcurrentThread called
RFXCOM Debug startComm called
RFXCOM Debug getConfiguration start
RFXCOM initializing communication on port /dev/cu.usbserial-A5001RgJ at speed 38400
RFXCOM Debug serial port opened
RFXCOM Debug send reset cmd: 13 0 0 0 0 0 0 0 0 0 0 0 0 0 (0D 00 00 00 00 00 00 00 00 00 00 00 00 00)
RFXCOM Debug PIC INIT IS: none
RFXCOM Debug send init cmd: 13 0 0 1 2 0 0 0 0 0 0 0 0 0 (0D 00 00 01 02 00 00 00 00 00 00 00 00 00)
RFXCOM Debug rcvd init reply: none
RFXCOM Error initialization failed (retrying in 10 seconds)
Disabling plugin "RFXCOM 2.1.16"
Stopping plugin "RFXCOM 2.1.16" (pid 9348)
RFXCOM Debug stopConcurrentThread called
RFXCOM Debug stopConcurrentThread called
RFXCOM Debug startComm Exit
RFXCOM Debug stopConcurrentThread called
RFXCOM Debug stopConcurrentThread called
RFXCOM Debug shutdown called
Have added a blindState device state - open, closed, partial.
I am thrilled that the plugin works well supporting both receiving and sending [for the first time] messages to the A-OK blind controllers. UI15 hopefully upgrading soon.
There is one problem: I have three blinds and use 4 channels (1,2,3 for each respective blind; and 4 to control all simultaneously).
the plugin appears to recognise any channel interchangeably (only one device is created, but the state changes regardless of which channel is selected on the multi channel remote). However commands sent only work on the blind registered to channel 1.
update: a second instance of the controller has appeared. both work but both control blind 1.
Is there a way to configure multiple devices operating on different channels? Or is this a limitation at the RFXTRX end?
Working Plugin Sent Commands
Unit code 3
(09 19 03 00 24 F5 05 **03** 01 00)
(09 19 03 00 24 F5 05 **03** 00 00)
Unit code 0
(09 19 03 00 24 F5 05 **00** 01 00)
(09 19 03 00 24 F5 05 **00** 00 00)
(09 19 03 00 24 F5 05 **00** 01 00)
Received Remote Commands - Stop Unit Code 0
(09 19 03 4A 24 F5 05 **01** 02 71)
(09 19 03 51 24 F5 05 **01** 02 71)
(09 19 03 52 24 F5 05 **01** 02 71)
Stop Unit Code 1
(09 19 03 58 24 F5 05 **01** 02 71)
(09 19 03 59 24 F5 05 **01** 02 71)
(09 19 03 5A 24 F5 05 **01** 02 71)
RFXCOM Debug Actions...TurnOn
RFXCOM Debug Turn BlindsT1234 Appliance/Dimmer On (level 0).
RFXCOM Debug Address 24F505
RFXCOM Debug housecode:3
RFXCOM Debug address1 and 2 and 3 = 36 , 245 , 5
RFXCOM Debug device type:BlindsT1234
RFXCOM Debug device subtype:6 / Command:On
RFXCOM Debug device level:0
RFXCOM Debug PackData:=: 25 3 0 36 245 5 3 1 0 (19 03 00 24 F5 05 03 01 00)
RFXCOM Debug send x10 cmd: 9 25 3 0 36 245 5 3 1 0 (09 19 03 00 24 F5 05 03 01 00)
RFXCOM Debug processing: 4 2 1 0 0 (04 02 01 00 00)
RFXCOM Debug ACK Message ACK, transmit OK
RFXCOM Debug ++++++++++++++
RFXCOM Debug sent "blinds kitchen" on
RFXCOM Debug Actions...TurnOff
RFXCOM Debug Turn BlindsT1234 Appliance/Dimmer Off (level 0).
RFXCOM Debug Address 24F505
RFXCOM Debug housecode:3
RFXCOM Debug address1 and 2 and 3 = 36 , 245 , 5
RFXCOM Debug device type:BlindsT1234
RFXCOM Debug device subtype:6 / Command:Off
RFXCOM Debug device level:0
RFXCOM Debug PackData:=: 25 3 0 36 245 5 3 0 0 (19 03 00 24 F5 05 03 00 00)
RFXCOM Debug send x10 cmd: 9 25 3 0 36 245 5 3 0 0 (09 19 03 00 24 F5 05 03 00 00)
RFXCOM Debug processing: 4 2 1 0 0 (04 02 01 00 00)
RFXCOM Debug ACK Message ACK, transmit OK
RFXCOM Debug ++++++++++++++
RFXCOM Debug sent "blinds kitchen" off
RFXCOM Debug Actions...TurnOn
RFXCOM Debug Turn BlindsT1234 Appliance/Dimmer On (level 0).
RFXCOM Debug Address 24F505
RFXCOM Debug housecode:0
RFXCOM Debug address1 and 2 and 3 = 36 , 245 , 5
RFXCOM Debug device type:BlindsT1234
RFXCOM Debug device subtype:6 / Command:On
RFXCOM Debug device level:0
RFXCOM Debug PackData:=: 25 3 0 36 245 5 0 1 0 (19 03 00 24 F5 05 00 01 00)
RFXCOM Debug send x10 cmd: 9 25 3 0 36 245 5 0 1 0 (09 19 03 00 24 F5 05 00 01 00)
RFXCOM Debug processing: 4 2 1 0 0 (04 02 01 00 00)
RFXCOM Debug ACK Message ACK, transmit OK
RFXCOM Debug ++++++++++++++
RFXCOM Debug sent "blinds wollemi" on
RFXCOM Debug Actions...TurnOff
RFXCOM Debug Turn BlindsT1234 Appliance/Dimmer Off (level 0).
RFXCOM Debug Address 24F505
RFXCOM Debug housecode:0
RFXCOM Debug address1 and 2 and 3 = 36 , 245 , 5
RFXCOM Debug device type:BlindsT1234
RFXCOM Debug device subtype:6 / Command:Off
RFXCOM Debug device level:0
RFXCOM Debug PackData:=: 25 3 0 36 245 5 0 0 0 (19 03 00 24 F5 05 00 00 00)
RFXCOM Debug send x10 cmd: 9 25 3 0 36 245 5 0 0 0 (09 19 03 00 24 F5 05 00 00 00)
RFXCOM Debug processing: 4 2 1 0 0 (04 02 01 00 00)
RFXCOM Debug ACK Message ACK, transmit OK
RFXCOM Debug ++++++++++++++
RFXCOM Debug sent "blinds wollemi" off
RFXCOM Debug Actions...TurnOn
RFXCOM Debug Turn BlindsT1234 Appliance/Dimmer On (level 0).
RFXCOM Debug Address 24F505
RFXCOM Debug housecode:0
RFXCOM Debug address1 and 2 and 3 = 36 , 245 , 5
RFXCOM Debug device type:BlindsT1234
RFXCOM Debug device subtype:6 / Command:On
RFXCOM Debug device level:0
RFXCOM Debug PackData:=: 25 3 0 36 245 5 0 1 0 (19 03 00 24 F5 05 00 01 00)
RFXCOM Debug send x10 cmd: 9 25 3 0 36 245 5 0 1 0 (09 19 03 00 24 F5 05 00 01 00)
DSC Alarm Alarm Zone 'alarm zone 1 lounge' Opened.
RFXCOM Debug processing: 4 2 1 0 0 (04 02 01 00 00)
RFXCOM Debug ACK Message ACK, transmit OK
RFXCOM Debug ++++++++++++++
RFXCOM Debug sent "blinds wollemi" on
RFXCOM Debug Actions...TurnOff
RFXCOM Debug Turn BlindsT1234 Appliance/Dimmer Off (level 0).
RFXCOM Debug Address 24F505
RFXCOM Debug housecode:0
RFXCOM Debug address1 and 2 and 3 = 36 , 245 , 5
RFXCOM Debug device type:BlindsT1234
RFXCOM Debug device subtype:6 / Command:Off
RFXCOM Debug device level:0
RFXCOM Debug PackData:=: 25 3 0 36 245 5 0 0 0 (19 03 00 24 F5 05 00 00 00)
RFXCOM Debug send x10 cmd: 9 25 3 0 36 245 5 0 0 0 (09 19 03 00 24 F5 05 00 00 00)
RFXCOM Debug sent "blinds wollemi" off
RFXCOM Debug processing: 4 2 1 0 0 (04 02 01 00 00)
RFXCOM Debug ACK Message ACK, transmit OK
RFXCOM Debug ++++++++++++++
Stop Unit Code 0
(09 19 03 4A 24 F5 05 01 02 71)
(09 19 03 51 24 F5 05 01 02 71)
(09 19 03 52 24 F5 05 01 02 71)
Stop Unit Code 1
(09 19 03 58 24 F5 05 01 02 71)
(09 19 03 59 24 F5 05 01 02 71)
(09 19 03 5A 24 F5 05 01 02 71)
RFXCOM Debug processing: 9 25 3 103 36 245 5 1 2 113 (09 19 03 67 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Error Error in plugin execution runConcurrentThread:
Traceback (most recent call last):
File "plugin.py", line 308, in runConcurrentThread
File "/Library/Application Support/Perceptive Automation/Indigo 7.4/Plugins/RFXCOM.indigoPlugin/Contents/Server Plugin/RFXTRX.py", line 2338, in startComm
File "/Library/Application Support/Perceptive Automation/Indigo 7.4/Plugins/RFXCOM.indigoPlugin/Contents/Server Plugin/RFXTRX.py", line 809, in processPacket
File "/Library/Application Support/Perceptive Automation/Indigo 7.4/Plugins/RFXCOM.indigoPlugin/Contents/Server Plugin/RFXTRX.py", line 46, in _finalizeStatesChanges
KeyError: key id 1297126934 not found in database
RFXCOM Error plugin runConcurrentThread function returned or failed (will attempt again in 10 seconds)
RFXCOM Debug runConcurrentThread called
RFXCOM Debug startComm called
RFXCOM Debug processing: 9 25 3 104 36 245 5 1 2 113 (09 19 03 68 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Error Error in plugin execution runConcurrentThread:
Traceback (most recent call last):
File "plugin.py", line 308, in runConcurrentThread
File "/Library/Application Support/Perceptive Automation/Indigo 7.4/Plugins/RFXCOM.indigoPlugin/Contents/Server Plugin/RFXTRX.py", line 2338, in startComm
File "/Library/Application Support/Perceptive Automation/Indigo 7.4/Plugins/RFXCOM.indigoPlugin/Contents/Server Plugin/RFXTRX.py", line 809, in processPacket
File "/Library/Application Support/Perceptive Automation/Indigo 7.4/Plugins/RFXCOM.indigoPlugin/Contents/Server Plugin/RFXTRX.py", line 46, in _finalizeStatesChanges
KeyError: key id 1297126934 not found in database
RFXCOM Error plugin runConcurrentThread function returned or failed (will attempt again in 10 seconds)
RFXCOM Debug runConcurrentThread called
RFXCOM Debug startComm called
RFXCOM Debug processing: 10 82 1
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:44:47', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 74 36 245 5 1 2 113 (09 19 03 4A 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:44:48', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 75 36 245 5 1 2 113 (09 19 03 4B 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:44:49', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 76 36 245 5 1 2 113 (09 19 03 4C 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:44:50', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:46:14', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 80 36 245 5 1 2 113 (09 19 03 50 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:46:15', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 81 36 245 5 1 2 113 (09 19 03 51 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:46:17', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 82 36 245 5 1 2 113 (09 19 03 52 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:46:17', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 10 82 1 83 252 1 0 201 49 1 105 (0A 52 01 53 FC 01 00 C9 31 01 69)
RFXCOM Debug Temp sensor 508 now 20.10 degrees and 49 humidity.
RFXCOM Debug Temp sensor 508 in list
RFXCOM Debug UpdateMinMax state temperature value 20.1
RFXCOM Debug check if new day: last date 2020/08/16, new date 2020/08/16
RFXCOM Debug UpdateMinMax state humidity value 49.0
RFXCOM Debug check if new day: last date 2020/08/16, new date 2020/08/16
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 9 25 3 87 36 245 5 1 2 113 (09 19 03 57 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:48:31', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 88 36 245 5 1 2 113 (09 19 03 58 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:48:32', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 89 36 245 5 1 2 113 (09 19 03 59 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:48:33', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 90 36 245 5 1 2 113 (09 19 03 5A 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:48:33', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
agame wrote:no problem!
here are some logs:
Blind configured as unit 0 [blind 1 on the multi-remote] stop:
- Code:
RFXCOM Debug processing: 9 25 3 3 36 245 5 1 2 113 (09 19 03 03 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:07:43', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
blind configured as 1 (which is blind 2 on remote) 'stop':
- Code:
RFXCOM Debug processing: 9 25 3 6 36 245 5 1 2 113 (09 19 03 06 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:08:51', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
blind configured as 3 [which, oddly, is 3 on the remote......previously, I has unit code 3 enrolled to work all the blinds simultaneously...obviously I can replicate this by stringing together 3 commands but it's weird it seems to have changed since the update ] 'stop'
- Code:
RFXCOM Debug processing: 9 25 3 17 36 245 5 1 2 113 (09 19 03 11 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:14:53', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 3 36 245 5 1 2 113 (09 19 03 03 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:07:43', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 6 36 245 5 1 2 113 (09 19 03 06 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:08:51', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 17 36 245 5 1 2 113 (09 19 03 11 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:14:53', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 26 36 245 5 1 0 113 (09 19 03 1A 24 F5 05 01 00 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 0 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Open
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Open', 'key': u'command'}, {'value': False, 'key': u'onOffState'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:19:40', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Open
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Open', 'key': u'command'}, {'value': False, 'key': u'onOffState'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:21:00', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 32 36 244 137 1 0 113 (09 19 03 20 24 F4 89 01 00 71)
RFXCOM Debug Blinds Remote with id1-3 384537 and unitcode 1 command 0 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38453701 received
RFXCOM Debug HouseCode:24F489
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Error unknown device detected (type = 25). Select a BlindsT1234 Device from the list of devices
RFXCOM Error HouseCode (hex)=24F489 ,subtype (int)=3 ,unitCode (int)=1
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 9 25 3 3 36 245 5 1 2 113 (09 19 03 03 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:07:43', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 6 36 245 5 1 2 113 (09 19 03 06 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:08:51', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 17 36 245 5 1 2 113 (09 19 03 11 24 F5 05 01 02 71)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:blinds middle copy :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 13:14:53', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 4
RFXCOM Debug processing: 9 25 3 102 36 245 5 1 2 112 (09 19 03 66 24 F5 05 01 02 70)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Debug Blinds Remote with subtype 3 and sensor 38450501 received
RFXCOM Debug HouseCode:24F505
RFXCOM Debug Subtype:3
RFXCOM Debug UnitCode:1
RFXCOM Debug Switch Command 38450501 in list, command=Stop
RFXCOM Debug ++++++++++++++
RFXCOM Debug finalizeStatesChanges:new blinds lounge :[{'value': 'Stop', 'key': u'command'}, {'value': 3, 'key': u'type'}, {'value': '2020/08/16 09:29:11', 'key': u'lastUpdated'}]
RFXCOM Debug address1,2,3,house = 36 , 245 , 5 , 1
RFXCOM Error unknown device detected (type = 25). Select a BlindsT1234 Device from the list of devices
RFXCOM Error HouseCode (hex)=3F5EE0 ,subtype (int)=3 ,unitCode (int)=0
RFXCOM Error unknown device detected (type = 25). Select a BlindsT1234 Device from the list of devices
RFXCOM Error HouseCode (hex)=3F5EE0 ,subtype (int)=3 ,unitCode (int)=0
As you say, the correct ERROR message would have saved a lot of time!
Packettype = BLINDS1
subtype = A-OK AC114
Sequence nbr = 28
id1-3 = 3F5EE0 decimal:4153056
Unit = 1
Command = Open
Signal level = 7 -64dBm
------------------------------------------------
Sequence nbr = 34
Command = Stop
------------------------------------------------
Sequence nbr = 35
Command = Close
RFXCOM Debug processing: 9 25 3 0 63 94 224 0 0 112 (09 19 03 00 3F 5E E0 00 00 70)
RFXCOM Debug Blinds Remote with id1-3 639624 and unitcode 0 command 0 received
RFXCOM Error unknown device detected (id = 63962400, type = 25). Select a Blinds Remote from the list of devices
RFXCOM Debug processing: 9 25 3 225 36 245 5 1 2 112 (09 19 03 E1 24 F5 05 01 02 70)
RFXCOM Debug Blinds Remote with id1-3 384505 and unitcode 1 command 2 received
RFXCOM Error unknown device detected (id = 38450501, type = 25). Select a Blinds Remote from the list of devices
RFXCOM Debug ++++++++++++++